Class MetafileRecorderGraphics2D
Class MetafileRecorderGraphics2D
A név: Aspose.Imaging.FileFormats.Emf.Graphics Összefoglaló: Aspose.Imaging.dll (25.4.0)
A metafizikai felvételi grafika
public abstract class MetafileRecorderGraphics2DInheritance
object ← MetafileRecorderGraphics2D
Derived
EmfRecorderGraphics2D , WmfRecorderGraphics2D
Örökletes tagok
object.GetType() , object.MemberwiseClone() , object.ToString() , object.Equals(object?) , object.Equals(object?, object?) , object.ReferenceEquals(object?, object?) , object.GetHashCode()
Properties
BackgroundColor
Megkapja vagy állítja a háttér színét.
public Color BackgroundColor { get; set; }ingatlan értéke
BackgroundMode
Megkapja vagy beállítja a háttér módot.
protected int BackgroundMode { get; set; }ingatlan értéke
Clip
Hozzon vagy állítson be olyan Régiót, amely korlátozza a grafika rajzterületét
public Region Clip { get; set; }ingatlan értéke
ClipBounds
Megkapja a klip határait.
public RectangleF ClipBounds { get; }ingatlan értéke
Methods
Clear()
Megtisztítja a grafikus objektum állapotát
public void Clear()DrawArc(Pén, rektangul, float, float)
Vág egy arc, amely egy ellipszis egy rektanguláris szerkezet által meghatározott részét képviseli.
public void DrawArc(Pen pen, Rectangle rect, float startAngle, float arcAngle)Parameters
pen Pen
Pen, amely meghatározza a színt, szélességet és stílust a szám.
rect Rectangle
Az ellipszis határai.
startAngle float
A fokos szögeket az x-axis-tól az arc kiindulási pontjáig mérik.
arcAngle float
Szög a fokok mérése órásan a kezdetiAngle paraméter a végpont az ív.
Examples
Ez a példa azt mutatja, hogyan kell létrehozni egy WMF képet és rajzolni néhány geometriai alakok segítségével WmfRecorderGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
// This is the default screen resolution.
int dpi = 96;
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight);
// Create a WMF image.
Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D(frame, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Wmf.WmfImage wmfImage = graphics.EndRecording())
{
wmfImage.Save(dir + "test.output.wmf");
}Ez a példa azt mutatja, hogyan kell létrehozni egy EMF képet, és rajzolni néhány geometriai alakja annak használatával EmfRecorderGraphics2D.
string dir = "c:\\temp\\";
// The image size in pixels
int deviceWidth = 600;
int deviceHeight = 400;
// The image size in millimiters
int deviceWidthMm = (int)(deviceWidth / 100f);
int deviceHeightMm = (int)(deviceHeight / 100f);
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight);
// Create a EMF image.
Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D(
frame,
new Aspose.Imaging.Size(deviceWidth, deviceHeight),
new Aspose.Imaging.Size(deviceWidthMm, deviceHeightMm));
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, deviceWidth, deviceHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, deviceWidth, deviceHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, deviceHeight, deviceWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Emf.EmfImage emfImage = graphics.EndRecording())
{
emfImage.Save(dir + "test.output.emf");
}DrawCubicBezier(Pont, pont, pont és pont)
Vegyük a kubikus bezieret.
public void DrawCubicBezier(Pen pen, Point pt1, Point pt2, Point pt3, Point pt4)Parameters
pen Pen
Pen, amely meghatározza a színt, szélességet és stílust a szám.
pt1 Point
A kurva kiindulópontja.
pt2 Point
Az első vezérlőpont a curve számára.
pt3 Point
A második vezérlőpont a curve számára.
pt4 Point
A kurva végpontja.
Examples
Ez a példa azt mutatja, hogyan kell létrehozni egy WMF képet és rajzolni néhány geometriai alakok segítségével WmfRecorderGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
// This is the default screen resolution.
int dpi = 96;
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight);
// Create a WMF image.
Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D(frame, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Wmf.WmfImage wmfImage = graphics.EndRecording())
{
wmfImage.Save(dir + "test.output.wmf");
}Ez a példa azt mutatja, hogyan kell létrehozni egy EMF képet, és rajzolni néhány geometriai alakja annak használatával EmfRecorderGraphics2D.
string dir = "c:\\temp\\";
// The image size in pixels
int deviceWidth = 600;
int deviceHeight = 400;
// The image size in millimiters
int deviceWidthMm = (int)(deviceWidth / 100f);
int deviceHeightMm = (int)(deviceHeight / 100f);
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight);
// Create a EMF image.
Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D(
frame,
new Aspose.Imaging.Size(deviceWidth, deviceHeight),
new Aspose.Imaging.Size(deviceWidthMm, deviceHeightMm));
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, deviceWidth, deviceHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, deviceWidth, deviceHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, deviceHeight, deviceWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Emf.EmfImage emfImage = graphics.EndRecording())
{
emfImage.Save(dir + "test.output.emf");
}DrawEllipse(Pén, Rectangle)
Kattintson az ellipszára.
public void DrawEllipse(Pen pen, Rectangle rect)Parameters
pen Pen
Pen, amely meghatározza a színt, szélességet és stílust a szám.
rect Rectangle
Az ellipszis határai.
DrawImage(Rákóczi, pont)
A megadott képet az eredeti fizikai mérete alapján a meghatározott helyen rögzíti.
public void DrawImage(RasterImage image, Point location)Parameters
image RasterImage
A képet rajzolni kell.
location Point
A festett kép felső bal sarkának elhelyezkedése.
DrawImage(RasterImage, Rectangle, Térképek)
A megadott kép meghatározott részét a kijelölt helyen és az adott méretben húzza.
public void DrawImage(RasterImage image, Rectangle destRect, Rectangle srcRect, GraphicsUnit srcUnit)Parameters
image RasterImage
A képet rajzolni kell.
destRect Rectangle
Rectangle szerkezet, amely meghatározza a helyét és méretét a rajzolt kép. A kép skálázott, hogy illeszkedjen a jobboldali.
srcRect Rectangle
Rectangle szerkezet, amely meghatározza a kép objektumának a rajzolásához szükséges részét.
srcUnit GraphicsUnit
A srcRect paraméter által használt mérési egységek.
Examples
Ez a példa azt mutatja, hogyan kell létrehozni egy WMF képet és rajzolni néhány geometriai alakok segítségével WmfRecorderGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
// This is the default screen resolution.
int dpi = 96;
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight);
// Create a WMF image.
Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D(frame, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Wmf.WmfImage wmfImage = graphics.EndRecording())
{
wmfImage.Save(dir + "test.output.wmf");
}Ez a példa azt mutatja, hogyan kell létrehozni egy EMF képet, és rajzolni néhány geometriai alakja annak használatával EmfRecorderGraphics2D.
string dir = "c:\\temp\\";
// The image size in pixels
int deviceWidth = 600;
int deviceHeight = 400;
// The image size in millimiters
int deviceWidthMm = (int)(deviceWidth / 100f);
int deviceHeightMm = (int)(deviceHeight / 100f);
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight);
// Create a EMF image.
Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D(
frame,
new Aspose.Imaging.Size(deviceWidth, deviceHeight),
new Aspose.Imaging.Size(deviceWidthMm, deviceHeightMm));
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, deviceWidth, deviceHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, deviceWidth, deviceHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, deviceHeight, deviceWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Emf.EmfImage emfImage = graphics.EndRecording())
{
emfImage.Save(dir + "test.output.emf");
}Exceptions
srcUnit;Támogatja csak a Pixel egységet
DrawImage(Byte[], Rectangle, GraphicsUnit)
Vegyük fel a képet.
public void DrawImage(byte[] imageBytes, Rectangle destRect, GraphicsUnit srcUnit)Parameters
imageBytes byte
[]
A kép bajtjai.
destRect Rectangle
Az igazságszolgáltatás.
srcUnit GraphicsUnit
A forrás egység.
DrawImage(Stream, Rectangle és Graphics)
Vegyük fel a képet.
public void DrawImage(Stream stream, Rectangle destRect, GraphicsUnit srcUnit)Parameters
stream Stream
Az áramlás.
destRect Rectangle
Az igazságszolgáltatás.
srcUnit GraphicsUnit
A forrás egység.
DrawLine(Az int, int, int, int)
Húzza meg a vonalat.
public void DrawLine(Pen pen, int x1, int y1, int x2, int y2)Parameters
pen Pen
Pen, amely meghatározza a színt, szélességet és stílust a szám.
x1 int
Az első pont x-koordinátusa.
y1 int
Az első pont koordinátája.
x2 int
A második pont X-koordinátusa.
y2 int
A második pont j-koordinátusa
Examples
Ez a példa azt mutatja, hogyan kell létrehozni egy WMF képet és rajzolni néhány geometriai alakok segítségével WmfRecorderGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
// This is the default screen resolution.
int dpi = 96;
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight);
// Create a WMF image.
Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D(frame, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Wmf.WmfImage wmfImage = graphics.EndRecording())
{
wmfImage.Save(dir + "test.output.wmf");
}Ez a példa azt mutatja, hogyan kell létrehozni egy EMF képet, és rajzolni néhány geometriai alakja annak használatával EmfRecorderGraphics2D.
string dir = "c:\\temp\\";
// The image size in pixels
int deviceWidth = 600;
int deviceHeight = 400;
// The image size in millimiters
int deviceWidthMm = (int)(deviceWidth / 100f);
int deviceHeightMm = (int)(deviceHeight / 100f);
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight);
// Create a EMF image.
Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D(
frame,
new Aspose.Imaging.Size(deviceWidth, deviceHeight),
new Aspose.Imaging.Size(deviceWidthMm, deviceHeightMm));
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, deviceWidth, deviceHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, deviceWidth, deviceHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, deviceHeight, deviceWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Emf.EmfImage emfImage = graphics.EndRecording())
{
emfImage.Save(dir + "test.output.emf");
}DrawLine(Pén, pont és pont)
Húzza meg a vonalat.
public void DrawLine(Pen pen, Point pt1, Point pt2)Parameters
pen Pen
Pen, amely meghatározza a színt, szélességet és stílust a szám.
pt1 Point
Az első pont.
pt2 Point
A második pont.
DrawPath(Pén, grafikaPath)
Vegyük az utat.
public void DrawPath(Pen pen, GraphicsPath path)Parameters
pen Pen
Pen, amely meghatározza a színt, szélességet és stílust a szám.
path GraphicsPath
Az út a rajzoláshoz.
Examples
Ez a példa azt mutatja, hogyan kell létrehozni egy WMF képet és rajzolni néhány geometriai alakok segítségével WmfRecorderGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
// This is the default screen resolution.
int dpi = 96;
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight);
// Create a WMF image.
Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D(frame, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Wmf.WmfImage wmfImage = graphics.EndRecording())
{
wmfImage.Save(dir + "test.output.wmf");
}Ez a példa azt mutatja, hogyan kell létrehozni egy EMF képet, és rajzolni néhány geometriai alakja annak használatával EmfRecorderGraphics2D.
string dir = "c:\\temp\\";
// The image size in pixels
int deviceWidth = 600;
int deviceHeight = 400;
// The image size in millimiters
int deviceWidthMm = (int)(deviceWidth / 100f);
int deviceHeightMm = (int)(deviceHeight / 100f);
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight);
// Create a EMF image.
Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D(
frame,
new Aspose.Imaging.Size(deviceWidth, deviceHeight),
new Aspose.Imaging.Size(deviceWidthMm, deviceHeightMm));
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, deviceWidth, deviceHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, deviceWidth, deviceHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, deviceHeight, deviceWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Emf.EmfImage emfImage = graphics.EndRecording())
{
emfImage.Save(dir + "test.output.emf");
}DrawPie(Pén, rektangul, float, float)
Kattintson a lábra.
public void DrawPie(Pen pen, Rectangle rect, float startAngle, float sweepAngle)Parameters
pen Pen
Pen, amely meghatározza a színt, szélességet és stílust a szám.
rect Rectangle
Az ellipszis határai.
startAngle float
A fokos szögeket az x-axis-tól az arc kiindulási pontjáig mérik.
sweepAngle float
Szög a fokok mérése órásan a kezdetiAngle paraméter a végpont az ív.
DrawPolyCubicBezier(Pénz, pont[])
Vegyük fel a polikubikus bezieret.
public void DrawPolyCubicBezier(Pen pen, Point[] points)Parameters
pen Pen
Pen, amely meghatározza a színt, szélességet és stílust a szám.
points Point
[]
A pontok .
Exceptions
A sorban lévő pontok száma 3 plusz 1 többszörösnek kell lennie, például 4, 7 vagy 10.
DrawPolygon(Pénz, pont[])
Töltsd le a poligont!
public void DrawPolygon(Pen pen, Point[] points)Parameters
pen Pen
Pen, amely meghatározza a színt, szélességet és stílust a szám.
points Point
[]
A pontok .
DrawPolyline(Pénz, pont[])
Töltsd le a polilinát!
public void DrawPolyline(Pen pen, Point[] points)Parameters
pen Pen
Pen, amely meghatározza a színt, szélességet és stílust a szám.
points Point
[]
A pontok .
DrawRectangle(Az int, int, int, int)
Vágja a rektangulát.
public void DrawRectangle(Pen pen, int x, int y, int width, int height)Parameters
pen Pen
Pen, amely meghatározza a színt, szélességet és stílust a szám.
x int
Az x-koordinátus a felső bal sarok a rektangul, hogy húzza.
y int
Az y-koordinátus a jobb felső sarok a rektangul, hogy húzza.
width int
A rektangul szélessége a rajzoláshoz.
height int
A rektangul magassága a rajzoláshoz.
Examples
Ez a példa azt mutatja, hogyan kell létrehozni egy WMF képet és rajzolni néhány geometriai alakok segítségével WmfRecorderGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
// This is the default screen resolution.
int dpi = 96;
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight);
// Create a WMF image.
Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D(frame, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Wmf.WmfImage wmfImage = graphics.EndRecording())
{
wmfImage.Save(dir + "test.output.wmf");
}Ez a példa azt mutatja, hogyan kell létrehozni egy EMF képet, és rajzolni néhány geometriai alakja annak használatával EmfRecorderGraphics2D.
string dir = "c:\\temp\\";
// The image size in pixels
int deviceWidth = 600;
int deviceHeight = 400;
// The image size in millimiters
int deviceWidthMm = (int)(deviceWidth / 100f);
int deviceHeightMm = (int)(deviceHeight / 100f);
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight);
// Create a EMF image.
Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D(
frame,
new Aspose.Imaging.Size(deviceWidth, deviceHeight),
new Aspose.Imaging.Size(deviceWidthMm, deviceHeightMm));
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, deviceWidth, deviceHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, deviceWidth, deviceHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, deviceHeight, deviceWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Emf.EmfImage emfImage = graphics.EndRecording())
{
emfImage.Save(dir + "test.output.emf");
}DrawRectangle(Pén, Rectangle)
Vágja a rektangulát.
public void DrawRectangle(Pen pen, Rectangle rectangle)Parameters
pen Pen
Pen, amely meghatározza a színt, szélességet és stílust a szám.
rectangle Rectangle
A rektangul a rajzoláshoz.
DrawString(szalag, Font, Szín, int és int)
Rögzítse a szalagot.
public void DrawString(string @string, Font font, Color color, int x, int y)Parameters
string string
Ez a string.
font Font
Font, amely meghatározza a szalag szövegformátumát.
color Color
A szöveg színe.
x int
Az x-koordinátus a vonzott szöveg felső bal sarkában.
y int
A szöveg felső bal sarkának y-koordinátusa.
Examples
Ez a példa azt mutatja, hogyan kell feltölteni egy EMF képet egy fájlból, és rajzolni egy szöveges szalagot rajta.
string dir = "c:\\temp\\";
using (Aspose.Imaging.FileFormats.Emf.EmfImage emfImage = (Aspose.Imaging.FileFormats.Emf.EmfImage)Aspose.Imaging.Image.Load(dir + "test.emf"))
{
Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D graphics =
Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D.FromEmfImage(emfImage);
// First, get the image size
int width = emfImage.Width;
int height = emfImage.Height;
// Second, calculate a transformation to put a text string along the main diagonal of the image -
// from the upper-left to the bootom-right corner.
float emFontSize = 96f;
float d = (float)System.Math.Sqrt(width * width + height * height);
float scaleFactor = d / (emFontSize * 5f);
float tan = ((float)height) / width;
double radians = System.Math.Atan(tan);
double degrees = (180 * radians) / System.Math.PI;
Aspose.Imaging.Matrix transform = new Aspose.Imaging.Matrix();
transform.Rotate((float)degrees);
transform.Scale(scaleFactor, scaleFactor);
// Then, set the transform.
graphics.SetTransform(transform);
// Finally, put a watermark (text string of pink color) along the main diagonal.
graphics.DrawString("WATERMARK", new Aspose.Imaging.Font("Courier New", emFontSize), Aspose.Imaging.Color.LightPink, 0, 0/*, (float)degrees*/);
// Save the image with watermark to another EMF file.
using (Aspose.Imaging.FileFormats.Emf.EmfImage scaledEmfImage = graphics.EndRecording())
{
scaledEmfImage.Save(dir + "test.scaled.emf");
}
}Ez a példa azt mutatja, hogyan kell létrehozni egy WMF képet és rajzolni néhány geometriai alakok segítségével WmfRecorderGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
// This is the default screen resolution.
int dpi = 96;
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight);
// Create a WMF image.
Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D(frame, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Wmf.WmfImage wmfImage = graphics.EndRecording())
{
wmfImage.Save(dir + "test.output.wmf");
}Ez a példa azt mutatja, hogyan kell létrehozni egy EMF képet, és rajzolni néhány geometriai alakja annak használatával EmfRecorderGraphics2D.
string dir = "c:\\temp\\";
// The image size in pixels
int deviceWidth = 600;
int deviceHeight = 400;
// The image size in millimiters
int deviceWidthMm = (int)(deviceWidth / 100f);
int deviceHeightMm = (int)(deviceHeight / 100f);
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight);
// Create a EMF image.
Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D(
frame,
new Aspose.Imaging.Size(deviceWidth, deviceHeight),
new Aspose.Imaging.Size(deviceWidthMm, deviceHeightMm));
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, deviceWidth, deviceHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, deviceWidth, deviceHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, deviceHeight, deviceWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Emf.EmfImage emfImage = graphics.EndRecording())
{
emfImage.Save(dir + "test.output.emf");
}DrawString(szalag, Font, Szín, Int, int, Float)
Rögzítse a szalagot.
public void DrawString(string @string, Font font, Color color, int x, int y, float angle)Parameters
string string
Ez a string.
font Font
Font, amely meghatározza a szalag szövegformátumát.
color Color
A szöveg színe.
x int
Az x-koordinátus a vonzott szöveg felső bal sarkában.
y int
A szöveg felső bal sarkának y-koordinátusa.
angle float
A szög fokban, a vektor és a készülék x-axis között.A kimeneti vektor párhuzamosan van egy szövegsorozat alapvonalával.
ExcludeClip(Rectangle)
Aktualizálja a grafika klip régióját, hogy kizárja a Rectangle szerkezet által meghatározott területet.
public void ExcludeClip(Rectangle rect)Parameters
rect Rectangle
Rectangle szerkezet, amely meghatározza a rektangelt, hogy kizárja a klip régióban.
ExcludeClip(Region)
Aktualizálja a grafika klip régióját, hogy kizárja a régió által meghatározott területet.
public void ExcludeClip(Region region)Parameters
region Region
Olyan régió, amely meghatározza a régiót, hogy kizárja a klip régióból.
FillEllipse(Bruszka, Rectangle)
Töltse ki az ellipszát.
public void FillEllipse(Brush brush, Rectangle rect)Parameters
brush Brush
Brush, amely meghatározza a kitöltés jellemzőit.
rect Rectangle
Az ellipszis határai.
FillPath(Pén, szőnyeg, grafikaPath)
Töltse ki az utat.
public void FillPath(Pen pen, Brush brush, GraphicsPath path)Parameters
pen Pen
Pen, amely meghatározza a színt, szélességet és stílust a szám.
brush Brush
Brush, amely meghatározza a kitöltés jellemzőit.
path GraphicsPath
Az út a kitöltéshez.
Examples
Ez a példa azt mutatja, hogyan kell létrehozni egy WMF képet és rajzolni néhány geometriai alakok segítségével WmfRecorderGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
// This is the default screen resolution.
int dpi = 96;
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight);
// Create a WMF image.
Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D(frame, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Wmf.WmfImage wmfImage = graphics.EndRecording())
{
wmfImage.Save(dir + "test.output.wmf");
}Ez a példa azt mutatja, hogyan kell létrehozni egy EMF képet, és rajzolni néhány geometriai alakja annak használatával EmfRecorderGraphics2D.
string dir = "c:\\temp\\";
// The image size in pixels
int deviceWidth = 600;
int deviceHeight = 400;
// The image size in millimiters
int deviceWidthMm = (int)(deviceWidth / 100f);
int deviceHeightMm = (int)(deviceHeight / 100f);
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight);
// Create a EMF image.
Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D(
frame,
new Aspose.Imaging.Size(deviceWidth, deviceHeight),
new Aspose.Imaging.Size(deviceWidthMm, deviceHeightMm));
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, deviceWidth, deviceHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, deviceWidth, deviceHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, deviceHeight, deviceWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Emf.EmfImage emfImage = graphics.EndRecording())
{
emfImage.Save(dir + "test.output.emf");
}FillPie(Fúvóka, Fúvóka, Fúvóka)
Töltse ki a lábát.
public void FillPie(Brush brush, Rectangle rect, float startAngle, float sweepAngle)Parameters
brush Brush
Brush, amely meghatározza a kitöltés jellemzőit.
rect Rectangle
Az ellipszis határai.
startAngle float
A fokos szögeket az x-axis-tól az arc kiindulási pontjáig mérik.
sweepAngle float
Szög a fokok mérése órásan a kezdetiAngle paraméter a végpont az ív.
Examples
Ez a példa azt mutatja, hogyan kell létrehozni egy WMF képet és rajzolni néhány geometriai alakok segítségével WmfRecorderGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
// This is the default screen resolution.
int dpi = 96;
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight);
// Create a WMF image.
Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D(frame, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Wmf.WmfImage wmfImage = graphics.EndRecording())
{
wmfImage.Save(dir + "test.output.wmf");
}Ez a példa azt mutatja, hogyan kell létrehozni egy EMF képet, és rajzolni néhány geometriai alakja annak használatával EmfRecorderGraphics2D.
string dir = "c:\\temp\\";
// The image size in pixels
int deviceWidth = 600;
int deviceHeight = 400;
// The image size in millimiters
int deviceWidthMm = (int)(deviceWidth / 100f);
int deviceHeightMm = (int)(deviceHeight / 100f);
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight);
// Create a EMF image.
Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D(
frame,
new Aspose.Imaging.Size(deviceWidth, deviceHeight),
new Aspose.Imaging.Size(deviceWidthMm, deviceHeightMm));
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, deviceWidth, deviceHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, deviceWidth, deviceHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, deviceHeight, deviceWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Emf.EmfImage emfImage = graphics.EndRecording())
{
emfImage.Save(dir + "test.output.emf");
}FillPolygon(Bruszka, pont[])
Töltse ki a poligont.
public void FillPolygon(Brush brush, Point[] points)Parameters
brush Brush
Brush, amely meghatározza a kitöltés jellemzőit.
points Point
[]
A pontok .
FillPolygon(Bruszka, pont[], A FillMode)
Töltse ki a poligont.
public void FillPolygon(Brush brush, Point[] points, FillMode fillMode)Parameters
brush Brush
Brush, amely meghatározza a kitöltés jellemzőit.
points Point
[]
A pontok .
fillMode FillMode
Töltse ki a módot.
FillRectangle(Bruszka, Rectangle)
Töltse ki a rektangulát.
public void FillRectangle(Brush brush, Rectangle rectangle)Parameters
brush Brush
Brush, amely meghatározza a kitöltés jellemzőit.
rectangle Rectangle
A rektangul kitöltéséhez.
Examples
Ez a példa azt mutatja, hogyan kell létrehozni egy WMF képet és rajzolni néhány geometriai alakok segítségével WmfRecorderGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
// This is the default screen resolution.
int dpi = 96;
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight);
// Create a WMF image.
Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Wmf.Graphics.WmfRecorderGraphics2D(frame, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, imageWidth, imageHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Wmf.WmfImage wmfImage = graphics.EndRecording())
{
wmfImage.Save(dir + "test.output.wmf");
}Ez a példa azt mutatja, hogyan kell létrehozni egy EMF képet, és rajzolni néhány geometriai alakja annak használatával EmfRecorderGraphics2D.
string dir = "c:\\temp\\";
// The image size in pixels
int deviceWidth = 600;
int deviceHeight = 400;
// The image size in millimiters
int deviceWidthMm = (int)(deviceWidth / 100f);
int deviceHeightMm = (int)(deviceHeight / 100f);
Aspose.Imaging.Rectangle frame = new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight);
// Create a EMF image.
Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D graphics =
new Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D(
frame,
new Aspose.Imaging.Size(deviceWidth, deviceHeight),
new Aspose.Imaging.Size(deviceWidthMm, deviceHeightMm));
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, deviceWidth, deviceHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), new Aspose.Imaging.Rectangle(10, 10, 580, 380));
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, deviceWidth, deviceHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, deviceHeight, deviceWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillPie(new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(200, 133),
new Aspose.Imaging.Point(400, 166),
new Aspose.Imaging.Point(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw,
new Aspose.Imaging.Rectangle(400, 200, 100, 50),
new Aspose.Imaging.Rectangle(0, 0, deviceWidth, deviceHeight),
Aspose.Imaging.GraphicsUnit.Pixel);
}
// Draw a text string
graphics.DrawString("Hello World!", new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), Aspose.Imaging.Color.DarkRed, 200, 300);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// In order to rasterize SVG we need to specify rasterization options.
Aspose.Imaging.ImageOptions.SvgRasterizationOptions rasterizationOptions = new Aspose.Imaging.ImageOptions.SvgRasterizationOptions();
Aspose.Imaging.ImageOptions.PngOptions saveOptions = new Aspose.Imaging.ImageOptions.PngOptions();
saveOptions.VectorRasterizationOptions = rasterizationOptions;
// Get the final WMF image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Emf.EmfImage emfImage = graphics.EndRecording())
{
emfImage.Save(dir + "test.output.emf");
}GetTransform()
Átalakítja a világot.
public Matrix GetTransform()Returns
A Matrix átalakítása.
IntersectClip(RectangleF)
A grafika klip régióját frissíti a jelenlegi klipp régió és a megadott Rectangle szerkezet átjárójára.
public void IntersectClip(RectangleF rect)Parameters
rect RectangleF
Rectangle szerkezet, hogy összekapcsolja a jelenlegi klip régió.
IntersectClip(Region)
Aktualizálja a grafika klip régióját a jelenlegi klip-régió és a meghatározott régió átjárójára.
public void IntersectClip(Region region)Parameters
region Region
A régió összekapcsolódik a jelenlegi régióval.
MultiplyTransform(Matrix)
Többszörösíti a világ átalakulása ezt a grafika és meghatározza a Matrix.
public void MultiplyTransform(Matrix matrix)Parameters
matrix Matrix
A matrix, amely a világ átalakítását szaporítja.
MultiplyTransform(Matrix és MatrixOrder)
Többszörösíti a világ átalakulása ez a grafika és meghatározza a Matrix a meghatározott sorrendben.
public void MultiplyTransform(Matrix matrix, MatrixOrder order)Parameters
matrix Matrix
A matrix, amely a világ átalakítását szaporítja.
order MatrixOrder
A szaporodás rendje.
ResetClip()
Visszaállítja a klipet.
public void ResetClip()RotateTransform(Flotta)
Alkalmazza a meghatározott forgalmat a grafika átalakulásának matrikájára.
public void RotateTransform(float angle)Parameters
angle float
A fordulat szögét fokban.
RotateTransform(Térkép, PointF, MatrixOrder)
Alkalmazza a meghatározott forgalmat a grafika átalakítási matrikájára az adott sorrendben.
public void RotateTransform(float angle, PointF center, MatrixOrder order)Parameters
angle float
A fordulat szögét fokban.
center PointF
A rotációs központ.
order MatrixOrder
Meghatározza, hogy a forgatás ragaszkodik-e vagy a matrix átalakításához ragyog.
ScaleTransform(hajó, hajó)
Alkalmazza a meghatározott skálázási műveletet a grafika átalakítási matrikájára azáltal, hogy az objektum transformációs matricájához kötötte.
public void ScaleTransform(float sx, float sy)Parameters
sx float
Skálázási tényező az x irányban.
sy float
Skálázási tényező az Y irányban.
ScaleTransform(hajó, hajó, MatrixOrder)
Alkalmazza a meghatározott skálázási műveletet a grafika átalakítási matrikájára az adott sorrendben.
public void ScaleTransform(float sx, float sy, MatrixOrder order)Parameters
sx float
Skálázási tényező az x irányban.
sy float
Skálázási tényező az Y irányban.
order MatrixOrder
Határozza meg, hogy a skálázási művelet a transzformációs matrixhoz van-e elzárva vagy ragasztva.
SetTransform(Matrix)
Állítsa be a transzformációt.
public void SetTransform(Matrix transform)Parameters
transform Matrix
Az új Matrix átalakítása.
Examples
Ez a példa azt mutatja, hogyan kell feltölteni egy EMF képet egy fájlból, és rajzolni egy szöveges szalagot rajta.
string dir = "c:\\temp\\";
using (Aspose.Imaging.FileFormats.Emf.EmfImage emfImage = (Aspose.Imaging.FileFormats.Emf.EmfImage)Aspose.Imaging.Image.Load(dir + "test.emf"))
{
Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D graphics =
Aspose.Imaging.FileFormats.Emf.Graphics.EmfRecorderGraphics2D.FromEmfImage(emfImage);
// First, get the image size
int width = emfImage.Width;
int height = emfImage.Height;
// Second, calculate a transformation to put a text string along the main diagonal of the image -
// from the upper-left to the bootom-right corner.
float emFontSize = 96f;
float d = (float)System.Math.Sqrt(width * width + height * height);
float scaleFactor = d / (emFontSize * 5f);
float tan = ((float)height) / width;
double radians = System.Math.Atan(tan);
double degrees = (180 * radians) / System.Math.PI;
Aspose.Imaging.Matrix transform = new Aspose.Imaging.Matrix();
transform.Rotate((float)degrees);
transform.Scale(scaleFactor, scaleFactor);
// Then, set the transform.
graphics.SetTransform(transform);
// Finally, put a watermark (text string of pink color) along the main diagonal.
graphics.DrawString("WATERMARK", new Aspose.Imaging.Font("Courier New", emFontSize), Aspose.Imaging.Color.LightPink, 0, 0/*, (float)degrees*/);
// Save the image with watermark to another EMF file.
using (Aspose.Imaging.FileFormats.Emf.EmfImage scaledEmfImage = graphics.EndRecording())
{
scaledEmfImage.Save(dir + "test.scaled.emf");
}
}TranslateTransform(hajó, hajó)
Megváltoztatja a koordinációs rendszer eredetét azáltal, hogy a meghatározott fordítást a grafika átalakulásának matrikájára helyezi el.
public void TranslateTransform(float x, float y)Parameters
x float
A fordítás x koordinátája.
y float
A fordítás j-koordinátusa
TranslateTransform(hajó, hajó, MatrixOrder)
Megváltoztatja a koordinaterendszer eredetét azáltal, hogy a meghatározott fordítást a grafika átalakítási matrikájára alkalmazza az adott sorrendben.
public void TranslateTransform(float x, float y, MatrixOrder order)Parameters
x float
A fordítás x koordinátája.
y float
A fordítás j-koordinátusa
order MatrixOrder
Határozza meg, hogy a fordítás előfordul-e vagy az átalakítási matrixhoz kapcsolódik.
