Class BmpImage
nazivni prostor: Aspose.Imaging.FileFormats.Bmp Sastav: Aspose.Imaging.dll (25.4.0)
Možete bez napora upravljati Bitmap (BMP) i Device Independent bitmap(DIB) datoteke, olakšavajući učinkovitu manipulaciju i obradu rasteraIzvođenje različitih operacija na slikama, ovaj API rasprostranjujeradni protok, pružajući razvijalcima pouzdan alat za rad s BMP-om iDIB formati u njihovim softverskim aplikacijama.
[JsonObject(MemberSerialization.OptIn)]
public sealed class BmpImage : RasterCachedImage, IDisposable, IObjectWithBounds, IRasterImageArgb32PixelLoader, IRasterImageRawDataLoader, IHasXmpData, IHasMetadataInheritance
object ← DisposableObject ← DataStreamSupporter ← Image ← RasterImage ← RasterCachedImage ← BmpImage
Implements
IDisposable , IObjectWithBounds , IRasterImageArgb32PixelLoader , IRasterImageRawDataLoader , IHasXmpData , IHasMetadata
naslijeđeni članovi
RasterCachedImage.CacheData() , RasterCachedImage.Blend(Point, RasterImage, Rectangle, byte) , RasterCachedImage.Resize(int, int, ResizeType) , RasterCachedImage.Resize(int, int, ImageResizeSettings) , RasterCachedImage.RotateFlip(RotateFlipType) , RasterCachedImage.Rotate(float, bool, Color) , RasterCachedImage.Crop(Rectangle) , RasterCachedImage.Dither(DitheringMethod, int, IColorPalette) , RasterCachedImage.Grayscale() , RasterCachedImage.NormalizeHistogram() , RasterCachedImage.BinarizeFixed(byte) , RasterCachedImage.BinarizeOtsu() , RasterCachedImage.BinarizeBradley(double, int) , RasterCachedImage.BinarizeBradley(double) , RasterCachedImage.AdjustBrightness(int) , RasterCachedImage.AdjustContrast(float) , RasterCachedImage.AdjustGamma(float, float, float) , RasterCachedImage.AdjustGamma(float) , RasterCachedImage.IsCached , RasterImage.RemoveMetadata() , RasterImage.Save(Stream, ImageOptionsBase, Rectangle) , RasterImage.GetModifyDate(bool) , RasterImage.Dither(DitheringMethod, int) , RasterImage.Dither(DitheringMethod, int, IColorPalette) , RasterImage.GetDefaultPixels(Rectangle, IPartialArgb32PixelLoader) , RasterImage.GetDefaultRawData(Rectangle, IPartialRawDataLoader, RawDataSettings) , RasterImage.GetDefaultArgb32Pixels(Rectangle) , RasterImage.GetDefaultRawData(Rectangle, RawDataSettings) , RasterImage.GetArgb32Pixel(int, int) , RasterImage.GetPixel(int, int) , RasterImage.SetArgb32Pixel(int, int, int) , RasterImage.SetPixel(int, int, Color) , RasterImage.ReadScanLine(int) , RasterImage.ReadArgb32ScanLine(int) , RasterImage.WriteScanLine(int, Color[]) , RasterImage.WriteArgb32ScanLine(int, int[]) , RasterImage.LoadPartialArgb32Pixels(Rectangle, IPartialArgb32PixelLoader) , RasterImage.LoadPartialPixels(Rectangle, IPartialPixelLoader) , RasterImage.LoadArgb32Pixels(Rectangle) , RasterImage.LoadArgb64Pixels(Rectangle) , RasterImage.LoadPartialArgb64Pixels(Rectangle, IPartialArgb64PixelLoader) , RasterImage.LoadPixels(Rectangle) , RasterImage.LoadCmykPixels(Rectangle) , RasterImage.LoadCmyk32Pixels(Rectangle) , RasterImage.LoadRawData(Rectangle, RawDataSettings, IPartialRawDataLoader) , RasterImage.LoadRawData(Rectangle, Rectangle, RawDataSettings, IPartialRawDataLoader) , RasterImage.SaveRawData(byte[], int, Rectangle, RawDataSettings) , RasterImage.SaveArgb32Pixels(Rectangle, int[]) , RasterImage.SavePixels(Rectangle, Color[]) , RasterImage.SaveCmykPixels(Rectangle, CmykColor[]) , RasterImage.SaveCmyk32Pixels(Rectangle, int[]) , RasterImage.SetResolution(double, double) , RasterImage.SetPalette(IColorPalette, bool) , RasterImage.Resize(int, int, ImageResizeSettings) , RasterImage.Rotate(float, bool, Color) , RasterImage.Rotate(float) , RasterImage.BinarizeFixed(byte) , RasterImage.BinarizeOtsu() , RasterImage.BinarizeBradley(double) , RasterImage.BinarizeBradley(double, int) , RasterImage.Blend(Point, RasterImage, Rectangle, byte) , RasterImage.Blend(Point, RasterImage, byte) , RasterImage.Grayscale() , RasterImage.NormalizeHistogram() , RasterImage.AdjustBrightness(int) , RasterImage.AdjustContrast(float) , RasterImage.AdjustGamma(float, float, float) , RasterImage.AdjustGamma(float) , RasterImage.GetSkewAngle() , RasterImage.NormalizeAngle() , RasterImage.NormalizeAngle(bool, Color) , RasterImage.Filter(Rectangle, FilterOptionsBase) , RasterImage.ReplaceColor(Color, byte, Color) , RasterImage.ReplaceColor(int, byte, int) , RasterImage.ReplaceNonTransparentColors(Color) , RasterImage.ReplaceNonTransparentColors(int) , RasterImage.ToBitmap() , RasterImage.PremultiplyComponents , RasterImage.UseRawData , RasterImage.UpdateXmpData , RasterImage.XmpData , RasterImage.RawIndexedColorConverter , RasterImage.RawCustomColorConverter , RasterImage.RawFallbackIndex , RasterImage.RawDataSettings , RasterImage.UsePalette , RasterImage.RawDataFormat , RasterImage.RawLineSize , RasterImage.IsRawDataAvailable , RasterImage.HorizontalResolution , RasterImage.VerticalResolution , RasterImage.HasTransparentColor , RasterImage.HasAlpha , RasterImage.TransparentColor , RasterImage.ImageOpacity , Image.CanLoad(string) , Image.CanLoad(string, LoadOptions) , Image.CanLoad(Stream) , Image.CanLoad(Stream, LoadOptions) , Image.Create(ImageOptionsBase, int, int) , Image.Create(Image[]) , Image.Create(MultipageCreateOptions) , Image.Create(string[], bool) , Image.Create(string[]) , Image.Create(Image[], bool) , Image.GetFileFormat(string) , Image.GetFileFormat(Stream) , Image.GetFittingRectangle(Rectangle, int, int) , Image.GetFittingRectangle(Rectangle, int[], int, int) , Image.Load(string, LoadOptions) , Image.Load(string) , Image.Load(Stream, LoadOptions) , Image.Load(Stream) , Image.GetProportionalWidth(int, int, int) , Image.GetProportionalHeight(int, int, int) , Image.RemoveMetadata() , Image.CanSave(ImageOptionsBase) , Image.Resize(int, int) , Image.Resize(int, int, ResizeType) , Image.Resize(int, int, ImageResizeSettings) , Image.GetDefaultOptions(object[]) , Image.GetOriginalOptions() , Image.ResizeWidthProportionally(int) , Image.ResizeHeightProportionally(int) , Image.ResizeWidthProportionally(int, ResizeType) , Image.ResizeHeightProportionally(int, ResizeType) , Image.ResizeWidthProportionally(int, ImageResizeSettings) , Image.ResizeHeightProportionally(int, ImageResizeSettings) , Image.RotateFlip(RotateFlipType) , Image.Rotate(float) , Image.Crop(Rectangle) , Image.Crop(int, int, int, int) , Image.Save() , Image.Save(string) , Image.Save(string, ImageOptionsBase) , Image.Save(string, ImageOptionsBase, Rectangle) , Image.Save(Stream, ImageOptionsBase) , Image.Save(Stream, ImageOptionsBase, Rectangle) , Image.GetSerializedStream(ImageOptionsBase, Rectangle, out int) , Image.SetPalette(IColorPalette, bool) , Image.BitsPerPixel , Image.Bounds , Image.Container , Image.Height , Image.Palette , Image.UsePalette , Image.Size , Image.Width , Image.InterruptMonitor , Image.BufferSizeHint , Image.AutoAdjustPalette , Image.HasBackgroundColor , Image.FileFormat , Image.BackgroundColor , DataStreamSupporter.CacheData() , DataStreamSupporter.Save() , DataStreamSupporter.Save(Stream) , DataStreamSupporter.Save(string) , DataStreamSupporter.Save(string, bool) , DataStreamSupporter.DataStreamContainer , DataStreamSupporter.IsCached , DisposableObject.Dispose() , DisposableObject.Disposed , object.GetType() , object.ToString() , object.Equals(object?) , object.Equals(object?, object?) , object.ReferenceEquals(object?, object?) , object.GetHashCode()
Examples
Decompress BMP slika koja je prethodno komprimirana pomoću DXT1 algoritma kompresije.
using (var image = Image.Load("CompressedTiger.bmp"))
{
image.Save("DecompressedTiger.bmp", new BmpOptions());
}Komprimirajte BMP sliku pomoću algoritma kompresije DXT1.
using (var image = Image.Load("Tiger.bmp"))
{
image.Save("CompressedTiger.bmp", new BmpOptions { Compression = BitmapCompression.Dxt1 });
}Primjer pokazuje kako ukloniti bilo koji objekt s slike pomoću Graphics Path s algoritmom Telea.
var imageFilePath = "ball.png";
using (var image = Image.Load(imageFilePath))
{
var pngImage = (PngImage)image;
var mask = new GraphicsPath();
var firstFigure = new Figure();
firstFigure.AddShape(new EllipseShape(new RectangleF(350, 170, 570 - 350, 400 - 170)));
mask.AddFigure(firstFigure);
var options = new TeleaWatermarkOptions(mask);
var result = WatermarkRemover.PaintOver(pngImage, options);
result.Save(outputPath);
}Primjer pokazuje kako izvoziti BmpImage s tipom Rgb kompresije.
string sourcePath = "input.png";
// Load a PNG image from a file.
using (Image pngImage = Image.Load(sourcePath))
{
// BMP image is saved with transparency support by default, that is achieved by using the BitmapCompression.Bitfields compression method.
// To save a BMP image with the Rgb compression method, the BmpOptions with the Compression property set to BitmapCompression.Rgb should be specified.
pngImage.Save(outputPath, new BmpOptions() { Compression = BitmapCompression.Rgb });
}Primjer pokazuje kako ukloniti bilo koji objekt s slike pomoću Graphics Path s Content Aware ispunjajući algoritam.
var imageFilePath = "ball.png";
using (var image = Image.Load(imageFilePath))
{
var pngImage = (PngImage)image;
var mask = new GraphicsPath();
var firstFigure = new Figure();
firstFigure.AddShape(new EllipseShape(new RectangleF(350, 170, 570 - 350, 400 - 170)));
mask.AddFigure(firstFigure);
var options = new ContentAwareFillWatermarkOptions(mask)
{
MaxPaintingAttempts = 4
};
var result = WatermarkRemover.PaintOver(pngImage, options);
result.Save(outputPath);
}Sljedeći primjer pokazuje kako stvoriti BMP sliku određene veličine.
string dir = "c:\\temp\\";
// Create a BMP image 100 x 100 px.
using (Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = new Aspose.Imaging.FileFormats.Bmp.BmpImage(100, 100))
{
// Fill the image with a simple linear red-black gradient.
int width = bmpImage.Width;
int height = bmpImage.Height;
for (int y = 0; y < height; y++)
{
for (int x = 0; x < width; x++)
{
int hue = (255 * x) / width;
bmpImage.SetPixel(x, y, Aspose.Imaging.Color.FromArgb(255, hue, 0, 0));
}
}
using (System.IO.FileStream stream = new System.IO.FileStream(dir + "output.bmp", System.IO.FileMode.Create))
{
bmpImage.Save(stream);
}
}Primjer prikazuje kako izvoziti BmpImage iz Png datoteke dok čuvate alfa kanal, sačuvajući bmp dosje s transparentnošću.
string sourcePath = "input.png";
// Load a PNG image from a file.
using (Image pngImage = Image.Load(sourcePath))
{
// BMP image is saved with transparency support by default.
// If you want to explicitly specify such mode, the BmpOptions's Compression property should be set to BitmapCompression.Bitfields.
// The BitmapCompression.Bitfields compression method is the default compression method in the BmpOptions.
// So the same result of exporting a Bmp image with transparency can be achieved by either one of the following ways.
// With an implicit default options:
pngImage.Save(outputPath);
// With an explicit default options:
pngImage.Save(outputPath, new BmpOptions());
// Specifying the BitmapCompression.Bitfields compression method:
pngImage.Save(outputPath, new BmpOptions() { Compression = BitmapCompression.Bitfields });
}Constructors
BmpImage(String)
Počnite koristiti BmpImage razred bez napora s ovim konstruktorom kojiinicijalizira novi primjer. savršeno za razvijatelje koji žele ustati iU tijeku s Aspose.Imaging.FileFormats.Bmp.MmpImage objekti brzo i učinkovito.
public BmpImage(string path)Parameters
path string
Put za preuzimanje slike iz i inicijalizirati pixel i palete podatke s.
Examples
Primjer pokazuje kako preuzeti BmpImage iz datoteke.
string dir = "c:\\temp\\";
// Load a BMP image from a file.
// The source pixels will be converted to 32-bpp format if required.
using (Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = new Aspose.Imaging.FileFormats.Bmp.BmpImage(dir + "sample.bmp"))
{
// Do some image processing.
// Save to another BMP file.
bmpImage.Save(dir + "sample.output.32bpp.bmp");
}Exceptions
Raster slika je nula.
Visina mora biti pozitivna.
Paleta mora biti određena za slike s 8 bitova po pikselu ili manje.
BmpImage(String, ushort, BitmapCompression, dvostruka, dvojna)
Neuspješno stvoriti novu primjenu Aspose.Imaging.FileFormats.Bmp.MmpImage razreda s ovim konstruktorom,koristeći određene parametre kao što su put, bitsPerPixel, i kompresija.tražeći inicijalizirati BmpImage predmete brzo i učinkovito, s točnom kontrolomO karakteristikama slike.
public BmpImage(string path, ushort bitsPerPixel, BitmapCompression compression, double horizontalResolution, double verticalResolution)Parameters
path string
Put za preuzimanje slike iz i inicijalizirati pixel i palete podatke s.
bitsPerPixel ushort
Bitovi po pixelima.
compression BitmapCompression
Kompresija za korištenje.
horizontalResolution double
Upozorenje zbog okretanja rezolucija koja proizlazi može se malo razlikovati od prošlog.
verticalResolution double
Napomena zbog okretanja rezolucija koja proizlazi može se malo razlikovati od prethodne.
Examples
Primjer pokazuje kako preuzeti BmpImage iz datoteke s određenom bitnom dubinom i rezolucijom.
string dir = "c:\\temp\\";
// Load a BMP image from a file.
// The source pixels will be converted to 24-bpp format if required.
// The resolution will be set to 96 dpi.
using (Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage =
new Aspose.Imaging.FileFormats.Bmp.BmpImage(dir + "sample.bmp", 24, Aspose.Imaging.FileFormats.Bmp.BitmapCompression.Rgb, 96.0, 96.0))
{
// Do some image processing.
// Save to another BMP file.
bmpImage.Save(dir + "sample.output.24bpp.96dpi.bmp");
}Exceptions
Raster slika je nula.
Visina mora biti pozitivna.
Paleta mora biti određena za slike s 8 bitova po pikselu ili manje.
BmpImage(Stream)
Počnite s korištenjem Aspose.Imaging.FileFormats.Bmp.MmpImage razreda bez napora inicijaliziranjem nove primjeres ovim konstruktorom, koristeći tok kao ulaz. savršeno za razvijatelje koji tražeprikladan način za rad s BmpImage objektima iz različitih izvora podataka,osigurati fleksibilnost i jednostavnost integracije.
public BmpImage(Stream stream)Parameters
stream Stream
Proljev za preuzimanje slike iz i inicijalizirati pixel i palete podatke s.
Examples
Primjer pokazuje kako preuzeti BmpImage iz tokova datoteke.
string dir = "c:\\temp\\";
// Load a BMP image from a file stream.
// The source pixels will be converted to 32-bpp format if required.
using (System.IO.Stream stream = System.IO.File.OpenRead(dir + "sample.bmp"))
{
using (Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = new Aspose.Imaging.FileFormats.Bmp.BmpImage(stream))
{
// Do some image processing.
// Save to another BMP file.
bmpImage.Save(dir + "sample.output.32bpp.bmp");
}
}Exceptions
Raster slika je nula.
Visina mora biti pozitivna.
Paleta mora biti određena za slike s 8 bitova po pikselu ili manje.
BmpImage(Stream, ushort, BitmapCompression, dvostruka, dvojna)
Počnite raditi s Aspose.Imaging.FileFormats.Bmp.BMpImage razred bez oštećenja stvaranjemnovi primjer pomoću struje, zajedno s određenim parametrima kao što su bitsPerPixelIdealan za razvijatelje koji traže jednostavan način za rukovanjeBmpImage objekti, osiguravajući fleksibilnost i učinkovitost u njihovim projektima.
public BmpImage(Stream stream, ushort bitsPerPixel, BitmapCompression compression, double horizontalResolution, double verticalResolution)Parameters
stream Stream
Proljev za preuzimanje slike iz i inicijalizirati pixel i palete podatke s.
bitsPerPixel ushort
Bitovi po pixelima.
compression BitmapCompression
Kompresija za korištenje.
horizontalResolution double
Upozorenje zbog okretanja rezolucija koja proizlazi može se malo razlikovati od prošlog.
verticalResolution double
Napomena zbog okretanja rezolucija koja proizlazi može se malo razlikovati od prethodne.
Examples
Primjer pokazuje kako preuzeti BmpImage iz tokova datoteke s određenom bitnom dubinom i rezolucijom.
string dir = "c:\\temp\\";
// Load a BMP image from a file stream.
// The source pixels will be converted to 24-bpp format if required.
// The resolution will be set to 96 dpi.
using (System.IO.Stream stream = System.IO.File.OpenRead(dir + "sample.bmp"))
{
using (Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage =
new Aspose.Imaging.FileFormats.Bmp.BmpImage(stream, 24, Aspose.Imaging.FileFormats.Bmp.BitmapCompression.Rgb, 96.0, 96.0))
{
// Do some image processing.
// Save to another BMP file.
bmpImage.Save(dir + "sample.output.24bpp.96dpi.bmp");
}
}Exceptions
Raster slika je nula.
Visina mora biti pozitivna.
Paleta mora biti određena za slike s 8 bitova po pikselu ili manje.
BmpImage(RasterImage)
Neuspješno stvoriti novu primjenu Aspose.Imaging.FileFormats.Bmp.BMpImage razredainicijaliziranjem s RasterImage objektom. savršeno za razvijatelje koji gledajubezuvjetno pretvoriti postojeće raster slike u format BmpImage, osiguravajućiKompatibilnost i jednostavnost integracije u svoje projekte.
public BmpImage(RasterImage rasterImage)Parameters
rasterImage RasterImage
Slika za inicijaliziranje piksela i paleta podataka s.
Examples
Primjer pokazuje kako preuzeti BmpImage iz druge primjere RasterImages-a.
string dir = "c:\\temp\\";
// Create a new PNG image.
Aspose.Imaging.ImageOptions.PngOptions createOptions = new Aspose.Imaging.ImageOptions.PngOptions();
createOptions.Source = new Aspose.Imaging.Sources.StreamSource(new System.IO.MemoryStream(), true);
using (Aspose.Imaging.RasterImage rasterImage = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Create(createOptions, 100, 100))
{
// Fill the entire PNG image in red.
Aspose.Imaging.Graphics gr = new Aspose.Imaging.Graphics(rasterImage);
Aspose.Imaging.Brushes.SolidBrush brush = new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Red);
gr.FillRectangle(brush, rasterImage.Bounds);
// Create a BMP image based on the PNG image.
// The source pixels will be converted to 32-bpp format if required.
using (Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = new Aspose.Imaging.FileFormats.Bmp.BmpImage(rasterImage))
{
// Save to a BMP file
bmpImage.Save(dir + "output.32bpp.bmp");
}
}Exceptions
Raster slika je nula.
Visina mora biti pozitivna.
Paleta mora biti određena za slike s 8 bitova po pikselu ili manje.
BmpImage(RasterImage, ushort, BitmapCompression, dvostruka, dvojna)
Počnite raditi s Aspose.Imaging.FileFormats.Bmp.BMpImage razred bez oštećenja stvaranjem nove primjerekorištenje rasterImage zajedno s određenim parametrima kao što su bitsPerPixel i kompresija.Idealan za razvijatelje koji traže jednostavan način za rukovanje BmpImage objektima,osigurati fleksibilnost i učinkovitost u svojim projektima.
public BmpImage(RasterImage rasterImage, ushort bitsPerPixel, BitmapCompression compression, double horizontalResolution, double verticalResolution)Parameters
rasterImage RasterImage
Slika za inicijaliziranje piksela i paleta podataka s.
bitsPerPixel ushort
Bitovi po pixelima.
compression BitmapCompression
Kompresija za korištenje.
horizontalResolution double
Upozorenje zbog okretanja rezolucija koja proizlazi može se malo razlikovati od prošlog.
verticalResolution double
Napomena zbog okretanja rezolucija koja proizlazi može se malo razlikovati od prethodne.
Examples
Primjer pokazuje kako preuzeti BmpImage iz druge primjere RasterImages-a s određenom dubinom bitova i kompresijom.
string dir = "c:\\temp\\";
// Create a new PNG image.
Aspose.Imaging.ImageOptions.PngOptions createOptions = new Aspose.Imaging.ImageOptions.PngOptions();
createOptions.Source = new Aspose.Imaging.Sources.StreamSource(new System.IO.MemoryStream(), true);
using (Aspose.Imaging.RasterImage rasterImage = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Create(createOptions, 100, 100))
{
// Fill the entire PNG image in red.
Aspose.Imaging.Graphics gr = new Aspose.Imaging.Graphics(rasterImage);
Aspose.Imaging.Brushes.SolidBrush brush = new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Red);
gr.FillRectangle(brush, rasterImage.Bounds);
// Create a BMP image based on the PNG image.
// The source pixels will be converted to 24-bpp format if required.
// The resolution will be set to 96 dpi.
using (Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = new Aspose.Imaging.FileFormats.Bmp.BmpImage(rasterImage, 24, Aspose.Imaging.FileFormats.Bmp.BitmapCompression.Rgb, 96.0, 96.0))
{
// Save to a BMP file
bmpImage.Save(dir + "output.24bpp.96dpi.bmp");
}
}Exceptions
Raster slika je nula.
Visina mora biti pozitivna.
Paleta mora biti određena za slike s 8 bitova po pikselu ili manje.
BmpImage(u, u)
Počnite s korištenjem Aspose.Imaging.FileFormats.Bmp.BMpImage razreda bez napora stvaranjem nove primjeresa određenim parametrima širine i visine. idealno za razvijatelje koji tražeprikladan način za stvaranje BmpImage objekata prilagođenih dimenzija, osiguravajućifleksibilnost i jednostavnost integracije u svoje projekte.
public BmpImage(int width, int height)Parameters
width int
Širina slike je širina.
height int
Visina slike je visina.
Examples
Primjer pokazuje kako stvoriti BmpImage određene veličine.
string dir = "c:\\temp\\";
// Create a 32-bpp BMP image of 100 x 100 px.
using (Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = new Aspose.Imaging.FileFormats.Bmp.BmpImage(100, 100))
{
// Fill the entire image in red.
Aspose.Imaging.Graphics gr = new Aspose.Imaging.Graphics(bmpImage);
Aspose.Imaging.Brushes.SolidBrush brush = new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Red);
gr.FillRectangle(brush, bmpImage.Bounds);
// Save to a BMP file
bmpImage.Save(dir + "output.bmp");
}Sljedeći primjer pokazuje kako paletirati BMP sliku kako bi se smanjila njezina veličina izlaska.
// Create a BMP image 100 x 100 px.
using (Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = new Aspose.Imaging.FileFormats.Bmp.BmpImage(100, 100))
{
// The linear gradient from the left-top to the right-bottom corner of the image.
Aspose.Imaging.Brushes.LinearGradientBrush brush =
new Aspose.Imaging.Brushes.LinearGradientBrush(
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(bmpImage.Width, bmpImage.Height),
Aspose.Imaging.Color.Red,
Aspose.Imaging.Color.Green);
// Fill the entire image with the linear gradient brush.
Aspose.Imaging.Graphics gr = new Aspose.Imaging.Graphics(bmpImage);
gr.FillRectangle(brush, bmpImage.Bounds);
// Get the closest 8-bit color palette which covers as many pixels as possible, so that a palettized image
// is almost visually indistinguishable from a non-palletized one.
Aspose.Imaging.IColorPalette palette = Aspose.Imaging.ColorPaletteHelper.GetCloseImagePalette(bmpImage, 256);
// 8-bit palette contains at most 256 colors.
Aspose.Imaging.ImageOptions.BmpOptions saveOptions = new Aspose.Imaging.ImageOptions.BmpOptions();
saveOptions.Palette = palette;
saveOptions.BitsPerPixel = 8;
using (System.IO.MemoryStream stream = new System.IO.MemoryStream())
{
bmpImage.Save(stream, saveOptions);
System.Console.WriteLine("The palettized image size is {0} bytes.", stream.Length);
}
using (System.IO.MemoryStream stream = new System.IO.MemoryStream())
{
bmpImage.Save(stream);
System.Console.WriteLine("The non-palettized image size is {0} bytes.", stream.Length);
}
}
// The output looks like this:
// The palettized image size is 11078 bytes.
// The non-palettized image size is 40054 bytes.Exceptions
Visina mora biti pozitivna.
Paleta mora biti određena za slike s 8 bitova po pikselu ili manje.
BmpImage(Int, int, ushort, IColorPalette)
Počnite s korištenjem Aspose.Imaging.FileFormats.Bmp.BMpImage razreda bez oštećenja inicijaliziranjem nove primjeresa parametrima kao što su širina, visine, bit dubine i paleta.razvijatelji koji traže jednostavan način za stvaranje BmpImage objekata sprilagođene dimenzije i konfiguracije boje, osiguravajući fleksibilnost i učinkovitost u njihovim projektima.
public BmpImage(int width, int height, ushort bitsPerPixel, IColorPalette palette)Parameters
width int
Širina slike je širina.
height int
Visina slike je visina.
bitsPerPixel ushort
Bitovi po pixelima.
palette IColorPalette
Boja je paleta.
Examples
Primjer pokazuje kako stvoriti BmpImage određene veličine s određenom paletom.
string dir = "c:\\temp\\";
Aspose.Imaging.Color[] paletterColors = new Aspose.Imaging.Color[]
{
Aspose.Imaging.Color.Red,
Aspose.Imaging.Color.Green,
};
// Create a monochrome palette which contains only red and green colors.
Aspose.Imaging.IColorPalette palette = new Aspose.Imaging.ColorPalette(paletterColors);
// Create a monochrome 1-bpp BMP image of 100 x 100 px.
using (Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = new Aspose.Imaging.FileFormats.Bmp.BmpImage(100, 100, 1, palette))
{
Aspose.Imaging.Graphics gr = new Aspose.Imaging.Graphics(bmpImage);
// Fill the upper half of the image in red.
Aspose.Imaging.Brushes.SolidBrush redBrush = new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Red);
gr.FillRectangle(redBrush, new Aspose.Imaging.Rectangle(0, 0, bmpImage.Width, bmpImage.Height / 2));
// Fill the lower half of the image in green.
Aspose.Imaging.Brushes.SolidBrush greenBrush = new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Green);
gr.FillRectangle(greenBrush, new Aspose.Imaging.Rectangle(0, bmpImage.Height / 2, bmpImage.Width, bmpImage.Height / 2));
// Save to BMP
bmpImage.Save(dir + "output.monochrome.bmp");
}Exceptions
Visina mora biti pozitivna.
Paleta mora biti određena za slike s 8 bitova po pikselu ili manje.
BmpImage(Int, int, ushort, IColorPalette, BitmapCompression, dvostruka, dvojna)
Neuspješno stvoriti novu primjenu Aspose.Imaging.FileFormats.Bmp.MmpImage razreda s ovim konstruktorom,specifikacije parametara kao što su širina, visine, bitsPerPixel i paleta. savršeno za razvijateljetražeći prikladan način za stvaranje BmpImage objekata s prilagođenim dimenzijamai konfiguracije boja, osiguravajući fleksibilnost i jednostavnost integracije u njihove projekte.
public BmpImage(int width, int height, ushort bitsPerPixel, IColorPalette palette, BitmapCompression compression, double horizontalResolution, double verticalResolution)Parameters
width int
Širina slike je širina.
height int
Visina slike je visina.
bitsPerPixel ushort
Bitovi po pixelima.
palette IColorPalette
Boja je paleta.
compression BitmapCompression
Kompresija za korištenje.
horizontalResolution double
Upozorenje zbog okretanja rezolucija koja proizlazi može se malo razlikovati od prošlog.
verticalResolution double
Napomena zbog okretanja rezolucija koja proizlazi može se malo razlikovati od prethodne.
Examples
Primjer pokazuje kako stvoriti BmpImage pomoću različitih opcija.
string dir = "c:\\temp\\";
Aspose.Imaging.Color[] paletterColors = new Aspose.Imaging.Color[]
{
Aspose.Imaging.Color.Red,
Aspose.Imaging.Color.Green,
};
// Create a monochrome palette which contains only red and green colors.
Aspose.Imaging.IColorPalette palette = new Aspose.Imaging.ColorPalette(paletterColors);
// Create a monochrome 1-bpp BMP image of 100 x 100 px.
// The horizontal and vertical resolution will be set to 96 dpi.
using (Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = new Aspose.Imaging.FileFormats.Bmp.BmpImage(100, 100, 1, palette, Aspose.Imaging.FileFormats.Bmp.BitmapCompression.Rgb, 96.0, 96.0))
{
Aspose.Imaging.Graphics gr = new Aspose.Imaging.Graphics(bmpImage);
// Fill the upper half of the image in red.
Aspose.Imaging.Brushes.SolidBrush redBrush = new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Red);
gr.FillRectangle(redBrush, new Aspose.Imaging.Rectangle(0, 0, bmpImage.Width, bmpImage.Height / 2));
// Fill the lower half of the image in green.
Aspose.Imaging.Brushes.SolidBrush greenBrush = new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Green);
gr.FillRectangle(greenBrush, new Aspose.Imaging.Rectangle(0, bmpImage.Height / 2, bmpImage.Width, bmpImage.Height / 2));
// Save to a BMP file
bmpImage.Save(dir + "output.monochrome.96dpi.bmp");
}Exceptions
Visina mora biti pozitivna.
Paleta mora biti određena za slike s 8 bitova po pikselu ili manje.
Properties
BitmapInfoHeader
Brzo pristupiti bitnim podacima o vašem bitmap sliku s ovom jednostavnom funkcijom.Idealan za razvijatelje koji moraju dobiti informacije o naslovima za svoje slike.
public BitmapInfoHeader BitmapInfoHeader { get; }Vrijednost nekretnina
Examples
Sljedeći primjer dobiva informacije iz naslova BMP-a i štampa ga na konzolu.
using (Aspose.Imaging.Image image = Aspose.Imaging.Image.Load(@"c:\temp\sample.bmp"))
{
Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = (Aspose.Imaging.FileFormats.Bmp.BmpImage)image;
Aspose.Imaging.FileFormats.Bmp.BitmapInfoHeader header = bmpImage.BitmapInfoHeader;
System.Console.WriteLine("The number of palette colors that are required for displaying the bitmap: {0}", header.BitmapColorsImportant);
System.Console.WriteLine("The number of palette colors used in the bitmap: {0}", header.BitmapColorsUsed);
System.Console.WriteLine("The bitmap compression: {0}", header.BitmapCompression);
System.Console.WriteLine("The bitmap height: {0}", header.BitmapHeight);
System.Console.WriteLine("The bitmap width: {0}", header.BitmapWidth);
System.Console.WriteLine("The bitmap raw data size in bytes: {0}", header.BitmapImageSize);
System.Console.WriteLine("The number of planes: {0}", header.BitmapPlanes);
System.Console.WriteLine("The horizontal resolution of the bitmap, in pixels-per-meter: {0}", header.BitmapXPelsPerMeter);
System.Console.WriteLine("The vertical resolution of the bitmap, in pixels-per-meter: {0}", header.BitmapYPelsPerMeter);
System.Console.WriteLine("The number of bits per pixel: {0}", header.BitsPerPixel);
System.Console.WriteLine("The extra bits masks: {0}", header.ExtraBitMasks);
System.Console.WriteLine("The header size in bytes: {0}", header.HeaderSize);
}
//The output may look like this:
//The number of palette colors that are required for displaying the bitmap: 0
//The number of palette colors used in the bitmap: 0
//The bitmap compression: 0
//The bitmap height: 375
//The bitmap width: 500
//The bitmap raw data size in bytes: 562500
//The number of planes: 1
//The horizontal resolution of the bitmap, in pixels-per-meter: 0
//The vertical resolution of the bitmap, in pixels-per-meter: 0
//The number of bits per pixel: 24
//The extra bits masks:
//The header size in bytes: 40BitsPerPixel
Pristup broju bitova po pikselu za sliku lako koristeći ovu svojstvo.Idealan za razvijatelje koji traže brze informacije o kvaliteti i dubini slike.
public override int BitsPerPixel { get; }Vrijednost nekretnina
Examples
Sljedeći primjer dobiva opće informacije o slici, uključujući format piksela, veličinu slike, rezoluciju, kompresije itd.
using (Aspose.Imaging.Image image = Aspose.Imaging.Image.Load(@"c:\temp\sample.bmp"))
{
Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = (Aspose.Imaging.FileFormats.Bmp.BmpImage)image;
System.Console.WriteLine("The pixel format: {0}", bmpImage.RawDataFormat);
System.Console.WriteLine("The raw line size in bytes: {0}", bmpImage.RawLineSize);
System.Console.WriteLine("The bitmap compression: {0}", bmpImage.Compression);
System.Console.WriteLine("The bitmap width: {0}", bmpImage.Width);
System.Console.WriteLine("The bitmap height: {0}", bmpImage.Height);
System.Console.WriteLine("The number of bits per pixel: {0}", bmpImage.BitsPerPixel);
double hres = bmpImage.HorizontalResolution;
double vres = bmpImage.VerticalResolution;
System.Console.WriteLine("The horizontal resolution, in pixels per inch: {0}", hres);
System.Console.WriteLine("The vertical resolution, in pixels per inch: {0}", vres);
if (hres != 96.0 || vres != 96.0)
{
// You may consider using the SetResolution method for updating both resolution values in single call.
System.Console.WriteLine("Set resolution values to 96 dpi");
bmpImage.SetResolution(96.0, 96.0);
System.Console.WriteLine("The horizontal resolution, in pixels per inch: {0}", bmpImage.HorizontalResolution);
System.Console.WriteLine("The vertical resolution, in pixels per inch: {0}", bmpImage.VerticalResolution);
}
//The output may look like this:
//The pixel format: Rgb24Bpp, used channels: 8,8,8
//The raw line size in bytes: 1500
//The bitmap compression: Rgb
//The bitmap width: 500
//The bitmap height: 375
//The number of bits per pixel: 24
//The horizontal resolution, in pixels per inch: 0
//The vertical resolution, in pixels per inch: 0
//Set resolution values to 96 dpi
//The horizontal resolution, in pixels per inch: 96.012
//The vertical resolution, in pixels per inch: 96.012
}Sljedeći primjer pokazuje kako kompresija bitmap utječe na veličinu slike izlaska.
Aspose.Imaging.FileFormats.Bmp.BitmapCompression[] compressions = new Aspose.Imaging.FileFormats.Bmp.BitmapCompression[]
{
Aspose.Imaging.FileFormats.Bmp.BitmapCompression.Rgb,
Aspose.Imaging.FileFormats.Bmp.BitmapCompression.Rle8,
};
Aspose.Imaging.Color[] paletterColors = new Aspose.Imaging.Color[]
{
Aspose.Imaging.Color.Red,
Aspose.Imaging.Color.Green,
};
// Create a monochrome palette which contains only red and green colors.
Aspose.Imaging.IColorPalette palette = new Aspose.Imaging.ColorPalette(paletterColors);
foreach (Aspose.Imaging.FileFormats.Bmp.BitmapCompression compression in compressions)
{
// Create a 8-bpp BMP image of 100 x 100 px.
using (Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = new Aspose.Imaging.FileFormats.Bmp.BmpImage(100, 100, 8, palette, compression, 0.0, 0.0))
{
Aspose.Imaging.Graphics gr = new Aspose.Imaging.Graphics(bmpImage);
// Fill the entire image in red.
Aspose.Imaging.Brushes.SolidBrush redBrush = new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Red);
gr.FillRectangle(redBrush, bmpImage.Bounds);
// Save the image to a stream to get the output image size.
using (System.IO.MemoryStream stream = new System.IO.MemoryStream())
{
bmpImage.Save(stream);
System.Console.WriteLine("---------------------------------------------");
System.Console.WriteLine("The compression={0}", bmpImage.Compression);
System.Console.WriteLine("The number of bits per pixel={0}", bmpImage.BitsPerPixel);
System.Console.WriteLine("The image dimensions={0} x {1}", bmpImage.Width, bmpImage.Height);
System.Console.WriteLine("The raw line size={0}", bmpImage.RawLineSize);
System.Console.WriteLine("The output size in bytes={0}", stream.Length);
}
}
}
// The output looks like this:
// ---------------------------------------------
// The compression = Rgb
// The number of bits per pixel = 8
// The image dimensions = 100 x 100
// The raw line size = 100
// The output size in bytes = 11078
// ---------------------------------------------
// The compression = Rle8
// The number of bits per pixel = 8
// The image dimensions = 100 x 100
// The raw line size = 100
// The output size in bytes = 856Compression
Obnavljajte tip kompresije koji se koristi za sliku bez napora s ovim svojstvom.Idealan za razvijatelje koji trebaju brzo pristupiti informacijama o kompresiji slike.
public BitmapCompression Compression { get; }Vrijednost nekretnina
Examples
Sljedeći primjer dobiva opće informacije o slici, uključujući format piksela, veličinu slike, rezoluciju, kompresije itd.
using (Aspose.Imaging.Image image = Aspose.Imaging.Image.Load(@"c:\temp\sample.bmp"))
{
Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = (Aspose.Imaging.FileFormats.Bmp.BmpImage)image;
System.Console.WriteLine("The pixel format: {0}", bmpImage.RawDataFormat);
System.Console.WriteLine("The raw line size in bytes: {0}", bmpImage.RawLineSize);
System.Console.WriteLine("The bitmap compression: {0}", bmpImage.Compression);
System.Console.WriteLine("The bitmap width: {0}", bmpImage.Width);
System.Console.WriteLine("The bitmap height: {0}", bmpImage.Height);
System.Console.WriteLine("The number of bits per pixel: {0}", bmpImage.BitsPerPixel);
double hres = bmpImage.HorizontalResolution;
double vres = bmpImage.VerticalResolution;
System.Console.WriteLine("The horizontal resolution, in pixels per inch: {0}", hres);
System.Console.WriteLine("The vertical resolution, in pixels per inch: {0}", vres);
if (hres != 96.0 || vres != 96.0)
{
// You may consider using the SetResolution method for updating both resolution values in single call.
System.Console.WriteLine("Set resolution values to 96 dpi");
bmpImage.SetResolution(96.0, 96.0);
System.Console.WriteLine("The horizontal resolution, in pixels per inch: {0}", bmpImage.HorizontalResolution);
System.Console.WriteLine("The vertical resolution, in pixels per inch: {0}", bmpImage.VerticalResolution);
}
//The output may look like this:
//The pixel format: Rgb24Bpp, used channels: 8,8,8
//The raw line size in bytes: 1500
//The bitmap compression: Rgb
//The bitmap width: 500
//The bitmap height: 375
//The number of bits per pixel: 24
//The horizontal resolution, in pixels per inch: 0
//The vertical resolution, in pixels per inch: 0
//Set resolution values to 96 dpi
//The horizontal resolution, in pixels per inch: 96.012
//The vertical resolution, in pixels per inch: 96.012
}Sljedeći primjer pokazuje kako kompresija bitmap utječe na veličinu slike izlaska.
Aspose.Imaging.FileFormats.Bmp.BitmapCompression[] compressions = new Aspose.Imaging.FileFormats.Bmp.BitmapCompression[]
{
Aspose.Imaging.FileFormats.Bmp.BitmapCompression.Rgb,
Aspose.Imaging.FileFormats.Bmp.BitmapCompression.Rle8,
};
Aspose.Imaging.Color[] paletterColors = new Aspose.Imaging.Color[]
{
Aspose.Imaging.Color.Red,
Aspose.Imaging.Color.Green,
};
// Create a monochrome palette which contains only red and green colors.
Aspose.Imaging.IColorPalette palette = new Aspose.Imaging.ColorPalette(paletterColors);
foreach (Aspose.Imaging.FileFormats.Bmp.BitmapCompression compression in compressions)
{
// Create a 8-bpp BMP image of 100 x 100 px.
using (Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = new Aspose.Imaging.FileFormats.Bmp.BmpImage(100, 100, 8, palette, compression, 0.0, 0.0))
{
Aspose.Imaging.Graphics gr = new Aspose.Imaging.Graphics(bmpImage);
// Fill the entire image in red.
Aspose.Imaging.Brushes.SolidBrush redBrush = new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Red);
gr.FillRectangle(redBrush, bmpImage.Bounds);
// Save the image to a stream to get the output image size.
using (System.IO.MemoryStream stream = new System.IO.MemoryStream())
{
bmpImage.Save(stream);
System.Console.WriteLine("---------------------------------------------");
System.Console.WriteLine("The compression={0}", bmpImage.Compression);
System.Console.WriteLine("The number of bits per pixel={0}", bmpImage.BitsPerPixel);
System.Console.WriteLine("The image dimensions={0} x {1}", bmpImage.Width, bmpImage.Height);
System.Console.WriteLine("The raw line size={0}", bmpImage.RawLineSize);
System.Console.WriteLine("The output size in bytes={0}", stream.Length);
}
}
}
// The output looks like this:
// ---------------------------------------------
// The compression = Rgb
// The number of bits per pixel = 8
// The image dimensions = 100 x 100
// The raw line size = 100
// The output size in bytes = 11078
// ---------------------------------------------
// The compression = Rle8
// The number of bits per pixel = 8
// The image dimensions = 100 x 100
// The raw line size = 100
// The output size in bytes = 856FileFormat
Jednostavno povući vrijednost formata datoteke s ovim korisnički prihvatljivom svojstvom.Idealan za razvijatelje koji traže brz pristup informacijama o formatu datoteke.
public override FileFormat FileFormat { get; }Vrijednost nekretnina
Examples
Sljedeći primjer pokazuje kako izvući informacije o formatu sirovih podataka i alfa kanala iz BMP slike.
// Create a 32-bpp BMP image of 100 x 100 px.
using (Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = new Aspose.Imaging.FileFormats.Bmp.BmpImage(100, 100, 32, null))
{
System.Console.WriteLine("FileFormat={0}, RawDataFormat={1}, HasAlpha={2}", bmpImage.FileFormat, bmpImage.RawDataFormat, bmpImage.HasAlpha);
};
// Create a 24-bpp BMP image of 100 x 100 px.
using (Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = new Aspose.Imaging.FileFormats.Bmp.BmpImage(100, 100, 24, null))
{
System.Console.WriteLine("FileFormat={0}, RawDataFormat={1}, HasAlpha={2}", bmpImage.FileFormat, bmpImage.RawDataFormat, bmpImage.HasAlpha);
};
// Generally, BMP doesn't support alpha channel so the output will look like this:
// FileFormat = Bmp, RawDataFormat = Rgb32Bpp, used channels: 8,8,8,8, HasAlpha = False
// FileFormat = Bmp, RawDataFormat = Rgb24Bpp, used channels: 8,8,8, HasAlpha = FalseHasAlpha
Dobiva vrijednost koja ukazuje na to ima li ta instanca alfa.
public override bool HasAlpha { get; }Vrijednost nekretnina
Height
Obnavljajte visinu slike bez napora s ovom svojstvom. idealno za razvijateljePotrebno je brzo pristupanje informacijama o dimenzijama slike.
public override int Height { get; }Vrijednost nekretnina
Examples
Sljedeći primjer dobiva opće informacije o slici, uključujući format piksela, veličinu slike, rezoluciju, kompresije itd.
using (Aspose.Imaging.Image image = Aspose.Imaging.Image.Load(@"c:\temp\sample.bmp"))
{
Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = (Aspose.Imaging.FileFormats.Bmp.BmpImage)image;
System.Console.WriteLine("The pixel format: {0}", bmpImage.RawDataFormat);
System.Console.WriteLine("The raw line size in bytes: {0}", bmpImage.RawLineSize);
System.Console.WriteLine("The bitmap compression: {0}", bmpImage.Compression);
System.Console.WriteLine("The bitmap width: {0}", bmpImage.Width);
System.Console.WriteLine("The bitmap height: {0}", bmpImage.Height);
System.Console.WriteLine("The number of bits per pixel: {0}", bmpImage.BitsPerPixel);
double hres = bmpImage.HorizontalResolution;
double vres = bmpImage.VerticalResolution;
System.Console.WriteLine("The horizontal resolution, in pixels per inch: {0}", hres);
System.Console.WriteLine("The vertical resolution, in pixels per inch: {0}", vres);
if (hres != 96.0 || vres != 96.0)
{
// You may consider using the SetResolution method for updating both resolution values in single call.
System.Console.WriteLine("Set resolution values to 96 dpi");
bmpImage.SetResolution(96.0, 96.0);
System.Console.WriteLine("The horizontal resolution, in pixels per inch: {0}", bmpImage.HorizontalResolution);
System.Console.WriteLine("The vertical resolution, in pixels per inch: {0}", bmpImage.VerticalResolution);
}
//The output may look like this:
//The pixel format: Rgb24Bpp, used channels: 8,8,8
//The raw line size in bytes: 1500
//The bitmap compression: Rgb
//The bitmap width: 500
//The bitmap height: 375
//The number of bits per pixel: 24
//The horizontal resolution, in pixels per inch: 0
//The vertical resolution, in pixels per inch: 0
//Set resolution values to 96 dpi
//The horizontal resolution, in pixels per inch: 96.012
//The vertical resolution, in pixels per inch: 96.012
}Sljedeći primjer pokazuje kako kompresija bitmap utječe na veličinu slike izlaska.
Aspose.Imaging.FileFormats.Bmp.BitmapCompression[] compressions = new Aspose.Imaging.FileFormats.Bmp.BitmapCompression[]
{
Aspose.Imaging.FileFormats.Bmp.BitmapCompression.Rgb,
Aspose.Imaging.FileFormats.Bmp.BitmapCompression.Rle8,
};
Aspose.Imaging.Color[] paletterColors = new Aspose.Imaging.Color[]
{
Aspose.Imaging.Color.Red,
Aspose.Imaging.Color.Green,
};
// Create a monochrome palette which contains only red and green colors.
Aspose.Imaging.IColorPalette palette = new Aspose.Imaging.ColorPalette(paletterColors);
foreach (Aspose.Imaging.FileFormats.Bmp.BitmapCompression compression in compressions)
{
// Create a 8-bpp BMP image of 100 x 100 px.
using (Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = new Aspose.Imaging.FileFormats.Bmp.BmpImage(100, 100, 8, palette, compression, 0.0, 0.0))
{
Aspose.Imaging.Graphics gr = new Aspose.Imaging.Graphics(bmpImage);
// Fill the entire image in red.
Aspose.Imaging.Brushes.SolidBrush redBrush = new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Red);
gr.FillRectangle(redBrush, bmpImage.Bounds);
// Save the image to a stream to get the output image size.
using (System.IO.MemoryStream stream = new System.IO.MemoryStream())
{
bmpImage.Save(stream);
System.Console.WriteLine("---------------------------------------------");
System.Console.WriteLine("The compression={0}", bmpImage.Compression);
System.Console.WriteLine("The number of bits per pixel={0}", bmpImage.BitsPerPixel);
System.Console.WriteLine("The image dimensions={0} x {1}", bmpImage.Width, bmpImage.Height);
System.Console.WriteLine("The raw line size={0}", bmpImage.RawLineSize);
System.Console.WriteLine("The output size in bytes={0}", stream.Length);
}
}
}
// The output looks like this:
// ---------------------------------------------
// The compression = Rgb
// The number of bits per pixel = 8
// The image dimensions = 100 x 100
// The raw line size = 100
// The output size in bytes = 11078
// ---------------------------------------------
// The compression = Rle8
// The number of bits per pixel = 8
// The image dimensions = 100 x 100
// The raw line size = 100
// The output size in bytes = 856HorizontalResolution
Ova imovina vam omogućuje da lako dobijete ili postavite horizontalnu rezoluciju,mjereni u pikselima po centimetaru, od Aspose.Imaging.RasterImage objekta.razvijatelji trebaju točnu kontrolu rezolucije slike za svoje aplikacije.
public override double HorizontalResolution { get; set; }Vrijednost nekretnina
Examples
Sljedeći primjer pokazuje kako postaviti horizontalnu/vertikalnu rezoluciju BMP slike.
string dir = "c:\\temp\\";
using (Aspose.Imaging.Image image = Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = (Aspose.Imaging.FileFormats.Bmp.BmpImage)image;
// Get horizontal and vertical resolution of the BmpImage
double horizontalResolution = bmpImage.HorizontalResolution;
double verticalResolution = bmpImage.VerticalResolution;
System.Console.WriteLine("The horizontal resolution, in pixels per inch: {0}", horizontalResolution);
System.Console.WriteLine("The vertical resolution, in pixels per inch: {0}", verticalResolution);
if (horizontalResolution != 96.0 || verticalResolution != 96.0)
{
// Use the SetResolution method for updating both resolution values in a single call.
System.Console.WriteLine("Set resolution values to 96 dpi");
bmpImage.SetResolution(96.0, 96.0);
System.Console.WriteLine("The horizontal resolution, in pixels per inch: {0}", bmpImage.HorizontalResolution);
System.Console.WriteLine("The vertical resolution, in pixels per inch: {0}", bmpImage.VerticalResolution);
}
// The output may look like this:
// The horizontal resolution, in pixels per inch: 0
// The vertical resolution, in pixels per inch: 0
// Set resolution values to 96 dpi
// The horizontal resolution, in pixels per inch: 96.012
// The vertical resolution, in pixels per inch: 96.012
}Sljedeći primjer dobiva opće informacije o slici, uključujući format piksela, veličinu slike, rezoluciju, kompresije itd.
using (Aspose.Imaging.Image image = Aspose.Imaging.Image.Load(@"c:\temp\sample.bmp"))
{
Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = (Aspose.Imaging.FileFormats.Bmp.BmpImage)image;
System.Console.WriteLine("The pixel format: {0}", bmpImage.RawDataFormat);
System.Console.WriteLine("The raw line size in bytes: {0}", bmpImage.RawLineSize);
System.Console.WriteLine("The bitmap compression: {0}", bmpImage.Compression);
System.Console.WriteLine("The bitmap width: {0}", bmpImage.Width);
System.Console.WriteLine("The bitmap height: {0}", bmpImage.Height);
System.Console.WriteLine("The number of bits per pixel: {0}", bmpImage.BitsPerPixel);
double hres = bmpImage.HorizontalResolution;
double vres = bmpImage.VerticalResolution;
System.Console.WriteLine("The horizontal resolution, in pixels per inch: {0}", hres);
System.Console.WriteLine("The vertical resolution, in pixels per inch: {0}", vres);
if (hres != 96.0 || vres != 96.0)
{
// You may consider using the SetResolution method for updating both resolution values in single call.
System.Console.WriteLine("Set resolution values to 96 dpi");
bmpImage.SetResolution(96.0, 96.0);
System.Console.WriteLine("The horizontal resolution, in pixels per inch: {0}", bmpImage.HorizontalResolution);
System.Console.WriteLine("The vertical resolution, in pixels per inch: {0}", bmpImage.VerticalResolution);
}
//The output may look like this:
//The pixel format: Rgb24Bpp, used channels: 8,8,8
//The raw line size in bytes: 1500
//The bitmap compression: Rgb
//The bitmap width: 500
//The bitmap height: 375
//The number of bits per pixel: 24
//The horizontal resolution, in pixels per inch: 0
//The vertical resolution, in pixels per inch: 0
//Set resolution values to 96 dpi
//The horizontal resolution, in pixels per inch: 96.012
//The vertical resolution, in pixels per inch: 96.012
}Remarks
Podrazumevano, ova vrijednost je uvijek 96 jer različite platforme ne mogu vratiti rezoluciju zaslona. možete razmotriti korištenje metode SetResolution za ažuriranje oba vrijednosti rezolucije u jednom pozivu.
RawDataFormat
Jednostavno dobijte format vaših sirovih podataka s ovom korisnički prihvatljivom funkcijom.Idealan za razvijatelje koji žele brzo pristupiti ključnim informacijama o njihovom formatu podataka.
public override PixelDataFormat RawDataFormat { get; }Vrijednost nekretnina
Examples
Sljedeći primjer pokazuje kako izvući informacije o formatu sirovih podataka i alfa kanala iz BMP slike.
// Create a 32-bpp BMP image of 100 x 100 px.
using (Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = new Aspose.Imaging.FileFormats.Bmp.BmpImage(100, 100, 32, null))
{
System.Console.WriteLine("FileFormat={0}, RawDataFormat={1}, HasAlpha={2}", bmpImage.FileFormat, bmpImage.RawDataFormat, bmpImage.HasAlpha);
};
// Create a 24-bpp BMP image of 100 x 100 px.
using (Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = new Aspose.Imaging.FileFormats.Bmp.BmpImage(100, 100, 24, null))
{
System.Console.WriteLine("FileFormat={0}, RawDataFormat={1}, HasAlpha={2}", bmpImage.FileFormat, bmpImage.RawDataFormat, bmpImage.HasAlpha);
};
// Generally, BMP doesn't support alpha channel so the output will look like this:
// FileFormat = Bmp, RawDataFormat = Rgb32Bpp, used channels: 8,8,8,8, HasAlpha = False
// FileFormat = Bmp, RawDataFormat = Rgb24Bpp, used channels: 8,8,8, HasAlpha = FalseSljedeći primjer dobiva opće informacije o slici, uključujući format piksela, veličinu slike, rezoluciju, kompresije itd.
using (Aspose.Imaging.Image image = Aspose.Imaging.Image.Load(@"c:\temp\sample.bmp"))
{
Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = (Aspose.Imaging.FileFormats.Bmp.BmpImage)image;
System.Console.WriteLine("The pixel format: {0}", bmpImage.RawDataFormat);
System.Console.WriteLine("The raw line size in bytes: {0}", bmpImage.RawLineSize);
System.Console.WriteLine("The bitmap compression: {0}", bmpImage.Compression);
System.Console.WriteLine("The bitmap width: {0}", bmpImage.Width);
System.Console.WriteLine("The bitmap height: {0}", bmpImage.Height);
System.Console.WriteLine("The number of bits per pixel: {0}", bmpImage.BitsPerPixel);
double hres = bmpImage.HorizontalResolution;
double vres = bmpImage.VerticalResolution;
System.Console.WriteLine("The horizontal resolution, in pixels per inch: {0}", hres);
System.Console.WriteLine("The vertical resolution, in pixels per inch: {0}", vres);
if (hres != 96.0 || vres != 96.0)
{
// You may consider using the SetResolution method for updating both resolution values in single call.
System.Console.WriteLine("Set resolution values to 96 dpi");
bmpImage.SetResolution(96.0, 96.0);
System.Console.WriteLine("The horizontal resolution, in pixels per inch: {0}", bmpImage.HorizontalResolution);
System.Console.WriteLine("The vertical resolution, in pixels per inch: {0}", bmpImage.VerticalResolution);
}
//The output may look like this:
//The pixel format: Rgb24Bpp, used channels: 8,8,8
//The raw line size in bytes: 1500
//The bitmap compression: Rgb
//The bitmap width: 500
//The bitmap height: 375
//The number of bits per pixel: 24
//The horizontal resolution, in pixels per inch: 0
//The vertical resolution, in pixels per inch: 0
//Set resolution values to 96 dpi
//The horizontal resolution, in pixels per inch: 96.012
//The vertical resolution, in pixels per inch: 96.012
}RawLineSize
Brzo pristupite veličini svake sirove linije u bajtima s ovim jednostavnim svojstvom.Idealno za razvijatelje koji trebaju učinkovito rukovati sirovim podacima slike.
public override int RawLineSize { get; }Vrijednost nekretnina
Examples
Sljedeći primjer dobiva opće informacije o slici, uključujući format piksela, veličinu slike, rezoluciju, kompresije itd.
using (Aspose.Imaging.Image image = Aspose.Imaging.Image.Load(@"c:\temp\sample.bmp"))
{
Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = (Aspose.Imaging.FileFormats.Bmp.BmpImage)image;
System.Console.WriteLine("The pixel format: {0}", bmpImage.RawDataFormat);
System.Console.WriteLine("The raw line size in bytes: {0}", bmpImage.RawLineSize);
System.Console.WriteLine("The bitmap compression: {0}", bmpImage.Compression);
System.Console.WriteLine("The bitmap width: {0}", bmpImage.Width);
System.Console.WriteLine("The bitmap height: {0}", bmpImage.Height);
System.Console.WriteLine("The number of bits per pixel: {0}", bmpImage.BitsPerPixel);
double hres = bmpImage.HorizontalResolution;
double vres = bmpImage.VerticalResolution;
System.Console.WriteLine("The horizontal resolution, in pixels per inch: {0}", hres);
System.Console.WriteLine("The vertical resolution, in pixels per inch: {0}", vres);
if (hres != 96.0 || vres != 96.0)
{
// You may consider using the SetResolution method for updating both resolution values in single call.
System.Console.WriteLine("Set resolution values to 96 dpi");
bmpImage.SetResolution(96.0, 96.0);
System.Console.WriteLine("The horizontal resolution, in pixels per inch: {0}", bmpImage.HorizontalResolution);
System.Console.WriteLine("The vertical resolution, in pixels per inch: {0}", bmpImage.VerticalResolution);
}
//The output may look like this:
//The pixel format: Rgb24Bpp, used channels: 8,8,8
//The raw line size in bytes: 1500
//The bitmap compression: Rgb
//The bitmap width: 500
//The bitmap height: 375
//The number of bits per pixel: 24
//The horizontal resolution, in pixels per inch: 0
//The vertical resolution, in pixels per inch: 0
//Set resolution values to 96 dpi
//The horizontal resolution, in pixels per inch: 96.012
//The vertical resolution, in pixels per inch: 96.012
}Sljedeći primjer pokazuje kako kompresija bitmap utječe na veličinu slike izlaska.
Aspose.Imaging.FileFormats.Bmp.BitmapCompression[] compressions = new Aspose.Imaging.FileFormats.Bmp.BitmapCompression[]
{
Aspose.Imaging.FileFormats.Bmp.BitmapCompression.Rgb,
Aspose.Imaging.FileFormats.Bmp.BitmapCompression.Rle8,
};
Aspose.Imaging.Color[] paletterColors = new Aspose.Imaging.Color[]
{
Aspose.Imaging.Color.Red,
Aspose.Imaging.Color.Green,
};
// Create a monochrome palette which contains only red and green colors.
Aspose.Imaging.IColorPalette palette = new Aspose.Imaging.ColorPalette(paletterColors);
foreach (Aspose.Imaging.FileFormats.Bmp.BitmapCompression compression in compressions)
{
// Create a 8-bpp BMP image of 100 x 100 px.
using (Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = new Aspose.Imaging.FileFormats.Bmp.BmpImage(100, 100, 8, palette, compression, 0.0, 0.0))
{
Aspose.Imaging.Graphics gr = new Aspose.Imaging.Graphics(bmpImage);
// Fill the entire image in red.
Aspose.Imaging.Brushes.SolidBrush redBrush = new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Red);
gr.FillRectangle(redBrush, bmpImage.Bounds);
// Save the image to a stream to get the output image size.
using (System.IO.MemoryStream stream = new System.IO.MemoryStream())
{
bmpImage.Save(stream);
System.Console.WriteLine("---------------------------------------------");
System.Console.WriteLine("The compression={0}", bmpImage.Compression);
System.Console.WriteLine("The number of bits per pixel={0}", bmpImage.BitsPerPixel);
System.Console.WriteLine("The image dimensions={0} x {1}", bmpImage.Width, bmpImage.Height);
System.Console.WriteLine("The raw line size={0}", bmpImage.RawLineSize);
System.Console.WriteLine("The output size in bytes={0}", stream.Length);
}
}
}
// The output looks like this:
// ---------------------------------------------
// The compression = Rgb
// The number of bits per pixel = 8
// The image dimensions = 100 x 100
// The raw line size = 100
// The output size in bytes = 11078
// ---------------------------------------------
// The compression = Rle8
// The number of bits per pixel = 8
// The image dimensions = 100 x 100
// The raw line size = 100
// The output size in bytes = 856VerticalResolution
Jednostavno povući ili postaviti vertikalnu rezoluciju, mjerenu u pikselima po centimetaru,od ovog Aspose.Imaging.RasterImage objekta s ovim vlasništvom. savršeno za razvijatelje koji zahtijevajuTočna kontrola rezolucije slike u njihovim aplikacijama.
public override double VerticalResolution { get; set; }Vrijednost nekretnina
Examples
Sljedeći primjer pokazuje kako postaviti horizontalnu/vertikalnu rezoluciju BMP slike.
string dir = "c:\\temp\\";
using (Aspose.Imaging.Image image = Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = (Aspose.Imaging.FileFormats.Bmp.BmpImage)image;
// Get horizontal and vertical resolution of the BmpImage
double horizontalResolution = bmpImage.HorizontalResolution;
double verticalResolution = bmpImage.VerticalResolution;
System.Console.WriteLine("The horizontal resolution, in pixels per inch: {0}", horizontalResolution);
System.Console.WriteLine("The vertical resolution, in pixels per inch: {0}", verticalResolution);
if (horizontalResolution != 96.0 || verticalResolution != 96.0)
{
// Use the SetResolution method for updating both resolution values in a single call.
System.Console.WriteLine("Set resolution values to 96 dpi");
bmpImage.SetResolution(96.0, 96.0);
System.Console.WriteLine("The horizontal resolution, in pixels per inch: {0}", bmpImage.HorizontalResolution);
System.Console.WriteLine("The vertical resolution, in pixels per inch: {0}", bmpImage.VerticalResolution);
}
// The output may look like this:
// The horizontal resolution, in pixels per inch: 0
// The vertical resolution, in pixels per inch: 0
// Set resolution values to 96 dpi
// The horizontal resolution, in pixels per inch: 96.012
// The vertical resolution, in pixels per inch: 96.012
}Sljedeći primjer dobiva opće informacije o slici, uključujući format piksela, veličinu slike, rezoluciju, kompresije itd.
using (Aspose.Imaging.Image image = Aspose.Imaging.Image.Load(@"c:\temp\sample.bmp"))
{
Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = (Aspose.Imaging.FileFormats.Bmp.BmpImage)image;
System.Console.WriteLine("The pixel format: {0}", bmpImage.RawDataFormat);
System.Console.WriteLine("The raw line size in bytes: {0}", bmpImage.RawLineSize);
System.Console.WriteLine("The bitmap compression: {0}", bmpImage.Compression);
System.Console.WriteLine("The bitmap width: {0}", bmpImage.Width);
System.Console.WriteLine("The bitmap height: {0}", bmpImage.Height);
System.Console.WriteLine("The number of bits per pixel: {0}", bmpImage.BitsPerPixel);
double hres = bmpImage.HorizontalResolution;
double vres = bmpImage.VerticalResolution;
System.Console.WriteLine("The horizontal resolution, in pixels per inch: {0}", hres);
System.Console.WriteLine("The vertical resolution, in pixels per inch: {0}", vres);
if (hres != 96.0 || vres != 96.0)
{
// You may consider using the SetResolution method for updating both resolution values in single call.
System.Console.WriteLine("Set resolution values to 96 dpi");
bmpImage.SetResolution(96.0, 96.0);
System.Console.WriteLine("The horizontal resolution, in pixels per inch: {0}", bmpImage.HorizontalResolution);
System.Console.WriteLine("The vertical resolution, in pixels per inch: {0}", bmpImage.VerticalResolution);
}
//The output may look like this:
//The pixel format: Rgb24Bpp, used channels: 8,8,8
//The raw line size in bytes: 1500
//The bitmap compression: Rgb
//The bitmap width: 500
//The bitmap height: 375
//The number of bits per pixel: 24
//The horizontal resolution, in pixels per inch: 0
//The vertical resolution, in pixels per inch: 0
//Set resolution values to 96 dpi
//The horizontal resolution, in pixels per inch: 96.012
//The vertical resolution, in pixels per inch: 96.012
}Remarks
Podrazumevano, ova vrijednost je uvijek 96 jer različite platforme ne mogu vratiti rezoluciju zaslona. možete razmotriti korištenje metode SetResolution za ažuriranje oba vrijednosti rezolucije u jednom pozivu.
Width
Pristup širini slike lako s ovom svojstvom. idealno za razvijateljetražiti brze informacije o dimenzijama slike.
public override int Width { get; }Vrijednost nekretnina
Examples
Sljedeći primjer dobiva opće informacije o slici, uključujući format piksela, veličinu slike, rezoluciju, kompresije itd.
using (Aspose.Imaging.Image image = Aspose.Imaging.Image.Load(@"c:\temp\sample.bmp"))
{
Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = (Aspose.Imaging.FileFormats.Bmp.BmpImage)image;
System.Console.WriteLine("The pixel format: {0}", bmpImage.RawDataFormat);
System.Console.WriteLine("The raw line size in bytes: {0}", bmpImage.RawLineSize);
System.Console.WriteLine("The bitmap compression: {0}", bmpImage.Compression);
System.Console.WriteLine("The bitmap width: {0}", bmpImage.Width);
System.Console.WriteLine("The bitmap height: {0}", bmpImage.Height);
System.Console.WriteLine("The number of bits per pixel: {0}", bmpImage.BitsPerPixel);
double hres = bmpImage.HorizontalResolution;
double vres = bmpImage.VerticalResolution;
System.Console.WriteLine("The horizontal resolution, in pixels per inch: {0}", hres);
System.Console.WriteLine("The vertical resolution, in pixels per inch: {0}", vres);
if (hres != 96.0 || vres != 96.0)
{
// You may consider using the SetResolution method for updating both resolution values in single call.
System.Console.WriteLine("Set resolution values to 96 dpi");
bmpImage.SetResolution(96.0, 96.0);
System.Console.WriteLine("The horizontal resolution, in pixels per inch: {0}", bmpImage.HorizontalResolution);
System.Console.WriteLine("The vertical resolution, in pixels per inch: {0}", bmpImage.VerticalResolution);
}
//The output may look like this:
//The pixel format: Rgb24Bpp, used channels: 8,8,8
//The raw line size in bytes: 1500
//The bitmap compression: Rgb
//The bitmap width: 500
//The bitmap height: 375
//The number of bits per pixel: 24
//The horizontal resolution, in pixels per inch: 0
//The vertical resolution, in pixels per inch: 0
//Set resolution values to 96 dpi
//The horizontal resolution, in pixels per inch: 96.012
//The vertical resolution, in pixels per inch: 96.012
}Sljedeći primjer pokazuje kako kompresija bitmap utječe na veličinu slike izlaska.
Aspose.Imaging.FileFormats.Bmp.BitmapCompression[] compressions = new Aspose.Imaging.FileFormats.Bmp.BitmapCompression[]
{
Aspose.Imaging.FileFormats.Bmp.BitmapCompression.Rgb,
Aspose.Imaging.FileFormats.Bmp.BitmapCompression.Rle8,
};
Aspose.Imaging.Color[] paletterColors = new Aspose.Imaging.Color[]
{
Aspose.Imaging.Color.Red,
Aspose.Imaging.Color.Green,
};
// Create a monochrome palette which contains only red and green colors.
Aspose.Imaging.IColorPalette palette = new Aspose.Imaging.ColorPalette(paletterColors);
foreach (Aspose.Imaging.FileFormats.Bmp.BitmapCompression compression in compressions)
{
// Create a 8-bpp BMP image of 100 x 100 px.
using (Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = new Aspose.Imaging.FileFormats.Bmp.BmpImage(100, 100, 8, palette, compression, 0.0, 0.0))
{
Aspose.Imaging.Graphics gr = new Aspose.Imaging.Graphics(bmpImage);
// Fill the entire image in red.
Aspose.Imaging.Brushes.SolidBrush redBrush = new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Red);
gr.FillRectangle(redBrush, bmpImage.Bounds);
// Save the image to a stream to get the output image size.
using (System.IO.MemoryStream stream = new System.IO.MemoryStream())
{
bmpImage.Save(stream);
System.Console.WriteLine("---------------------------------------------");
System.Console.WriteLine("The compression={0}", bmpImage.Compression);
System.Console.WriteLine("The number of bits per pixel={0}", bmpImage.BitsPerPixel);
System.Console.WriteLine("The image dimensions={0} x {1}", bmpImage.Width, bmpImage.Height);
System.Console.WriteLine("The raw line size={0}", bmpImage.RawLineSize);
System.Console.WriteLine("The output size in bytes={0}", stream.Length);
}
}
}
// The output looks like this:
// ---------------------------------------------
// The compression = Rgb
// The number of bits per pixel = 8
// The image dimensions = 100 x 100
// The raw line size = 100
// The output size in bytes = 11078
// ---------------------------------------------
// The compression = Rle8
// The number of bits per pixel = 8
// The image dimensions = 100 x 100
// The raw line size = 100
// The output size in bytes = 856Methods
GetDefaultOptions(Objekt[])
Odstranite privremene opcije bez napora pomoću ove jednostavne metode.Idealan za razvijatelje koji traže brz pristup privremenim postavkama ili konfiguracijama slike.
public override ImageOptionsBase GetDefaultOptions(object[] args)Parameters
args object
[]
i argumentima .
Returns
Podrazumevane opcije
OnCached()
Naziva se kada se podaci sakrivaju i svi povezani resursi mogu biti de-određeni.
protected override void OnCached()OnPaletteChanging(Sljedeći članakSljedeći članakSljedeći članakIcolorPalette)
Naziva se kada se paleta mijenja.
protected override void OnPaletteChanging(IColorPalette oldPalette, IColorPalette newPalette)Parameters
oldPalette IColorPalette
Stara je paleta.
newPalette IColorPalette
Nova je paleta.
SaveData(Stream)
Sačuvajte podatke.
protected override void SaveData(Stream stream)Parameters
stream Stream
Proljev za spašavanje podataka na.
SetResolution(Dvostruko, dvostruko)
Prilagodite rezoluciju Aspose.Imaging.RasterImage bez napora s ovimKorisni način. savršen za razvijatelje koji traže točnu kontrolu nadRezolucija slike u njihovim aplikacijama.
public override void SetResolution(double dpiX, double dpiY)Parameters
dpiX double
Horizontalna rezolucija, u točkama po centimetaru, Aspose.Imaging.RasterImage.
dpiY double
Vertikalna rezolucija, u točkama po inču, Aspose.Imaging.RasterImage.
Examples
Sljedeći primjer pokazuje kako postaviti horizontalnu/vertikalnu rezoluciju BMP slike.
string dir = "c:\\temp\\";
using (Aspose.Imaging.Image image = Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = (Aspose.Imaging.FileFormats.Bmp.BmpImage)image;
// Get horizontal and vertical resolution of the BmpImage
double horizontalResolution = bmpImage.HorizontalResolution;
double verticalResolution = bmpImage.VerticalResolution;
System.Console.WriteLine("The horizontal resolution, in pixels per inch: {0}", horizontalResolution);
System.Console.WriteLine("The vertical resolution, in pixels per inch: {0}", verticalResolution);
if (horizontalResolution != 96.0 || verticalResolution != 96.0)
{
// Use the SetResolution method for updating both resolution values in a single call.
System.Console.WriteLine("Set resolution values to 96 dpi");
bmpImage.SetResolution(96.0, 96.0);
System.Console.WriteLine("The horizontal resolution, in pixels per inch: {0}", bmpImage.HorizontalResolution);
System.Console.WriteLine("The vertical resolution, in pixels per inch: {0}", bmpImage.VerticalResolution);
}
// The output may look like this:
// The horizontal resolution, in pixels per inch: 0
// The vertical resolution, in pixels per inch: 0
// Set resolution values to 96 dpi
// The horizontal resolution, in pixels per inch: 96.012
// The vertical resolution, in pixels per inch: 96.012
}Sljedeći primjer dobiva opće informacije o slici, uključujući format piksela, veličinu slike, rezoluciju, kompresije itd.
using (Aspose.Imaging.Image image = Aspose.Imaging.Image.Load(@"c:\temp\sample.bmp"))
{
Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = (Aspose.Imaging.FileFormats.Bmp.BmpImage)image;
System.Console.WriteLine("The pixel format: {0}", bmpImage.RawDataFormat);
System.Console.WriteLine("The raw line size in bytes: {0}", bmpImage.RawLineSize);
System.Console.WriteLine("The bitmap compression: {0}", bmpImage.Compression);
System.Console.WriteLine("The bitmap width: {0}", bmpImage.Width);
System.Console.WriteLine("The bitmap height: {0}", bmpImage.Height);
System.Console.WriteLine("The number of bits per pixel: {0}", bmpImage.BitsPerPixel);
double hres = bmpImage.HorizontalResolution;
double vres = bmpImage.VerticalResolution;
System.Console.WriteLine("The horizontal resolution, in pixels per inch: {0}", hres);
System.Console.WriteLine("The vertical resolution, in pixels per inch: {0}", vres);
if (hres != 96.0 || vres != 96.0)
{
// You may consider using the SetResolution method for updating both resolution values in single call.
System.Console.WriteLine("Set resolution values to 96 dpi");
bmpImage.SetResolution(96.0, 96.0);
System.Console.WriteLine("The horizontal resolution, in pixels per inch: {0}", bmpImage.HorizontalResolution);
System.Console.WriteLine("The vertical resolution, in pixels per inch: {0}", bmpImage.VerticalResolution);
}
//The output may look like this:
//The pixel format: Rgb24Bpp, used channels: 8,8,8
//The raw line size in bytes: 1500
//The bitmap compression: Rgb
//The bitmap width: 500
//The bitmap height: 375
//The number of bits per pixel: 24
//The horizontal resolution, in pixels per inch: 0
//The vertical resolution, in pixels per inch: 0
//Set resolution values to 96 dpi
//The horizontal resolution, in pixels per inch: 96.012
//The vertical resolution, in pixels per inch: 96.012
}ToBitmap()
Jednostavno pretvorite raster sliku u bitmap pomoću ove jednostavne metode.Idealan za razvijatelje koji moraju bezuvjetno prebaciti između različitih formata slike.
public override Bitmap ToBitmap()Returns
Bitmap je
Examples
Sljedeći primjer pretvara BMP sliku u bitmap GDI.
using (Aspose.Imaging.Image image = Aspose.Imaging.Image.Load(@"c:\temp\sample.bmp"))
{
Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = (Aspose.Imaging.FileFormats.Bmp.BmpImage)image;
System.Drawing.Bitmap bitmap = bmpImage.ToBitmap();
// Process the GDI bitmap.
}UpdateDimensions(u, u)
ažurira dimenzije slike.
protected override void UpdateDimensions(int newWidth, int newHeight)Parameters
newWidth int
Nova širina slike.
newHeight int
Visina nove slike.
