Class SvgGraphics2D
Class SvgGraphics2D
نام ها : Aspose.Imaging.FileFormats.Svg.Graphics جمع آوری: Aspose.Imaging.dll (25.5.0)
اجازه می دهد تا دستورالعمل ها را برای ساختن یک تصویر Svg طراحی کند.
public class SvgGraphics2DInheritance
اعضای ارثی
object.GetType() , object.MemberwiseClone() , object.ToString() , object.Equals(object?) , object.Equals(object?, object?) , object.ReferenceEquals(object?, object?) , object.GetHashCode()
Constructors
گرافیک2D(int، int، int، int)
یک مثال جدید از کلاس Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D آغاز می شود.
public SvgGraphics2D(int width, int height, int dpi)Parameters
width int
عرض تصویر خروجی Svg.
height int
عرض تصویر خروجی Svg.
dpi int
رزولوشن دستگاه: 96 نقطه در اینچ
Examples
این مثال نشان می دهد که چگونه یک تصویر SVG از اندازه مشخص شده ایجاد کنید و آن را به PNG رها کنید.
string dir = "c:\\temp\\";
int imageWidth = 100;
int imageHeight = 100;
int dpi = 96;
// Create an SVG image of 100x100 px.
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
Aspose.Imaging.Pen pen = new Aspose.Imaging.Pen(Aspose.Imaging.Color.Yellow, 10);
Aspose.Imaging.Brushes.SolidBrush brush = new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Red);
// Fill the entire image in red.
// Draw a yellow rectangle of 10px wide along the image boundaries.
graphics.FillRectangle(pen, brush, 0, 0, imageWidth, imageHeight);
// Get the final Svg image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}این مثال نشان می دهد که چگونه یک تصویر SVG از اندازه مشخص شده ایجاد کنید و با استفاده از SvgGraphics2D اشکال مختلفی بر روی آن نقاشی کنید.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}گرافیک2D(SvgImage)
یک مثال جدید از کلاس Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D آغاز می شود.
public SvgGraphics2D(SvgImage image)Parameters
image SvgImage
تصویر برای انجام عملیات نقاشی بر روی.
Methods
DrawArc(قفسه، قفسه، قفسه، قفسه)
یک قوس را نشان می دهد که بخشی از یک الیپس را نشان می دهد که توسط یک ساختار مستطیل مشخص شده است.
public void DrawArc(Pen pen, Rectangle rect, float startAngle, float arcAngle)Parameters
pen Pen
قلم برای کشیدن نمودار شکل.
rect Rectangle
محدودیت های الیپسی
startAngle float
زاویه در درجه ها به صورت ساعت از محور x تا نقطه شروع قوس اندازه گیری شده است.
arcAngle float
زاویه در درجه ها به صورت ساعت از پارامتر شروع به پایان نقطه قوس اندازه گیری شده است.
Examples
این مثال نشان می دهد که چگونه یک تصویر SVG از اندازه مشخص شده ایجاد کنید و با استفاده از SvgGraphics2D اشکال مختلفی بر روی آن نقاشی کنید.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}DrawCubicBezier(پین، PointF، PointF، PointF)
بلیط کوبیک بلیط کوبیک
public void DrawCubicBezier(Pen pen, PointF pt1, PointF pt2, PointF pt3, PointF pt4)Parameters
pen Pen
قلم که رنگ، عرض و سبک شکل را تعیین می کند.
pt1 PointF
نقطه شروع منحنی
pt2 PointF
اولین نقطه کنترل برای منحنی
pt3 PointF
دومین نقطه کنترل برای منحنی
pt4 PointF
نقطه پایان منحنی است.
Examples
این مثال نشان می دهد که چگونه یک تصویر SVG از اندازه مشخص شده ایجاد کنید و با استفاده از SvgGraphics2D اشکال مختلفی بر روی آن نقاشی کنید.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}DrawImage(نمره، نقطه)
تصویر مشخص شده را در محل مشخص شده نشان دهید.
public void DrawImage(RasterImage image, Point origin)Parameters
image RasterImage
تصویر کشیده شده است.
origin Point
موقعیت تصویر کشیده شده
DrawImage(RasterImage، نقطه، اندازه)
تصویر مشخص شده از اندازه مشخص شده در محل مشخص شده را نشان می دهد.
public void DrawImage(RasterImage image, Point origin, Size size)Parameters
image RasterImage
تصویر کشیده شده است.
origin Point
موقعیت تصویر کشیده شده
size Size
اندازه مورد نظر تصویر کشیده شده
Examples
این مثال نشان می دهد که چگونه یک تصویر SVG از اندازه مشخص شده ایجاد کنید و با استفاده از SvgGraphics2D اشکال مختلفی بر روی آن نقاشی کنید.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}DrawImage(Rectangle، Rectangle، RasterImage)
بخش مشخص شده تصویر را در محل مشخص شده و با اندازه مشخص شده نشان دهید.
public void DrawImage(Rectangle srcRect, Rectangle destRect, RasterImage image)Parameters
srcRect Rectangle
بخشی از تصویر هدف برای نقاشی است.
destRect Rectangle
موقعیت و اندازه تصویر کشیده شده.تصویر برای مطابقت با مستطیل مقیاس داده شده است.
image RasterImage
تصویر برای نقاشی
DrawLine(پین، int، int، int، int)
خط را کشید.
public void DrawLine(Pen pen, int x1, int y1, int x2, int y2)Parameters
pen Pen
قلم که رنگ، عرض و سبک شکل را تعیین می کند.
x1 int
هماهنگی x از نقطه اول
y1 int
۱- هماهنگی نقطه اول
x2 int
هماهنگی x از نقطه دوم
y2 int
هماهنگی و هماهنگی نقطه دوم
Examples
این مثال نشان می دهد که چگونه یک تصویر SVG از اندازه مشخص شده ایجاد کنید و با استفاده از SvgGraphics2D اشکال مختلفی بر روی آن نقاشی کنید.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}DrawPath(گرافیک، گرافیک)
مسیر را برگردانید.
public void DrawPath(Pen pen, GraphicsPath path)Parameters
pen Pen
قلم برای کشیدن نمودار شکل.
path GraphicsPath
راهی برای کشیدن
Examples
این مثال نشان می دهد که چگونه یک تصویر SVG از اندازه مشخص شده ایجاد کنید و با استفاده از SvgGraphics2D اشکال مختلفی بر روی آن نقاشی کنید.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}DrawRectangle(پین، int، int، int، int)
به سمت راست حرکت می کند.
public void DrawRectangle(Pen pen, int x, int y, int width, int height)Parameters
pen Pen
قلم برای کشیدن نمودار شکل.
x int
هماهنگی x از گوشه بالا سمت چپ مستطیل برای کشیدن.
y int
هماهنگی Y از گوشه سمت چپ بالا از مستطیل برای کشیدن.
width int
پهنای باند دایره ای برای کشیدن است.
height int
ارتفاع دایره ای که باید کشیده شود
Examples
این مثال نشان می دهد که چگونه یک تصویر SVG از اندازه مشخص شده ایجاد کنید و با استفاده از SvgGraphics2D اشکال مختلفی بر روی آن نقاشی کنید.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}DrawString(فونت، شاخه، نقطه، رنگ)
بر روی خط متن کلیک کنید.
public void DrawString(Font font, string text, Point origin, Color textColor)Parameters
font Font
این فونت برای ساختن متن استفاده می شود.
text string
خطای متن یونیکد
origin Point
گوشه ی سمت چپ متن در حال اجرا است.
textColor Color
رنگ متن است.
Examples
این مثال نشان می دهد که چگونه یک تصویر SVG از اندازه مشخص شده ایجاد کنید و با استفاده از SvgGraphics2D اشکال مختلفی بر روی آن نقاشی کنید.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}EndRecording()
به تصویر نهایی Svg که شامل تمام دستورات نقاشی انجام شده از طریق Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D اشیاء.
public SvgImage EndRecording()Returns
تصویر نهایی اسماعیلی
Examples
این مثال نشان می دهد که چگونه یک تصویر SVG از اندازه مشخص شده ایجاد کنید و با استفاده از SvgGraphics2D اشکال مختلفی بر روی آن نقاشی کنید.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}FillArc(فلفل، فلفل، فلفل، فلفل)
پر کردن یک قوس نشان دهنده بخشی از یک الیپس مشخص شده توسط یک ساختار راست زاویه است.
public void FillArc(Pen pen, Brush brush, Rectangle rect, float startAngle, float arcAngle)Parameters
pen Pen
قلم برای کشیدن نمودار شکل.
brush Brush
برش برای پر کردن داخل شکل.
rect Rectangle
محدودیت های الیپسی
startAngle float
زاویه در درجه ها به صورت ساعت از محور x تا نقطه شروع قوس اندازه گیری شده است.
arcAngle float
زاویه در درجه ها به صورت ساعت از پارامتر شروع به پایان نقطه قوس اندازه گیری شده است.
Examples
این مثال نشان می دهد که چگونه یک تصویر SVG از اندازه مشخص شده ایجاد کنید و با استفاده از SvgGraphics2D اشکال مختلفی بر روی آن نقاشی کنید.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}FillPath(قلم، برش، گرافیک)
مسیر را پر می کند.
public void FillPath(Pen pen, Brush brush, GraphicsPath path)Parameters
pen Pen
قلم برای کشیدن نمودار شکل.
brush Brush
برش برای پر کردن داخل شکل.
path GraphicsPath
راهی برای کشیدن
Examples
این مثال نشان می دهد که چگونه یک تصویر SVG از اندازه مشخص شده ایجاد کنید و با استفاده از SvgGraphics2D اشکال مختلفی بر روی آن نقاشی کنید.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}FillRectangle(قلم، برش، int، int، int، int)
دایره را پر می کند.
public void FillRectangle(Pen pen, Brush brush, int x, int y, int width, int height)Parameters
pen Pen
قلم برای کشیدن نمودار شکل.
brush Brush
برش برای پر کردن داخل شکل.
x int
هماهنگی x از گوشه بالا سمت چپ مستطیل برای کشیدن.
y int
هماهنگی Y از گوشه سمت چپ بالا از مستطیل برای کشیدن.
width int
پهنای باند دایره ای برای کشیدن است.
height int
ارتفاع دایره ای که باید کشیده شود
Examples
این مثال نشان می دهد که چگونه یک تصویر SVG از اندازه مشخص شده ایجاد کنید و با استفاده از SvgGraphics2D اشکال مختلفی بر روی آن نقاشی کنید.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}
