Class SvgGraphics2D
Class SvgGraphics2D
nazivni prostor: Aspose.Imaging.FileFormats.Svg.Graphics Sastav: Aspose.Imaging.dll (25.4.0)
Pružuje crtanje zapovijedi za sastav Svg slika.
public class SvgGraphics2DInheritance
naslijeđeni članovi
object.GetType() , object.MemberwiseClone() , object.ToString() , object.Equals(object?) , object.Equals(object?, object?) , object.ReferenceEquals(object?, object?) , object.GetHashCode()
Constructors
Grafički 2D(int, int, int)
Inicijalizira novu primjenu Aspose.Imaging.FileFormats.Svg.Graphics.D. razreda.
public SvgGraphics2D(int width, int height, int dpi)Parameters
width int
Širina izlaska Svg slika.
height int
Širina izlaska Svg slika.
dpi int
Rezolucija uređaja, na primjer, 96 točaka po inču.
Examples
Ovaj primjer pokazuje kako stvoriti SVG sliku određene veličine i rasterizirati ga na PNG.
string dir = "c:\\temp\\";
int imageWidth = 100;
int imageHeight = 100;
int dpi = 96;
// Create an SVG image of 100x100 px.
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
Aspose.Imaging.Pen pen = new Aspose.Imaging.Pen(Aspose.Imaging.Color.Yellow, 10);
Aspose.Imaging.Brushes.SolidBrush brush = new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Red);
// Fill the entire image in red.
// Draw a yellow rectangle of 10px wide along the image boundaries.
graphics.FillRectangle(pen, brush, 0, 0, imageWidth, imageHeight);
// Get the final Svg image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}Ovaj primjer pokazuje kako stvoriti SVG sliku određene veličine i crti različite oblike na njemu pomoću SvgGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}Grafički 2D(SvgImage)
Inicijalizira novu primjenu Aspose.Imaging.FileFormats.Svg.Graphics.D. razreda.
public SvgGraphics2D(SvgImage image)Parameters
image SvgImage
Slike za obavljanje operacija crtanja na.
Methods
DrawArc(Sljedeći članakPen, rektangle, float, float)
Drži luk koji predstavlja dio elipa koji je određen strukturom pravog ugla.
public void DrawArc(Pen pen, Rectangle rect, float startAngle, float arcAngle)Parameters
pen Pen
Pijesak za uklanjanje izlaska figure.
rect Rectangle
Granične granice elipsima.
startAngle float
Ugledi u stupanjima mjereni su satom od x-axisa do početne točke arka.
arcAngle float
Ugledi u stupanjima mjereni su na satnoj razini od početkaParametara Angle do završetka točke arka.
Examples
Ovaj primjer pokazuje kako stvoriti SVG sliku određene veličine i crti različite oblike na njemu pomoću SvgGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}DrawCubicBezier(Slijedeći članakPen, PointF, PointF)
Slijedeći Članak Cube bezier.
public void DrawCubicBezier(Pen pen, PointF pt1, PointF pt2, PointF pt3, PointF pt4)Parameters
pen Pen
Pen koji određuje boju, širinu i stil figure.
pt1 PointF
Početak je točka kurve.
pt2 PointF
Prva kontrolna točka za kurvicu.
pt3 PointF
Druga kontrolna točka za kurvicu.
pt4 PointF
Završna točka kurve.
Examples
Ovaj primjer pokazuje kako stvoriti SVG sliku određene veličine i crti različite oblike na njemu pomoću SvgGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}DrawImage(Sjeverna Koreja, točka)
Napravite određenu sliku na određenom mjestu.
public void DrawImage(RasterImage image, Point origin)Parameters
image RasterImage
Izgrađena je slika.
origin Point
Lokacija snimljenog slika.
DrawImage(RasterImage, točka, veličina)
Napravite određenu sliku određene veličine na određenom mjestu.
public void DrawImage(RasterImage image, Point origin, Size size)Parameters
image RasterImage
Izgrađena je slika.
origin Point
Lokacija snimljenog slika.
size Size
Željena veličina snimljenog slika.
Examples
Ovaj primjer pokazuje kako stvoriti SVG sliku određene veličine i crti različite oblike na njemu pomoću SvgGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}DrawImage(Rektangle, rasterimage i rektangli)
Napravite određeni dio određene slike na određenom mjestu i s određivanom veličinom.
public void DrawImage(Rectangle srcRect, Rectangle destRect, RasterImage image)Parameters
srcRect Rectangle
Porcija slike predmeta za crtanje.
destRect Rectangle
Lokacija i veličina izrezane slike. slika je skalirana kako bi se prilagodila pravcu.
image RasterImage
Slike koje treba izrezati.
DrawLine(Svijet, int, int, int, int)
Napravite liniju.
public void DrawLine(Pen pen, int x1, int y1, int x2, int y2)Parameters
pen Pen
Pen koji određuje boju, širinu i stil figure.
x1 int
Koordinacija x prvog dijela.
y1 int
Koordinacija prvog točka.
x2 int
Koordinacija x u drugoj točki.
y2 int
Koordinacija u drugoj točki.
Examples
Ovaj primjer pokazuje kako stvoriti SVG sliku određene veličine i crti različite oblike na njemu pomoću SvgGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}DrawPath(Sljedeći Članak GraphicsPath)
Napravite put.
public void DrawPath(Pen pen, GraphicsPath path)Parameters
pen Pen
Pijesak za uklanjanje izlaska figure.
path GraphicsPath
Cesta za natjecanje.
Examples
Ovaj primjer pokazuje kako stvoriti SVG sliku određene veličine i crti različite oblike na njemu pomoću SvgGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}DrawRectangle(Svijet, int, int, int, int)
Uklonite pravokut.
public void DrawRectangle(Pen pen, int x, int y, int width, int height)Parameters
pen Pen
Pijesak za uklanjanje izlaska figure.
x int
X-koordinacija gornjeg lijevog ugla pravog ugla za crtanje.
y int
Y-koordinacija gornjeg lijevog ugla pravog ugla za trčanje.
width int
Širina pravokugla za crtanje.
height int
Visina pravokugla da se izvuče.
Examples
Ovaj primjer pokazuje kako stvoriti SVG sliku određene veličine i crti različite oblike na njemu pomoću SvgGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}DrawString(font, string, točka, boja)
Preuzmite tekstnu liniju.
public void DrawString(Font font, string text, Point origin, Color textColor)Parameters
font Font
Knjiga je upotrijebljena za izradu teksta.
text string
Unicode tekst string.
origin Point
Gornji lijevi kut teksta radi.
textColor Color
Boja teksta je.
Examples
Ovaj primjer pokazuje kako stvoriti SVG sliku određene veličine i crti različite oblike na njemu pomoću SvgGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}EndRecording()
Pronađite konačnu Svg sliku koja uključuje sve zapovijedi za crtanje izvršene putem Aspose.Imaging.FileFormats.Svg.Graphics.
public SvgImage EndRecording()Returns
Posljednja slika Svg.
Examples
Ovaj primjer pokazuje kako stvoriti SVG sliku određene veličine i crti različite oblike na njemu pomoću SvgGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}FillArc(Pen, Brush, Rectangle, Float, float)
Popunjuje luk koji predstavlja dio elipa koji je određen strukturom pravog ugla.
public void FillArc(Pen pen, Brush brush, Rectangle rect, float startAngle, float arcAngle)Parameters
pen Pen
Pijesak za uklanjanje izlaska figure.
brush Brush
Prtljažnik za punjenje unutrašnjosti figure.
rect Rectangle
Granične granice elipsima.
startAngle float
Ugledi u stupanjima mjereni su satom od x-axisa do početne točke arka.
arcAngle float
Ugledi u stupanjima mjereni su na satnoj razini od početkaParametara Angle do završetka točke arka.
Examples
Ovaj primjer pokazuje kako stvoriti SVG sliku određene veličine i crti različite oblike na njemu pomoću SvgGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}FillPath(Slijedeći Članak Pen, Brush, GraphicsPath)
Puni se put.
public void FillPath(Pen pen, Brush brush, GraphicsPath path)Parameters
pen Pen
Pijesak za uklanjanje izlaska figure.
brush Brush
Prtljažnik za punjenje unutrašnjosti figure.
path GraphicsPath
Cesta za natjecanje.
Examples
Ovaj primjer pokazuje kako stvoriti SVG sliku određene veličine i crti različite oblike na njemu pomoću SvgGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}FillRectangle(Slijedeći Članak Pen, Brush, Int, int)
Puni se pravokugli.
public void FillRectangle(Pen pen, Brush brush, int x, int y, int width, int height)Parameters
pen Pen
Pijesak za uklanjanje izlaska figure.
brush Brush
Prtljažnik za punjenje unutrašnjosti figure.
x int
X-koordinacija gornjeg lijevog ugla pravog ugla za crtanje.
y int
Y-koordinacija gornjeg lijevog ugla pravog ugla za trčanje.
width int
Širina pravokugla za crtanje.
height int
Visina pravokugla da se izvuče.
Examples
Ovaj primjer pokazuje kako stvoriti SVG sliku određene veličine i crti različite oblike na njemu pomoću SvgGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}
