Class MetafileRecorderGraphics2D
Class MetafileRecorderGraphics2D
ja nimityö: Aspose.Imaging.FileFormats.Emf.Graphics Kokoelma: Aspose.Imaging.dll (25.4.0)
Metafiilit tallentavat grafiikkaa
public abstract class MetafileRecorderGraphics2DInheritance
object ← MetafileRecorderGraphics2D
Derived
EmfRecorderGraphics2D , WmfRecorderGraphics2D
Perintöjäsenet
object.GetType() , object.MemberwiseClone() , object.ToString() , object.Equals(object?) , object.Equals(object?, object?) , object.ReferenceEquals(object?, object?) , object.GetHashCode()
Properties
BackgroundColor
Antaa tai asettaa taustan väri.
public Color BackgroundColor { get; set; }Omistuksen arvo
BackgroundMode
Valitse tai asettaa taustamuoto.
protected int BackgroundMode { get; set; }Omistuksen arvo
Clip
Saa tai asettaa alue, joka rajoittaa tämän grafiikan piirrejä
public Region Clip { get; set; }Omistuksen arvo
ClipBounds
Saa klipin rajat.
public RectangleF ClipBounds { get; }Omistuksen arvo
Methods
Clear()
Selviää graafisen kohteen tilaa
public void Clear()DrawArc(Pen, Rectangle, float, float)
Drao arkin, joka edustaa osa ellipsistä, jota on määritelty suorakylän rakenteella.
public void DrawArc(Pen pen, Rectangle rect, float startAngle, float arcAngle)Parameters
pen Pen
Pen, joka määrittää kuvan värin, leveyden ja tyylin.
rect Rectangle
Ellipsin rajat.
startAngle float
Kynttilät asteissa mitataan kellonaikaisesti x-aksista arkin lähtökohtaan.
arcAngle float
Kynttilät asteissa mitataan kellonaikaisesti alustaAngle-parametrista arkin pisteen päättymiseen.
Examples
Tämä esimerkki näyttää, miten luoda WMF-kuva ja piirrellä joitakin geometrisia muotoja käyttämällä WmfRecorderGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
// This is the default screen resolution.
int dpi = 96;
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight);
// Create a WMF image.
Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D(frame, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Wmf.WmfImage wmfImage = graphics.EndRecording())
{
wmfImage.Save(dir + "test.output.wmf");
}Tämä esimerkki näyttää, miten luoda EMF-kuva ja piirrellä joitakin geometrisia muotoja sen avulla EmfRecorderGraphics2D.
string dir = "c:\\temp\\";
// The image size in pixels
int deviceWidth = 600;
int deviceHeight = 400;
// The image size in millimiters
int deviceWidthMm = (int)(deviceWidth / 100f);
int deviceHeightMm = (int)(deviceHeight / 100f);
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight);
// Create a EMF image.
Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D(
frame,
new Aspose.Imaging.Size(deviceWidth, deviceHeight),
new Aspose.Imaging.Size(deviceWidthMm, deviceHeightMm));
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, deviceWidth, deviceHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, deviceWidth, deviceHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, deviceHeight, deviceWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Emf.EmfImage emfImage = graphics.EndRecording())
{
emfImage.Save(dir + "test.output.emf");
}DrawCubicBezier(Pieni, piste, piste, piste)
Tutustu kuutioinen bezier.
public void DrawCubicBezier(Pen pen, Point pt1, Point pt2, Point pt3, Point pt4)Parameters
pen Pen
Pen, joka määrittää kuvan värin, leveyden ja tyylin.
pt1 Point
Se on kurkun lähtökohta.
pt2 Point
Ensimmäinen ohjauspiste kurssille.
pt3 Point
Toinen ohjauspiste kurssille.
pt4 Point
Kurvan lopullinen piste.
Examples
Tämä esimerkki näyttää, miten luoda WMF-kuva ja piirrellä joitakin geometrisia muotoja käyttämällä WmfRecorderGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
// This is the default screen resolution.
int dpi = 96;
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight);
// Create a WMF image.
Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D(frame, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Wmf.WmfImage wmfImage = graphics.EndRecording())
{
wmfImage.Save(dir + "test.output.wmf");
}Tämä esimerkki näyttää, miten luoda EMF-kuva ja piirrellä joitakin geometrisia muotoja sen avulla EmfRecorderGraphics2D.
string dir = "c:\\temp\\";
// The image size in pixels
int deviceWidth = 600;
int deviceHeight = 400;
// The image size in millimiters
int deviceWidthMm = (int)(deviceWidth / 100f);
int deviceHeightMm = (int)(deviceHeight / 100f);
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight);
// Create a EMF image.
Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D(
frame,
new Aspose.Imaging.Size(deviceWidth, deviceHeight),
new Aspose.Imaging.Size(deviceWidthMm, deviceHeightMm));
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, deviceWidth, deviceHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, deviceWidth, deviceHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, deviceHeight, deviceWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Emf.EmfImage emfImage = graphics.EndRecording())
{
emfImage.Save(dir + "test.output.emf");
}DrawEllipse(Rektangle ja rektangle)
Pysäytä ellipsi.
public void DrawEllipse(Pen pen, Rectangle rect)Parameters
pen Pen
Pen, joka määrittää kuvan värin, leveyden ja tyylin.
rect Rectangle
Ellipsin rajat.
DrawImage(Lähde, piste)
Kuvaa määritelty kuva, käyttämällä alkuperäistä fyysistä kokoa, määritetyssä paikassa.
public void DrawImage(RasterImage image, Point location)Parameters
image RasterImage
Kuvia on kuvata.
location Point
Kuvan vasemman yläkulman sijainti.
DrawImage(RasterImage, Rectangle ja GraphicsUnit)
Valitse kuvatun kuvan määritelty osa määritetyssä paikassa ja määrätyn koon mukaan.
public void DrawImage(RasterImage image, Rectangle destRect, Rectangle srcRect, GraphicsUnit srcUnit)Parameters
image RasterImage
Kuvia on kuvata.
destRect Rectangle
Rectangle -rakenne, joka määrittää kuvan sijainnin ja koon. Kuvaa skalataan oikea-osaan.
srcRect Rectangle
Rectangle -rakenne, joka määrittää kuvan kohteen osan.
srcUnit GraphicsUnit
mittayksiköt, joita käytetään srcRect-parametriin.
Examples
Tämä esimerkki näyttää, miten luoda WMF-kuva ja piirrellä joitakin geometrisia muotoja käyttämällä WmfRecorderGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
// This is the default screen resolution.
int dpi = 96;
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight);
// Create a WMF image.
Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D(frame, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Wmf.WmfImage wmfImage = graphics.EndRecording())
{
wmfImage.Save(dir + "test.output.wmf");
}Tämä esimerkki näyttää, miten luoda EMF-kuva ja piirrellä joitakin geometrisia muotoja sen avulla EmfRecorderGraphics2D.
string dir = "c:\\temp\\";
// The image size in pixels
int deviceWidth = 600;
int deviceHeight = 400;
// The image size in millimiters
int deviceWidthMm = (int)(deviceWidth / 100f);
int deviceHeightMm = (int)(deviceHeight / 100f);
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight);
// Create a EMF image.
Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D(
frame,
new Aspose.Imaging.Size(deviceWidth, deviceHeight),
new Aspose.Imaging.Size(deviceWidthMm, deviceHeightMm));
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, deviceWidth, deviceHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, deviceWidth, deviceHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, deviceHeight, deviceWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Emf.EmfImage emfImage = graphics.EndRecording())
{
emfImage.Save(dir + "test.output.emf");
}Exceptions
srcUnit;Tuki vain Pixel-yksikköä
DrawImage(bytejä[], Rectangle, GraphicsUnit)
Pidä kuvaa kiinni.
public void DrawImage(byte[] imageBytes, Rectangle destRect, GraphicsUnit srcUnit)Parameters
imageBytes byte
[]
Kuva on bytejä.
destRect Rectangle
Se on oikea reitti.
srcUnit GraphicsUnit
lähdeyksikköä varten.
DrawImage(Virtaa, Rectangle, GraphicsUnit)
Pidä kuvaa kiinni.
public void DrawImage(Stream stream, Rectangle destRect, GraphicsUnit srcUnit)Parameters
stream Stream
ja virtauksen.
destRect Rectangle
Se on oikea reitti.
srcUnit GraphicsUnit
lähdeyksikköä varten.
DrawLine(Pieni, int, int, int, int)
Pidä linja kiinni.
public void DrawLine(Pen pen, int x1, int y1, int x2, int y2)Parameters
pen Pen
Pen, joka määrittää kuvan värin, leveyden ja tyylin.
x1 int
Ensimmäisen kohdan x koordinaatti.
y1 int
Ensimmäisen kohdan y-koordinaatti.
x2 int
Toisen pisteen x-koordinaatti.
y2 int
Toisen kohdan y-koordinaatti.
Examples
Tämä esimerkki näyttää, miten luoda WMF-kuva ja piirrellä joitakin geometrisia muotoja käyttämällä WmfRecorderGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
// This is the default screen resolution.
int dpi = 96;
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight);
// Create a WMF image.
Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D(frame, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Wmf.WmfImage wmfImage = graphics.EndRecording())
{
wmfImage.Save(dir + "test.output.wmf");
}Tämä esimerkki näyttää, miten luoda EMF-kuva ja piirrellä joitakin geometrisia muotoja sen avulla EmfRecorderGraphics2D.
string dir = "c:\\temp\\";
// The image size in pixels
int deviceWidth = 600;
int deviceHeight = 400;
// The image size in millimiters
int deviceWidthMm = (int)(deviceWidth / 100f);
int deviceHeightMm = (int)(deviceHeight / 100f);
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight);
// Create a EMF image.
Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D(
frame,
new Aspose.Imaging.Size(deviceWidth, deviceHeight),
new Aspose.Imaging.Size(deviceWidthMm, deviceHeightMm));
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, deviceWidth, deviceHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, deviceWidth, deviceHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, deviceHeight, deviceWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Emf.EmfImage emfImage = graphics.EndRecording())
{
emfImage.Save(dir + "test.output.emf");
}DrawLine(Pinta, piste ja piste)
Pidä linja kiinni.
public void DrawLine(Pen pen, Point pt1, Point pt2)Parameters
pen Pen
Pen, joka määrittää kuvan värin, leveyden ja tyylin.
pt1 Point
Ensimmäinen kohta .
pt2 Point
Toinen kohta .
DrawPath(Pieni, GraphicsPath)
Pidä tie pois.
public void DrawPath(Pen pen, GraphicsPath path)Parameters
pen Pen
Pen, joka määrittää kuvan värin, leveyden ja tyylin.
path GraphicsPath
Matkalla joudutaan piirustamaan.
Examples
Tämä esimerkki näyttää, miten luoda WMF-kuva ja piirrellä joitakin geometrisia muotoja käyttämällä WmfRecorderGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
// This is the default screen resolution.
int dpi = 96;
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight);
// Create a WMF image.
Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D(frame, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Wmf.WmfImage wmfImage = graphics.EndRecording())
{
wmfImage.Save(dir + "test.output.wmf");
}Tämä esimerkki näyttää, miten luoda EMF-kuva ja piirrellä joitakin geometrisia muotoja sen avulla EmfRecorderGraphics2D.
string dir = "c:\\temp\\";
// The image size in pixels
int deviceWidth = 600;
int deviceHeight = 400;
// The image size in millimiters
int deviceWidthMm = (int)(deviceWidth / 100f);
int deviceHeightMm = (int)(deviceHeight / 100f);
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight);
// Create a EMF image.
Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D(
frame,
new Aspose.Imaging.Size(deviceWidth, deviceHeight),
new Aspose.Imaging.Size(deviceWidthMm, deviceHeightMm));
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, deviceWidth, deviceHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, deviceWidth, deviceHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, deviceHeight, deviceWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Emf.EmfImage emfImage = graphics.EndRecording())
{
emfImage.Save(dir + "test.output.emf");
}DrawPie(Pen, Rectangle, float, float)
Laita käsi kädestä.
public void DrawPie(Pen pen, Rectangle rect, float startAngle, float sweepAngle)Parameters
pen Pen
Pen, joka määrittää kuvan värin, leveyden ja tyylin.
rect Rectangle
Ellipsin rajat.
startAngle float
Kynttilät asteissa mitataan kellonaikaisesti x-aksista arkin lähtökohtaan.
sweepAngle float
Kynttilät asteissa mitataan kellonaikaisesti alustaAngle-parametrista arkin pisteen päättymiseen.
DrawPolyCubicBezier(Paikka, piste[])
Se on polykobinen bezier.
public void DrawPolyCubicBezier(Pen pen, Point[] points)Parameters
pen Pen
Pen, joka määrittää kuvan värin, leveyden ja tyylin.
points Point
[]
ja pisteitä .
Exceptions
Sarjan pisteiden lukumäärän tulisi olla useampi kuin 3 plus 1, kuten 4, 7 tai 10.
DrawPolygon(Paikka, piste[])
Jätä polygoni.
public void DrawPolygon(Pen pen, Point[] points)Parameters
pen Pen
Pen, joka määrittää kuvan värin, leveyden ja tyylin.
points Point
[]
ja pisteitä .
DrawPolyline(Paikka, piste[])
Pidä polyyliini kiinni.
public void DrawPolyline(Pen pen, Point[] points)Parameters
pen Pen
Pen, joka määrittää kuvan värin, leveyden ja tyylin.
points Point
[]
ja pisteitä .
DrawRectangle(Pieni, int, int, int, int)
Pidä oikea kulma.
public void DrawRectangle(Pen pen, int x, int y, int width, int height)Parameters
pen Pen
Pen, joka määrittää kuvan värin, leveyden ja tyylin.
x int
X-koordinaatti vasemman yläkulman reikiä piirrellä.
y int
Y-koordinaatti vasemman yläkulman reikiä vetää.
width int
Oikean kulman leveys kuvaa.
height int
Korkeus reikiä piirrettyä.
Examples
Tämä esimerkki näyttää, miten luoda WMF-kuva ja piirrellä joitakin geometrisia muotoja käyttämällä WmfRecorderGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
// This is the default screen resolution.
int dpi = 96;
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight);
// Create a WMF image.
Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D(frame, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Wmf.WmfImage wmfImage = graphics.EndRecording())
{
wmfImage.Save(dir + "test.output.wmf");
}Tämä esimerkki näyttää, miten luoda EMF-kuva ja piirrellä joitakin geometrisia muotoja sen avulla EmfRecorderGraphics2D.
string dir = "c:\\temp\\";
// The image size in pixels
int deviceWidth = 600;
int deviceHeight = 400;
// The image size in millimiters
int deviceWidthMm = (int)(deviceWidth / 100f);
int deviceHeightMm = (int)(deviceHeight / 100f);
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight);
// Create a EMF image.
Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D(
frame,
new Aspose.Imaging.Size(deviceWidth, deviceHeight),
new Aspose.Imaging.Size(deviceWidthMm, deviceHeightMm));
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, deviceWidth, deviceHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, deviceWidth, deviceHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, deviceHeight, deviceWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Emf.EmfImage emfImage = graphics.EndRecording())
{
emfImage.Save(dir + "test.output.emf");
}DrawRectangle(Rektangle ja rektangle)
Pidä oikea kulma.
public void DrawRectangle(Pen pen, Rectangle rectangle)Parameters
pen Pen
Pen, joka määrittää kuvan värin, leveyden ja tyylin.
rectangle Rectangle
Oikealla reitillä piirrätään.
DrawString(sarja, kirjain, väri, int ja int)
Pidä sarja kiinni.
public void DrawString(string @string, Font font, Color color, int x, int y)Parameters
string string
Se on string.
font Font
Teksti, joka määrittelee sarjan tekstiformaatin.
color Color
Tekstin väri on.
x int
x-koordinaatti vasemman yläkulman piirretyn tekstin.
y int
Y-koordinaatti vasemman yläkulman piirretty teksti.
Examples
Tämä esimerkki osoittaa, miten ladata EMF-kuva tiedostosta ja piirrät tekstijohdon sen yli.
string dir = "c:\\temp\\";
using (Aspose.Imaging.FileFormats.Emf.EmfImage emfImage = (Aspose.Imaging.FileFormats.Emf.EmfImage)Aspose.Imaging.Image.Load(dir + "test.emf"))
{
Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D graphics =
Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D.FromEmfImage(emfImage);
// First, get the image size
int width = emfImage.Width;
int height = emfImage.Height;
// Second, calculate a transformation to put a text string along the main diagonal of the image -
// from the upper-left to the bootom-right corner.
float emFontSize = 96f;
float d = (float)System.Math.Sqrt(width * width + height * height);
float scaleFactor = d / (emFontSize * 5f);
float tan = ((float)height) / width;
double radians = System.Math.Atan(tan);
double degrees = (180 * radians) / System.Math.PI;
Aspose.Imaging.Matrix transform = new Aspose.Imaging.Matrix();
transform.Rotate((float)degrees);
transform.Scale(scaleFactor, scaleFactor);
// Then, set the transform.
graphics.SetTransform(transform);
// Finally, put a watermark (text string of pink color) along the main diagonal.
graphics.DrawString("WATERMARK", new Aspose.Imaging.Font("Courier New", emFontSize), Aspose.Imaging.Color.LightPink, 0, 0/*, (float)degrees*/);
// Save the image with watermark to another EMF file.
using (Aspose.Imaging.FileFormats.Emf.EmfImage scaledEmfImage = graphics.EndRecording())
{
scaledEmfImage.Save(dir + "test.scaled.emf");
}
}Tämä esimerkki näyttää, miten luoda WMF-kuva ja piirrellä joitakin geometrisia muotoja käyttämällä WmfRecorderGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
// This is the default screen resolution.
int dpi = 96;
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight);
// Create a WMF image.
Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D(frame, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Wmf.WmfImage wmfImage = graphics.EndRecording())
{
wmfImage.Save(dir + "test.output.wmf");
}Tämä esimerkki näyttää, miten luoda EMF-kuva ja piirrellä joitakin geometrisia muotoja sen avulla EmfRecorderGraphics2D.
string dir = "c:\\temp\\";
// The image size in pixels
int deviceWidth = 600;
int deviceHeight = 400;
// The image size in millimiters
int deviceWidthMm = (int)(deviceWidth / 100f);
int deviceHeightMm = (int)(deviceHeight / 100f);
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight);
// Create a EMF image.
Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D(
frame,
new Aspose.Imaging.Size(deviceWidth, deviceHeight),
new Aspose.Imaging.Size(deviceWidthMm, deviceHeightMm));
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, deviceWidth, deviceHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, deviceWidth, deviceHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, deviceHeight, deviceWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Emf.EmfImage emfImage = graphics.EndRecording())
{
emfImage.Save(dir + "test.output.emf");
}DrawString(sarja, kirjain, väri, int,int, float)
Pidä sarja kiinni.
public void DrawString(string @string, Font font, Color color, int x, int y, float angle)Parameters
string string
Se on string.
font Font
Teksti, joka määrittelee sarjan tekstiformaatin.
color Color
Tekstin väri on.
x int
x-koordinaatti vasemman yläkulman piirretyn tekstin.
y int
Y-koordinaatti vasemman yläkulman piirretty teksti.
angle float
Kynttilät astetta, välissä vektorin ja laitteen x-aksin välillä.Päästötektori on rinnakkainen tekstin sarjan pohjan linjaan.
ExcludeClip(Rectangle)
Päivitetään tämän grafiikan levyalue, jotta voidaan sulkea pois Rectangle-rakenteen määrittämä alue.
public void ExcludeClip(Rectangle rect)Parameters
rect Rectangle
Rectangle rakenne, joka määrittää rektanglen sulkea pois klipin alueesta.
ExcludeClip(Region)
Päivitä tämän grafiikan levyalue, jotta alue, jonka alue on määritellyt, suljetaan pois.
public void ExcludeClip(Region region)Parameters
region Region
Alue, joka määrittelee alueen poissulkemiseksi klip-alueesta.
FillEllipse(Kynttilät, Rectangle)
Se täyttää ellipsin.
public void FillEllipse(Brush brush, Rectangle rect)Parameters
brush Brush
Brush, joka määrittää täyden ominaisuudet.
rect Rectangle
Ellipsin rajat.
FillPath(Pen, Punainen, GraphicsPath)
täyttää tietä.
public void FillPath(Pen pen, Brush brush, GraphicsPath path)Parameters
pen Pen
Pen, joka määrittää kuvan värin, leveyden ja tyylin.
brush Brush
Brush, joka määrittää täyden ominaisuudet.
path GraphicsPath
tie täyttämään.
Examples
Tämä esimerkki näyttää, miten luoda WMF-kuva ja piirrellä joitakin geometrisia muotoja käyttämällä WmfRecorderGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
// This is the default screen resolution.
int dpi = 96;
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight);
// Create a WMF image.
Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D(frame, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Wmf.WmfImage wmfImage = graphics.EndRecording())
{
wmfImage.Save(dir + "test.output.wmf");
}Tämä esimerkki näyttää, miten luoda EMF-kuva ja piirrellä joitakin geometrisia muotoja sen avulla EmfRecorderGraphics2D.
string dir = "c:\\temp\\";
// The image size in pixels
int deviceWidth = 600;
int deviceHeight = 400;
// The image size in millimiters
int deviceWidthMm = (int)(deviceWidth / 100f);
int deviceHeightMm = (int)(deviceHeight / 100f);
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight);
// Create a EMF image.
Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D(
frame,
new Aspose.Imaging.Size(deviceWidth, deviceHeight),
new Aspose.Imaging.Size(deviceWidthMm, deviceHeightMm));
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, deviceWidth, deviceHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, deviceWidth, deviceHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, deviceHeight, deviceWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Emf.EmfImage emfImage = graphics.EndRecording())
{
emfImage.Save(dir + "test.output.emf");
}FillPie(Käärme, Rectangle, Float, Float)
Se täyttää jalkan.
public void FillPie(Brush brush, Rectangle rect, float startAngle, float sweepAngle)Parameters
brush Brush
Brush, joka määrittää täyden ominaisuudet.
rect Rectangle
Ellipsin rajat.
startAngle float
Kynttilät asteissa mitataan kellonaikaisesti x-aksista arkin lähtökohtaan.
sweepAngle float
Kynttilät asteissa mitataan kellonaikaisesti alustaAngle-parametrista arkin pisteen päättymiseen.
Examples
Tämä esimerkki näyttää, miten luoda WMF-kuva ja piirrellä joitakin geometrisia muotoja käyttämällä WmfRecorderGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
// This is the default screen resolution.
int dpi = 96;
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight);
// Create a WMF image.
Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D(frame, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Wmf.WmfImage wmfImage = graphics.EndRecording())
{
wmfImage.Save(dir + "test.output.wmf");
}Tämä esimerkki näyttää, miten luoda EMF-kuva ja piirrellä joitakin geometrisia muotoja sen avulla EmfRecorderGraphics2D.
string dir = "c:\\temp\\";
// The image size in pixels
int deviceWidth = 600;
int deviceHeight = 400;
// The image size in millimiters
int deviceWidthMm = (int)(deviceWidth / 100f);
int deviceHeightMm = (int)(deviceHeight / 100f);
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight);
// Create a EMF image.
Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D(
frame,
new Aspose.Imaging.Size(deviceWidth, deviceHeight),
new Aspose.Imaging.Size(deviceWidthMm, deviceHeightMm));
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, deviceWidth, deviceHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, deviceWidth, deviceHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, deviceHeight, deviceWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Emf.EmfImage emfImage = graphics.EndRecording())
{
emfImage.Save(dir + "test.output.emf");
}FillPolygon(Painopiste, piste[])
Täytä polygoni.
public void FillPolygon(Brush brush, Point[] points)Parameters
brush Brush
Brush, joka määrittää täyden ominaisuudet.
points Point
[]
ja pisteitä .
FillPolygon(Painopiste, piste[], ja FillMode)
Täytä polygoni.
public void FillPolygon(Brush brush, Point[] points, FillMode fillMode)Parameters
brush Brush
Brush, joka määrittää täyden ominaisuudet.
points Point
[]
ja pisteitä .
fillMode FillMode
Täytyy täyttää mode.
FillRectangle(Kynttilät, Rectangle)
Täytä oikea kulma.
public void FillRectangle(Brush brush, Rectangle rectangle)Parameters
brush Brush
Brush, joka määrittää täyden ominaisuudet.
rectangle Rectangle
Oikea kulma täyttää.
Examples
Tämä esimerkki näyttää, miten luoda WMF-kuva ja piirrellä joitakin geometrisia muotoja käyttämällä WmfRecorderGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
// This is the default screen resolution.
int dpi = 96;
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight);
// Create a WMF image.
Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D(frame, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Wmf.WmfImage wmfImage = graphics.EndRecording())
{
wmfImage.Save(dir + "test.output.wmf");
}Tämä esimerkki näyttää, miten luoda EMF-kuva ja piirrellä joitakin geometrisia muotoja sen avulla EmfRecorderGraphics2D.
string dir = "c:\\temp\\";
// The image size in pixels
int deviceWidth = 600;
int deviceHeight = 400;
// The image size in millimiters
int deviceWidthMm = (int)(deviceWidth / 100f);
int deviceHeightMm = (int)(deviceHeight / 100f);
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight);
// Create a EMF image.
Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D(
frame,
new Aspose.Imaging.Size(deviceWidth, deviceHeight),
new Aspose.Imaging.Size(deviceWidthMm, deviceHeightMm));
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, deviceWidth, deviceHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, deviceWidth, deviceHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, deviceHeight, deviceWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Emf.EmfImage emfImage = graphics.EndRecording())
{
emfImage.Save(dir + "test.output.emf");
}GetTransform()
Se muuttaa maailmaa.
public Matrix GetTransform()Returns
Siirtymisen matriisi.
IntersectClip(RectangleF)
Päivitetään tämän grafiikan klip-alue nykyisen klipin alueen ja määritellyn Rectangle-rakenteen risteykselle.
public void IntersectClip(RectangleF rect)Parameters
rect RectangleF
Rectangle rakenne kytkeytyy nykyiseen clip-alueeseen.
IntersectClip(Region)
Päivitetään tämän grafiikan klip-alue nykyisen klippiryhmän ja määritellyn alueen risteykselle.
public void IntersectClip(Region region)Parameters
region Region
Alue on vuorovaikutuksessa nykyisen alueen kanssa.
MultiplyTransform(Matrix)
Moninkertaistaa tämän grafiikan maailmanmuutos ja määrittää matriisin.
public void MultiplyTransform(Matrix matrix)Parameters
matrix Matrix
Matriisi, joka moninkertaistaa maailmanmuutoksen.
MultiplyTransform(Matrix ja MatrixOrder)
Moninkertaistaa tämän grafiikan maailmanmuutos ja määrittää matriisin määritellyssä järjestyksessä.
public void MultiplyTransform(Matrix matrix, MatrixOrder order)Parameters
matrix Matrix
Matriisi, joka moninkertaistaa maailmanmuutoksen.
order MatrixOrder
ja lisääntymisen järjestys.
ResetClip()
Palauta klipsi uudelleen.
public void ResetClip()RotateTransform(Flottaa)
Soveltaa määriteltyä kääntymistä tämän grafiikan muuntamismatriisiin.
public void RotateTransform(float angle)Parameters
angle float
Pyöräyksen kulma astetta.
RotateTransform(Lähde: MatrixOrder, MatrixOrder)
Soveltaa määriteltyä kierrosta tämän grafiikan muuntamatrixiin määritetyssä järjestyksessä.
public void RotateTransform(float angle, PointF center, MatrixOrder order)Parameters
angle float
Pyöräyksen kulma astetta.
center PointF
ja kierrätyskeskuksen.
order MatrixOrder
Määritä, onko kierros kiinnitetty tai liitetään matriisin muuntamiseen.
ScaleTransform(Laivasto, laivasto)
Soveltaa määriteltyä skalantatoimintaa tämän grafiikan muuntamismatrikselle kiinnittämällä se esineen transformatiiviseen matriisiin.
public void ScaleTransform(float sx, float sy)Parameters
sx float
Skalaustekijä x suuntaan.
sy float
Skalaustekijä y suuntaan.
ScaleTransform(Matriisi, Matriisi ja Matriisi)
Soveltaa määriteltyä skalantatoimintaa tämän grafiikan muuntamatriisiin määritetyssä järjestyksessä.
public void ScaleTransform(float sx, float sy, MatrixOrder order)Parameters
sx float
Skalaustekijä x suuntaan.
sy float
Skalaustekijä y suuntaan.
order MatrixOrder
Määritetään, onko skalantatoiminta prepended tai appended transformation matrixille.
SetTransform(Matrix)
Siirry muuntaminen mukaan.
public void SetTransform(Matrix transform)Parameters
transform Matrix
Uuden matriisin muuntaminen.
Examples
Tämä esimerkki osoittaa, miten ladata EMF-kuva tiedostosta ja piirrät tekstijohdon sen yli.
string dir = "c:\\temp\\";
using (Aspose.Imaging.FileFormats.Emf.EmfImage emfImage = (Aspose.Imaging.FileFormats.Emf.EmfImage)Aspose.Imaging.Image.Load(dir + "test.emf"))
{
Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D graphics =
Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D.FromEmfImage(emfImage);
// First, get the image size
int width = emfImage.Width;
int height = emfImage.Height;
// Second, calculate a transformation to put a text string along the main diagonal of the image -
// from the upper-left to the bootom-right corner.
float emFontSize = 96f;
float d = (float)System.Math.Sqrt(width * width + height * height);
float scaleFactor = d / (emFontSize * 5f);
float tan = ((float)height) / width;
double radians = System.Math.Atan(tan);
double degrees = (180 * radians) / System.Math.PI;
Aspose.Imaging.Matrix transform = new Aspose.Imaging.Matrix();
transform.Rotate((float)degrees);
transform.Scale(scaleFactor, scaleFactor);
// Then, set the transform.
graphics.SetTransform(transform);
// Finally, put a watermark (text string of pink color) along the main diagonal.
graphics.DrawString("WATERMARK", new Aspose.Imaging.Font("Courier New", emFontSize), Aspose.Imaging.Color.LightPink, 0, 0/*, (float)degrees*/);
// Save the image with watermark to another EMF file.
using (Aspose.Imaging.FileFormats.Emf.EmfImage scaledEmfImage = graphics.EndRecording())
{
scaledEmfImage.Save(dir + "test.scaled.emf");
}
}TranslateTransform(Laivasto, laivasto)
Muuttaa koordinaattijärjestelmän alkuperää siirtämällä määritellyn käännöksen tämän grafiikan muuntamismatriisiin.
public void TranslateTransform(float x, float y)Parameters
x float
Käännöksen x koordinaatti.
y float
käännöksen y-koordinaatti.
TranslateTransform(Matriisi, Matriisi ja Matriisi)
Muuttaa koordinaattijärjestelmän alkuperää sovellamalla määriteltyä käännöstä tämän grafiikan muuntamismatriisiin määritetyssä järjestyksessä.
public void TranslateTransform(float x, float y, MatrixOrder order)Parameters
x float
Käännöksen x koordinaatti.
y float
käännöksen y-koordinaatti.
order MatrixOrder
Se määrittää, onko käännös prepended tai appended transformation matrixille.
