Class SvgGraphics2D
Class SvgGraphics2D
Името на пространството: Aspose.Imaging.FileFormats.Svg.Graphics Асамблея: Aspose.Imaging.dll (25.4.0)
Осигурява рисуване на композиции, за да състави Svg изображение.
public class SvgGraphics2DInheritance
наследници
object.GetType() , object.MemberwiseClone() , object.ToString() , object.Equals(object?) , object.Equals(object?, object?) , object.ReferenceEquals(object?, object?) , object.GetHashCode()
Constructors
График 2D(Инт, инт, инт)
Иницијализира нова инстанция на клас Aspose.Imaging.FileFormats.Svg.Graphics.D.
public SvgGraphics2D(int width, int height, int dpi)Parameters
width int
Ширина на изхода на изображението Svg.
height int
Ширина на изхода на изображението Svg.
dpi int
Резолюция на устройството, например 96 точки на инча.
Examples
Този пример показва как да се създаде SVG изображение на посочения размер и да го растеризира на PNG.
string dir = "c:\\temp\\";
int imageWidth = 100;
int imageHeight = 100;
int dpi = 96;
// Create an SVG image of 100x100 px.
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
Aspose.Imaging.Pen pen = new Aspose.Imaging.Pen(Aspose.Imaging.Color.Yellow, 10);
Aspose.Imaging.Brushes.SolidBrush brush = new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Red);
// Fill the entire image in red.
// Draw a yellow rectangle of 10px wide along the image boundaries.
graphics.FillRectangle(pen, brush, 0, 0, imageWidth, imageHeight);
// Get the final Svg image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}Този пример показва как да се създаде SVG изображение на посочения размер и рисува различни форми върху него с помощта на SvgGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}График 2D(SvgImage)
Иницијализира нова инстанция на клас Aspose.Imaging.FileFormats.Svg.Graphics.D.
public SvgGraphics2D(SvgImage image)Parameters
image SvgImage
Изображение за извършване на операциите по рисуване.
Methods
DrawArc(Пън, ректанг, плув, плав)
Държи арка, която представлява част от елипса, посочен от структурата на ректума.
public void DrawArc(Pen pen, Rectangle rect, float startAngle, float arcAngle)Parameters
pen Pen
Пена, за да извлече извода на фигурата.
rect Rectangle
Границите на елипсата.
startAngle float
Уголът в градуса се измерва на часовника от х-аксеса до изходната точка на арката.
arcAngle float
Уголът в градуса се измерва на часовника от началния параметърAngle до края на точката на арката.
Examples
Този пример показва как да се създаде SVG изображение на посочения размер и рисува различни форми върху него с помощта на SvgGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}DrawCubicBezier(Пътеводител: Pointf, PointF, PointsF)
Направете кубически безиер.
public void DrawCubicBezier(Pen pen, PointF pt1, PointF pt2, PointF pt3, PointF pt4)Parameters
pen Pen
Пена, която определя цвета, ширината и стила на фигурата.
pt1 PointF
Начална точка на кривата.
pt2 PointF
Първата контролна точка за кривата.
pt3 PointF
Втората контролна точка за кривата.
pt4 PointF
Крайната точка на кривата.
Examples
Този пример показва как да се създаде SVG изображение на посочения размер и рисува различни форми върху него с помощта на SvgGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}DrawImage(Снимка, точка)
Направете изображението на посоченото място.
public void DrawImage(RasterImage image, Point origin)Parameters
image RasterImage
Изображението е направено.
origin Point
Мястото на изображението.
DrawImage(Снимка, точка и размери)
Направете изображението на посочения размер в посоченото местоположение.
public void DrawImage(RasterImage image, Point origin, Size size)Parameters
image RasterImage
Изображението е направено.
origin Point
Мястото на изображението.
size Size
Желаният размер на изображението.
Examples
Този пример показва как да се създаде SVG изображение на посочения размер и рисува различни форми върху него с помощта на SvgGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}DrawImage(Ректангъл, Rectangle, RasterImage)
Направете посочената част на изображението на посочено място и с посочения размер.
public void DrawImage(Rectangle srcRect, Rectangle destRect, RasterImage image)Parameters
srcRect Rectangle
Част от изображението на обекта да се рисува.
destRect Rectangle
Размерът и местоположението на изображението.Снимката е скалирана, за да съответства на правоъгълника.
image RasterImage
Изображението трябва да се рисува.
DrawLine(Пълен, инт, int и т)
Натиснете линията.
public void DrawLine(Pen pen, int x1, int y1, int x2, int y2)Parameters
pen Pen
Пена, която определя цвета, ширината и стила на фигурата.
x1 int
X-координат на първата точка.
y1 int
Координатът на първата точка.
x2 int
X-координат на втората точка.
y2 int
Координатът на втората точка.
Examples
Този пример показва как да се създаде SVG изображение на посочения размер и рисува различни форми върху него с помощта на SvgGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}DrawPath(Пенис, GraphicsPath)
Направете пътя.
public void DrawPath(Pen pen, GraphicsPath path)Parameters
pen Pen
Пена, за да извлече извода на фигурата.
path GraphicsPath
Пътят за рисуване.
Examples
Този пример показва как да се създаде SVG изображение на посочения размер и рисува различни форми върху него с помощта на SvgGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}DrawRectangle(Пълен, инт, int и т)
Направете правоъгълник.
public void DrawRectangle(Pen pen, int x, int y, int width, int height)Parameters
pen Pen
Пена, за да извлече извода на фигурата.
x int
X-координат на горния ляв ъгъл на правоугаото да се рисува.
y int
Y-координатът на горния ляв ъгъл на ректума да се извлече.
width int
Ширината на правоъгълника да се рисува.
height int
Височината на правоъгълника да се рисува.
Examples
Този пример показва как да се създаде SVG изображение на посочения размер и рисува различни форми върху него с помощта на SvgGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}DrawString(Снимка, лента, точка, цвят)
Изтеглете текстовата лента.
public void DrawString(Font font, string text, Point origin, Color textColor)Parameters
font Font
Използва се шрифтът за представяне на текст.
text string
Уникална текстова лента.
origin Point
В горния ляв ъгъл на текста се изпълнява.
textColor Color
Цветът на текста.
Examples
Този пример показва как да се създаде SVG изображение на посочения размер и рисува различни форми върху него с помощта на SvgGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}EndRecording()
Получава окончателния Svg изображение, което включва всички команди за рисуване, изпълнени чрез Aspose.Imaging.FileFormats.Svg.Graphics.
public SvgImage EndRecording()Returns
Последната снимка на Св.
Examples
Този пример показва как да се създаде SVG изображение на посочения размер и рисува различни форми върху него с помощта на SvgGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}FillArc(Pen, Brush, Rectangle, плувен, плавен)
Попълва арка, която представлява част от елипса, определен от структурата на ректума.
public void FillArc(Pen pen, Brush brush, Rectangle rect, float startAngle, float arcAngle)Parameters
pen Pen
Пена, за да извлече извода на фигурата.
brush Brush
За да се попълни вътрешността на фигурата.
rect Rectangle
Границите на елипсата.
startAngle float
Уголът в градуса се измерва на часовника от х-аксеса до изходната точка на арката.
arcAngle float
Уголът в градуса се измерва на часовника от началния параметърAngle до края на точката на арката.
Examples
Този пример показва как да се създаде SVG изображение на посочения размер и рисува различни форми върху него с помощта на SvgGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}FillPath(Пенис, четка, GraphicsPath)
Пътят се изпълва.
public void FillPath(Pen pen, Brush brush, GraphicsPath path)Parameters
pen Pen
Пена, за да извлече извода на фигурата.
brush Brush
За да се попълни вътрешността на фигурата.
path GraphicsPath
Пътят за рисуване.
Examples
Този пример показва как да се създаде SVG изображение на посочения размер и рисува различни форми върху него с помощта на SvgGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}FillRectangle(Пън, четка, инт, int, и т)
Запълване на правоъгълника.
public void FillRectangle(Pen pen, Brush brush, int x, int y, int width, int height)Parameters
pen Pen
Пена, за да извлече извода на фигурата.
brush Brush
За да се попълни вътрешността на фигурата.
x int
X-координат на горния ляв ъгъл на правоугаото да се рисува.
y int
Y-координатът на горния ляв ъгъл на ректума да се извлече.
width int
Ширината на правоъгълника да се рисува.
height int
Височината на правоъгълника да се рисува.
Examples
Този пример показва как да се създаде SVG изображение на посочения размер и рисува различни форми върху него с помощта на SvgGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}
