Class MetafileRecorderGraphics2D
Class MetafileRecorderGraphics2D
Името на пространството: Aspose.Imaging.FileFormats.Emf.Graphics Асамблея: Aspose.Imaging.dll (25.5.0)
Метафилите записват графики
public abstract class MetafileRecorderGraphics2DInheritance
object ← MetafileRecorderGraphics2D
Derived
EmfRecorderGraphics2D , WmfRecorderGraphics2D
наследници
object.GetType() , object.MemberwiseClone() , object.ToString() , object.Equals(object?) , object.Equals(object?, object?) , object.ReferenceEquals(object?, object?) , object.GetHashCode()
Properties
BackgroundColor
Получава или поставя цвета на фона.
public Color BackgroundColor { get; set; }стойност на имота
BackgroundMode
Получава или задава режим на фона.
protected int BackgroundMode { get; set; }стойност на имота
Clip
Получава или задава регион, който ограничава областта на рисуването на тази Графика
public Region Clip { get; set; }стойност на имота
ClipBounds
Осигурява се клипът.
public RectangleF ClipBounds { get; }стойност на имота
Methods
Clear()
Разчиства състоянието на графичния обект
public void Clear()DrawArc(Пън, ректанг, плув, плав)
Държи арка, която представлява част от елипса, посочен от структурата на ректума.
public void DrawArc(Pen pen, Rectangle rect, float startAngle, float arcAngle)Parameters
pen Pen
Пена, която определя цвета, ширината и стила на фигурата.
rect Rectangle
Границите на елипсата.
startAngle float
ъгълът в градуса се измерва на часовника от x-аксеса до изходната точка на арката.
arcAngle float
ъгълът в градуса се измерва с часовнико от началния параметърAngle до края на точката на арка.
Examples
Този пример показва как да създадете изображение на WMF и да рисувате някои геометрични форми, като използвате WmfRecorderGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
// This is the default screen resolution.
int dpi = 96;
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight);
// Create a WMF image.
Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D(frame, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Wmf.WmfImage wmfImage = graphics.EndRecording())
{
wmfImage.Save(dir + "test.output.wmf");
}Този пример показва как да се създаде EMF изображение и рисува някои геометрични форми върху него с помощта на EmfRecorderGraphics2D.
string dir = "c:\\temp\\";
// The image size in pixels
int deviceWidth = 600;
int deviceHeight = 400;
// The image size in millimiters
int deviceWidthMm = (int)(deviceWidth / 100f);
int deviceHeightMm = (int)(deviceHeight / 100f);
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight);
// Create a EMF image.
Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D(
frame,
new Aspose.Imaging.Size(deviceWidth, deviceHeight),
new Aspose.Imaging.Size(deviceWidthMm, deviceHeightMm));
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, deviceWidth, deviceHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, deviceWidth, deviceHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, deviceHeight, deviceWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Emf.EmfImage emfImage = graphics.EndRecording())
{
emfImage.Save(dir + "test.output.emf");
}DrawCubicBezier(Точка, точка, точка и точка)
Направете кубически безиер.
public void DrawCubicBezier(Pen pen, Point pt1, Point pt2, Point pt3, Point pt4)Parameters
pen Pen
Пена, която определя цвета, ширината и стила на фигурата.
pt1 Point
Начална точка на кривата.
pt2 Point
Първата контролна точка за кривата.
pt3 Point
Втората контролна точка за кривата.
pt4 Point
Крайната точка на кривата.
Examples
Този пример показва как да създадете изображение на WMF и да рисувате някои геометрични форми, като използвате WmfRecorderGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
// This is the default screen resolution.
int dpi = 96;
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight);
// Create a WMF image.
Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D(frame, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Wmf.WmfImage wmfImage = graphics.EndRecording())
{
wmfImage.Save(dir + "test.output.wmf");
}Този пример показва как да се създаде EMF изображение и рисува някои геометрични форми върху него с помощта на EmfRecorderGraphics2D.
string dir = "c:\\temp\\";
// The image size in pixels
int deviceWidth = 600;
int deviceHeight = 400;
// The image size in millimiters
int deviceWidthMm = (int)(deviceWidth / 100f);
int deviceHeightMm = (int)(deviceHeight / 100f);
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight);
// Create a EMF image.
Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D(
frame,
new Aspose.Imaging.Size(deviceWidth, deviceHeight),
new Aspose.Imaging.Size(deviceWidthMm, deviceHeightMm));
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, deviceWidth, deviceHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, deviceWidth, deviceHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, deviceHeight, deviceWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Emf.EmfImage emfImage = graphics.EndRecording())
{
emfImage.Save(dir + "test.output.emf");
}DrawEllipse(Пън, ректонгъл)
Направете елипса.
public void DrawEllipse(Pen pen, Rectangle rect)Parameters
pen Pen
Пена, която определя цвета, ширината и стила на фигурата.
rect Rectangle
Границите на елипсата.
DrawImage(Снимка, точка)
Изтеглете посоченото изображение, като използвате първоначалния си физически размер, на определеното място.
public void DrawImage(RasterImage image, Point location)Parameters
image RasterImage
Изображението трябва да се рисува.
location Point
Мястото на горния ляв ъгъл на изображението.
DrawImage(RasterImage, Rectangle, Ректангъл, Графики)
Натиснете определената част на посоченото изображение на определено място и с посочения размер.
public void DrawImage(RasterImage image, Rectangle destRect, Rectangle srcRect, GraphicsUnit srcUnit)Parameters
image RasterImage
Изображението трябва да се рисува.
destRect Rectangle
Структура на правоъгълника, която посочва местоположението и размера на изображението.
srcRect Rectangle
Ректанкова структура, която определя частта на изображението на обекта, който трябва да се рисува.
srcUnit GraphicsUnit
Единиците за измерване, използвани от параметъра srcRect.
Examples
Този пример показва как да създадете изображение на WMF и да рисувате някои геометрични форми, като използвате WmfRecorderGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
// This is the default screen resolution.
int dpi = 96;
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight);
// Create a WMF image.
Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D(frame, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Wmf.WmfImage wmfImage = graphics.EndRecording())
{
wmfImage.Save(dir + "test.output.wmf");
}Този пример показва как да се създаде EMF изображение и рисува някои геометрични форми върху него с помощта на EmfRecorderGraphics2D.
string dir = "c:\\temp\\";
// The image size in pixels
int deviceWidth = 600;
int deviceHeight = 400;
// The image size in millimiters
int deviceWidthMm = (int)(deviceWidth / 100f);
int deviceHeightMm = (int)(deviceHeight / 100f);
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight);
// Create a EMF image.
Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D(
frame,
new Aspose.Imaging.Size(deviceWidth, deviceHeight),
new Aspose.Imaging.Size(deviceWidthMm, deviceHeightMm));
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, deviceWidth, deviceHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, deviceWidth, deviceHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, deviceHeight, deviceWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Emf.EmfImage emfImage = graphics.EndRecording())
{
emfImage.Save(dir + "test.output.emf");
}Exceptions
srcUnit; Поддържа само Pixel единица
DrawImage(Бийт[], Rectangle, GraphicsUnit)
Направете изображението.
public void DrawImage(byte[] imageBytes, Rectangle destRect, GraphicsUnit srcUnit)Parameters
imageBytes byte
[]
Изображението има байтове.
destRect Rectangle
Справедливостта на деста.
srcUnit GraphicsUnit
Източна единица .
DrawImage(Поток, ректонгъл, графики)
Направете изображението.
public void DrawImage(Stream stream, Rectangle destRect, GraphicsUnit srcUnit)Parameters
stream Stream
на потока .
destRect Rectangle
Справедливостта на деста.
srcUnit GraphicsUnit
Източна единица .
DrawLine(Пълен, инт, int и т)
Натиснете линията.
public void DrawLine(Pen pen, int x1, int y1, int x2, int y2)Parameters
pen Pen
Пена, която определя цвета, ширината и стила на фигурата.
x1 int
X-координат на първата точка.
y1 int
Координатът на първата точка.
x2 int
X-координат на втората точка.
y2 int
Координатът на втората точка.
Examples
Този пример показва как да създадете изображение на WMF и да рисувате някои геометрични форми, като използвате WmfRecorderGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
// This is the default screen resolution.
int dpi = 96;
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight);
// Create a WMF image.
Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D(frame, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Wmf.WmfImage wmfImage = graphics.EndRecording())
{
wmfImage.Save(dir + "test.output.wmf");
}Този пример показва как да се създаде EMF изображение и рисува някои геометрични форми върху него с помощта на EmfRecorderGraphics2D.
string dir = "c:\\temp\\";
// The image size in pixels
int deviceWidth = 600;
int deviceHeight = 400;
// The image size in millimiters
int deviceWidthMm = (int)(deviceWidth / 100f);
int deviceHeightMm = (int)(deviceHeight / 100f);
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight);
// Create a EMF image.
Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D(
frame,
new Aspose.Imaging.Size(deviceWidth, deviceHeight),
new Aspose.Imaging.Size(deviceWidthMm, deviceHeightMm));
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, deviceWidth, deviceHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, deviceWidth, deviceHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, deviceHeight, deviceWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Emf.EmfImage emfImage = graphics.EndRecording())
{
emfImage.Save(dir + "test.output.emf");
}DrawLine(Точка, точка и точка)
Натиснете линията.
public void DrawLine(Pen pen, Point pt1, Point pt2)Parameters
pen Pen
Пена, която определя цвета, ширината и стила на фигурата.
pt1 Point
Първата точка .
pt2 Point
Втората точка .
DrawPath(Пенис, GraphicsPath)
Направете пътя.
public void DrawPath(Pen pen, GraphicsPath path)Parameters
pen Pen
Пена, която определя цвета, ширината и стила на фигурата.
path GraphicsPath
Пътят за рисуване.
Examples
Този пример показва как да създадете изображение на WMF и да рисувате някои геометрични форми, като използвате WmfRecorderGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
// This is the default screen resolution.
int dpi = 96;
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight);
// Create a WMF image.
Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D(frame, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Wmf.WmfImage wmfImage = graphics.EndRecording())
{
wmfImage.Save(dir + "test.output.wmf");
}Този пример показва как да се създаде EMF изображение и рисува някои геометрични форми върху него с помощта на EmfRecorderGraphics2D.
string dir = "c:\\temp\\";
// The image size in pixels
int deviceWidth = 600;
int deviceHeight = 400;
// The image size in millimiters
int deviceWidthMm = (int)(deviceWidth / 100f);
int deviceHeightMm = (int)(deviceHeight / 100f);
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight);
// Create a EMF image.
Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D(
frame,
new Aspose.Imaging.Size(deviceWidth, deviceHeight),
new Aspose.Imaging.Size(deviceWidthMm, deviceHeightMm));
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, deviceWidth, deviceHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, deviceWidth, deviceHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, deviceHeight, deviceWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Emf.EmfImage emfImage = graphics.EndRecording())
{
emfImage.Save(dir + "test.output.emf");
}DrawPie(Пън, ректанг, плув, плав)
Дръжте петата.
public void DrawPie(Pen pen, Rectangle rect, float startAngle, float sweepAngle)Parameters
pen Pen
Пена, която определя цвета, ширината и стила на фигурата.
rect Rectangle
Границите на елипсата.
startAngle float
ъгълът в градуса се измерва на часовника от x-аксеса до изходната точка на арката.
sweepAngle float
ъгълът в градуса се измерва с часовнико от началния параметърAngle до края на точката на арка.
DrawPolyCubicBezier(Пътят, точка[])
Направете поли кубически безиер.
public void DrawPolyCubicBezier(Pen pen, Point[] points)Parameters
pen Pen
Пена, която определя цвета, ширината и стила на фигурата.
points Point
[]
Тези точки .
Exceptions
Броят на точките в диапазона трябва да бъде няколко от 3 плюс 1, като 4, 7 или 10.
DrawPolygon(Пътят, точка[])
Направете полигон.
public void DrawPolygon(Pen pen, Point[] points)Parameters
pen Pen
Пена, която определя цвета, ширината и стила на фигурата.
points Point
[]
Тези точки .
DrawPolyline(Пътят, точка[])
Направете си полилин.
public void DrawPolyline(Pen pen, Point[] points)Parameters
pen Pen
Пена, която определя цвета, ширината и стила на фигурата.
points Point
[]
Тези точки .
DrawRectangle(Пълен, инт, int и т)
Направете правоъгълник.
public void DrawRectangle(Pen pen, int x, int y, int width, int height)Parameters
pen Pen
Пена, която определя цвета, ширината и стила на фигурата.
x int
X-координат на горния ляв ъгъл на правоугаото да се рисува.
y int
Y-координатът на горния ляв ъгъл на ректума да се извлече.
width int
Ширината на правоъгълника да се рисува.
height int
Височината на правоъгълника да се рисува.
Examples
Този пример показва как да създадете изображение на WMF и да рисувате някои геометрични форми, като използвате WmfRecorderGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
// This is the default screen resolution.
int dpi = 96;
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight);
// Create a WMF image.
Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D(frame, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Wmf.WmfImage wmfImage = graphics.EndRecording())
{
wmfImage.Save(dir + "test.output.wmf");
}Този пример показва как да се създаде EMF изображение и рисува някои геометрични форми върху него с помощта на EmfRecorderGraphics2D.
string dir = "c:\\temp\\";
// The image size in pixels
int deviceWidth = 600;
int deviceHeight = 400;
// The image size in millimiters
int deviceWidthMm = (int)(deviceWidth / 100f);
int deviceHeightMm = (int)(deviceHeight / 100f);
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight);
// Create a EMF image.
Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D(
frame,
new Aspose.Imaging.Size(deviceWidth, deviceHeight),
new Aspose.Imaging.Size(deviceWidthMm, deviceHeightMm));
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, deviceWidth, deviceHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, deviceWidth, deviceHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, deviceHeight, deviceWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Emf.EmfImage emfImage = graphics.EndRecording())
{
emfImage.Save(dir + "test.output.emf");
}DrawRectangle(Пън, ректонгъл)
Направете правоъгълник.
public void DrawRectangle(Pen pen, Rectangle rectangle)Parameters
pen Pen
Пена, която определя цвета, ширината и стила на фигурата.
rectangle Rectangle
Прекъсът да се рисува.
DrawString(Стринг, Font, Цвет, Int, int)
Направете лентата.
public void DrawString(string @string, Font font, Color color, int x, int y)Parameters
string string
и лентата.
font Font
Снимка, която определя текстовия формат на лентата.
color Color
Цветът на текста.
x int
X-координатът на горния ляв ъгъл на рисувания текст.
y int
Y-координатът на горния ляв ъгъл на рисувания текст.
Examples
Този пример показва как да изтеглите изображение EMF от файл и да рисувате текстова лента над него.
string dir = "c:\\temp\\";
using (Aspose.Imaging.FileFormats.Emf.EmfImage emfImage = (Aspose.Imaging.FileFormats.Emf.EmfImage)Aspose.Imaging.Image.Load(dir + "test.emf"))
{
Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D graphics =
Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D.FromEmfImage(emfImage);
// First, get the image size
int width = emfImage.Width;
int height = emfImage.Height;
// Second, calculate a transformation to put a text string along the main diagonal of the image -
// from the upper-left to the bootom-right corner.
float emFontSize = 96f;
float d = (float)System.Math.Sqrt(width * width + height * height);
float scaleFactor = d / (emFontSize * 5f);
float tan = ((float)height) / width;
double radians = System.Math.Atan(tan);
double degrees = (180 * radians) / System.Math.PI;
Aspose.Imaging.Matrix transform = new Aspose.Imaging.Matrix();
transform.Rotate((float)degrees);
transform.Scale(scaleFactor, scaleFactor);
// Then, set the transform.
graphics.SetTransform(transform);
// Finally, put a watermark (text string of pink color) along the main diagonal.
graphics.DrawString("WATERMARK", new Aspose.Imaging.Font("Courier New", emFontSize), Aspose.Imaging.Color.LightPink, 0, 0/*, (float)degrees*/);
// Save the image with watermark to another EMF file.
using (Aspose.Imaging.FileFormats.Emf.EmfImage scaledEmfImage = graphics.EndRecording())
{
scaledEmfImage.Save(dir + "test.scaled.emf");
}
}Този пример показва как да създадете изображение на WMF и да рисувате някои геометрични форми, като използвате WmfRecorderGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
// This is the default screen resolution.
int dpi = 96;
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight);
// Create a WMF image.
Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D(frame, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Wmf.WmfImage wmfImage = graphics.EndRecording())
{
wmfImage.Save(dir + "test.output.wmf");
}Този пример показва как да се създаде EMF изображение и рисува някои геометрични форми върху него с помощта на EmfRecorderGraphics2D.
string dir = "c:\\temp\\";
// The image size in pixels
int deviceWidth = 600;
int deviceHeight = 400;
// The image size in millimiters
int deviceWidthMm = (int)(deviceWidth / 100f);
int deviceHeightMm = (int)(deviceHeight / 100f);
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight);
// Create a EMF image.
Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D(
frame,
new Aspose.Imaging.Size(deviceWidth, deviceHeight),
new Aspose.Imaging.Size(deviceWidthMm, deviceHeightMm));
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, deviceWidth, deviceHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, deviceWidth, deviceHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, deviceHeight, deviceWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Emf.EmfImage emfImage = graphics.EndRecording())
{
emfImage.Save(dir + "test.output.emf");
}DrawString(Стринг, Font, Color, Int, int, Float)
Направете лентата.
public void DrawString(string @string, Font font, Color color, int x, int y, float angle)Parameters
string string
и лентата.
font Font
Снимка, която определя текстовия формат на лентата.
color Color
Цветът на текста.
x int
X-координатът на горния ляв ъгъл на рисувания текст.
y int
Y-координатът на горния ляв ъгъл на рисувания текст.
angle float
Ъгълът в градуса, между вектора на изтичане и x-аксеса на устройството.Векторът за изтичане е паралелен с основната линия на ред от текст.
ExcludeClip(Rectangle)
Актуализира клипния регион на тази Графика, за да изключи зоната, определена от структурата на Ректангъл.
public void ExcludeClip(Rectangle rect)Parameters
rect Rectangle
Структура на правоъгълника, която посочва правоугала, за да се изключи от клипната област.
ExcludeClip(Region)
Актуализира клип региона на тази Графика, за да изключи областта, посочена от регион.
public void ExcludeClip(Region region)Parameters
region Region
Регион, който посочва региона да бъде изключен от клип региона.
FillEllipse(Бруш, ректонгъл)
Запълва елипсата.
public void FillEllipse(Brush brush, Rectangle rect)Parameters
brush Brush
Брушка, която определя характеристиките на пълненето.
rect Rectangle
Границите на елипсата.
FillPath(Пенис, четка, GraphicsPath)
Пътят се изпълва.
public void FillPath(Pen pen, Brush brush, GraphicsPath path)Parameters
pen Pen
Пена, която определя цвета, ширината и стила на фигурата.
brush Brush
Брушка, която определя характеристиките на пълненето.
path GraphicsPath
Пътят да се попълни.
Examples
Този пример показва как да създадете изображение на WMF и да рисувате някои геометрични форми, като използвате WmfRecorderGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
// This is the default screen resolution.
int dpi = 96;
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight);
// Create a WMF image.
Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D(frame, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Wmf.WmfImage wmfImage = graphics.EndRecording())
{
wmfImage.Save(dir + "test.output.wmf");
}Този пример показва как да се създаде EMF изображение и рисува някои геометрични форми върху него с помощта на EmfRecorderGraphics2D.
string dir = "c:\\temp\\";
// The image size in pixels
int deviceWidth = 600;
int deviceHeight = 400;
// The image size in millimiters
int deviceWidthMm = (int)(deviceWidth / 100f);
int deviceHeightMm = (int)(deviceHeight / 100f);
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight);
// Create a EMF image.
Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D(
frame,
new Aspose.Imaging.Size(deviceWidth, deviceHeight),
new Aspose.Imaging.Size(deviceWidthMm, deviceHeightMm));
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, deviceWidth, deviceHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, deviceWidth, deviceHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, deviceHeight, deviceWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Emf.EmfImage emfImage = graphics.EndRecording())
{
emfImage.Save(dir + "test.output.emf");
}FillPie(Бруш, ректонгъл, плув, плав)
Запълва петата.
public void FillPie(Brush brush, Rectangle rect, float startAngle, float sweepAngle)Parameters
brush Brush
Брушка, която определя характеристиките на пълненето.
rect Rectangle
Границите на елипсата.
startAngle float
ъгълът в градуса се измерва на часовника от x-аксеса до изходната точка на арката.
sweepAngle float
ъгълът в градуса се измерва с часовнико от началния параметърAngle до края на точката на арка.
Examples
Този пример показва как да създадете изображение на WMF и да рисувате някои геометрични форми, като използвате WmfRecorderGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
// This is the default screen resolution.
int dpi = 96;
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight);
// Create a WMF image.
Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D(frame, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Wmf.WmfImage wmfImage = graphics.EndRecording())
{
wmfImage.Save(dir + "test.output.wmf");
}Този пример показва как да се създаде EMF изображение и рисува някои геометрични форми върху него с помощта на EmfRecorderGraphics2D.
string dir = "c:\\temp\\";
// The image size in pixels
int deviceWidth = 600;
int deviceHeight = 400;
// The image size in millimiters
int deviceWidthMm = (int)(deviceWidth / 100f);
int deviceHeightMm = (int)(deviceHeight / 100f);
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight);
// Create a EMF image.
Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D(
frame,
new Aspose.Imaging.Size(deviceWidth, deviceHeight),
new Aspose.Imaging.Size(deviceWidthMm, deviceHeightMm));
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, deviceWidth, deviceHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, deviceWidth, deviceHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, deviceHeight, deviceWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Emf.EmfImage emfImage = graphics.EndRecording())
{
emfImage.Save(dir + "test.output.emf");
}FillPolygon(Бруш, точка[])
Запълване на полигона.
public void FillPolygon(Brush brush, Point[] points)Parameters
brush Brush
Брушка, която определя характеристиките на пълненето.
points Point
[]
Тези точки .
FillPolygon(Бруш, точка[]Филмът)
Запълване на полигона.
public void FillPolygon(Brush brush, Point[] points, FillMode fillMode)Parameters
brush Brush
Брушка, която определя характеристиките на пълненето.
points Point
[]
Тези точки .
fillMode FillMode
Мода за пълнене.
FillRectangle(Бруш, ректонгъл)
Запълване на правоъгълника.
public void FillRectangle(Brush brush, Rectangle rectangle)Parameters
brush Brush
Брушка, която определя характеристиките на пълненето.
rectangle Rectangle
Пътят да се попълни.
Examples
Този пример показва как да създадете изображение на WMF и да рисувате някои геометрични форми, като използвате WmfRecorderGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
// This is the default screen resolution.
int dpi = 96;
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight);
// Create a WMF image.
Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D(frame, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Wmf.WmfImage wmfImage = graphics.EndRecording())
{
wmfImage.Save(dir + "test.output.wmf");
}Този пример показва как да се създаде EMF изображение и рисува някои геометрични форми върху него с помощта на EmfRecorderGraphics2D.
string dir = "c:\\temp\\";
// The image size in pixels
int deviceWidth = 600;
int deviceHeight = 400;
// The image size in millimiters
int deviceWidthMm = (int)(deviceWidth / 100f);
int deviceHeightMm = (int)(deviceHeight / 100f);
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight);
// Create a EMF image.
Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D(
frame,
new Aspose.Imaging.Size(deviceWidth, deviceHeight),
new Aspose.Imaging.Size(deviceWidthMm, deviceHeightMm));
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, deviceWidth, deviceHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, deviceWidth, deviceHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, deviceHeight, deviceWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Emf.EmfImage emfImage = graphics.EndRecording())
{
emfImage.Save(dir + "test.output.emf");
}GetTransform()
Светът се трансформира.
public Matrix GetTransform()Returns
Трансформацията на матрицата.
IntersectClip(Ректангъл)
Актуализира клип региона на тази Графика до пресечението на текущата клипа региона и посочената структура на Ректангъл.
public void IntersectClip(RectangleF rect)Parameters
rect RectangleF
Ректоъгълната структура да се пресече с текущия клип регион.
IntersectClip(Region)
Актуализира клип региона на тази Графика до пресечението на текущата клипа региона и посочения регион.
public void IntersectClip(Region region)Parameters
region Region
Регионът трябва да пресича с настоящия регион.
MultiplyTransform(Matrix)
Умножава трансформацията на света на тази графика и определя матрицата.
public void MultiplyTransform(Matrix matrix)Parameters
matrix Matrix
Матрицата, която умножава трансформацията на света.
MultiplyTransform(Матрица, MatrixOrder)
Умножава световната трансформация на тази графика и посочва матрицата в посочения ред.
public void MultiplyTransform(Matrix matrix, MatrixOrder order)Parameters
matrix Matrix
Матрицата, която умножава трансформацията на света.
order MatrixOrder
Редът на множеството.
ResetClip()
Възстановете клипа.
public void ResetClip()RotateTransform(Флота)
Прилага посочената ротация към трансформационната матрица на тази Графика.
public void RotateTransform(float angle)Parameters
angle float
Ъгълът на ротацията в градуса.
RotateTransform(Флоат, PointF, MatrixOrder)
Прилага посочената ротация към трансформационната матрица на тази Графика в посочения ред.
public void RotateTransform(float angle, PointF center, MatrixOrder order)Parameters
angle float
Ъгълът на ротацията в градуса.
center PointF
Центърът на ротацията.
order MatrixOrder
Определя дали ротацията е прикрепена или привързана към матричната трансформация.
ScaleTransform(Плавател, плавател)
Прилага специфицираната скалираща операция на трансформационната матрица на тази Графика, като я привързва към трансформирането на обекта.
public void ScaleTransform(float sx, float sy)Parameters
sx float
Факторът на скалата в x посока.
sy float
Фактор на скалата в и посока.
ScaleTransform(Плава, плава и MatrixOrder)
Прилага посочената скалираща операция на трансформационната матрица на тази Графика в посочения ред.
public void ScaleTransform(float sx, float sy, MatrixOrder order)Parameters
sx float
Факторът на скалата в x посока.
sy float
Фактор на скалата в и посока.
order MatrixOrder
Определя дали операцията за скалиране е привързана или прикрепена към матрицата за трансформация.
SetTransform(Matrix)
Определяне на трансформацията.
public void SetTransform(Matrix transform)Parameters
transform Matrix
Новата трансформация на матрицата.
Examples
Този пример показва как да изтеглите изображение EMF от файл и да рисувате текстова лента над него.
string dir = "c:\\temp\\";
using (Aspose.Imaging.FileFormats.Emf.EmfImage emfImage = (Aspose.Imaging.FileFormats.Emf.EmfImage)Aspose.Imaging.Image.Load(dir + "test.emf"))
{
Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D graphics =
Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D.FromEmfImage(emfImage);
// First, get the image size
int width = emfImage.Width;
int height = emfImage.Height;
// Second, calculate a transformation to put a text string along the main diagonal of the image -
// from the upper-left to the bootom-right corner.
float emFontSize = 96f;
float d = (float)System.Math.Sqrt(width * width + height * height);
float scaleFactor = d / (emFontSize * 5f);
float tan = ((float)height) / width;
double radians = System.Math.Atan(tan);
double degrees = (180 * radians) / System.Math.PI;
Aspose.Imaging.Matrix transform = new Aspose.Imaging.Matrix();
transform.Rotate((float)degrees);
transform.Scale(scaleFactor, scaleFactor);
// Then, set the transform.
graphics.SetTransform(transform);
// Finally, put a watermark (text string of pink color) along the main diagonal.
graphics.DrawString("WATERMARK", new Aspose.Imaging.Font("Courier New", emFontSize), Aspose.Imaging.Color.LightPink, 0, 0/*, (float)degrees*/);
// Save the image with watermark to another EMF file.
using (Aspose.Imaging.FileFormats.Emf.EmfImage scaledEmfImage = graphics.EndRecording())
{
scaledEmfImage.Save(dir + "test.scaled.emf");
}
}TranslateTransform(Плавател, плавател)
Променя произхода на координатната система, като предвежда конкретния превод към трансформационната матрица на тази Графика.
public void TranslateTransform(float x, float y)Parameters
x float
X-координат на превода.
y float
Y-координат на превода.
TranslateTransform(Плава, плава и MatrixOrder)
Променя произхода на координатната система, като прилага специфицирания превод към матрицата за преобразуване на тази Графика в определен ред.
public void TranslateTransform(float x, float y, MatrixOrder order)Parameters
x float
X-координат на превода.
y float
Y-координат на превода.
order MatrixOrder
Определя дали преводът е препендиран или приложен към матрицата за преобразуване.
