Class SvgGraphics2D
Class SvgGraphics2D
A név: Aspose.Imaging.FileFormats.Svg.Graphics Összefoglaló: Aspose.Imaging.dll (25.4.0)
Javasolja, hogy a kommandákat Svg képet készítsen.
public class SvgGraphics2DInheritance
Örökletes tagok
object.GetType() , object.MemberwiseClone() , object.ToString() , object.Equals(object?) , object.Equals(object?, object?) , object.ReferenceEquals(object?, object?) , object.GetHashCode()
Constructors
Gyártó2D(Az int, int, int)
Kezdeményez egy új példányt a Aspose.Imaging.FileFormats.Svg.Graphics.D. osztály.
public SvgGraphics2D(int width, int height, int dpi)Parameters
width int
A kibocsátás szélessége Svg kép.
height int
A kibocsátás szélessége Svg kép.
dpi int
A készülék felbontása, például 96 pont per hüvelyk.
Examples
Ez a példa azt mutatja, hogyan kell létrehozni a megadott méretű SVG képet, és a PNG-re rázza.
string dir = "c:\\temp\\";
int imageWidth = 100;
int imageHeight = 100;
int dpi = 96;
// Create an SVG image of 100x100 px.
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
Aspose.Imaging.Pen pen = new Aspose.Imaging.Pen(Aspose.Imaging.Color.Yellow, 10);
Aspose.Imaging.Brushes.SolidBrush brush = new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Red);
// Fill the entire image in red.
// Draw a yellow rectangle of 10px wide along the image boundaries.
graphics.FillRectangle(pen, brush, 0, 0, imageWidth, imageHeight);
// Get the final Svg image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}Ez a példa azt mutatja, hogyan kell létrehozni a megadott méretű SVG képet, és a SvgGraphics2D segítségével különböző formákat rajzol.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}Gyártó2D(SvgImage)
Kezdeményez egy új példányt a Aspose.Imaging.FileFormats.Svg.Graphics.D. osztály.
public SvgGraphics2D(SvgImage image)Parameters
image SvgImage
A kép a rajz műveletek elvégzésére.
Methods
DrawArc(Pén, rektangul, float, float)
Vág egy arc, amely egy ellipszis egy rektanguláris szerkezet által meghatározott részét képviseli.
public void DrawArc(Pen pen, Rectangle rect, float startAngle, float arcAngle)Parameters
pen Pen
A toll a szám kiindulópontját húzza.
rect Rectangle
Az ellipszis határai.
startAngle float
A fokos szög az x-axis-tól az arc kiindulási pontjáig órásan mérhető.
arcAngle float
A fokos szöget az indulásról az Angol paraméterről az arc pontjára mérik.
Examples
Ez a példa azt mutatja, hogyan kell létrehozni a megadott méretű SVG képet, és a SvgGraphics2D segítségével különböző formákat rajzol.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}DrawCubicBezier(Pén, PointF, PointF és PointF)
Vegyük a kubikus bezieret.
public void DrawCubicBezier(Pen pen, PointF pt1, PointF pt2, PointF pt3, PointF pt4)Parameters
pen Pen
A toll, amely meghatározza a színt, szélességet és stílust a szám.
pt1 PointF
A kurva kiindulópontja.
pt2 PointF
Az első vezérlőpont a curve számára.
pt3 PointF
A második vezérlőpont a curve számára.
pt4 PointF
A kurva végpontja.
Examples
Ez a példa azt mutatja, hogyan kell létrehozni a megadott méretű SVG képet, és a SvgGraphics2D segítségével különböző formákat rajzol.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}DrawImage(Rákóczi, pont)
Írja be a kijelölt képet az adott helyen.
public void DrawImage(RasterImage image, Point origin)Parameters
image RasterImage
Az ábrázolt kép.
origin Point
A festett kép helye.
DrawImage(Térkép, pont, méret)
Írja be a kijelölt méretnek a megadott helyre történő megjelenítését.
public void DrawImage(RasterImage image, Point origin, Size size)Parameters
image RasterImage
Az ábrázolt kép.
origin Point
A festett kép helye.
size Size
A vágott kép kívánt méretét.
Examples
Ez a példa azt mutatja, hogyan kell létrehozni a megadott méretű SVG képet, és a SvgGraphics2D segítségével különböző formákat rajzol.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}DrawImage(A Rectangle, a RasterImage)
A megadott kép meghatározott részét a kijelölt helyen és az adott méretben húzza.
public void DrawImage(Rectangle srcRect, Rectangle destRect, RasterImage image)Parameters
srcRect Rectangle
Az objektum részét a kép rajzolja.
destRect Rectangle
A kép elhelyezkedése és mérete.A kép a rektangulhoz illeszkedik.
image RasterImage
A képet rajzolni kell.
DrawLine(Az int, int, int, int)
Húzza meg a vonalat.
public void DrawLine(Pen pen, int x1, int y1, int x2, int y2)Parameters
pen Pen
A toll, amely meghatározza a színt, szélességet és stílust a szám.
x1 int
Az első pont x-koordinátusa.
y1 int
Az első pont koordinátája.
x2 int
A második pont X-koordinátusa.
y2 int
A második pont j-koordinátusa
Examples
Ez a példa azt mutatja, hogyan kell létrehozni a megadott méretű SVG képet, és a SvgGraphics2D segítségével különböző formákat rajzol.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}DrawPath(Pén, grafikaPath)
Vegyük az utat.
public void DrawPath(Pen pen, GraphicsPath path)Parameters
pen Pen
A toll a szám kiindulópontját húzza.
path GraphicsPath
Az út a rajzoláshoz.
Examples
Ez a példa azt mutatja, hogyan kell létrehozni a megadott méretű SVG képet, és a SvgGraphics2D segítségével különböző formákat rajzol.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}DrawRectangle(Az int, int, int, int)
Vágja a rektangulát.
public void DrawRectangle(Pen pen, int x, int y, int width, int height)Parameters
pen Pen
A toll a szám kiindulópontját húzza.
x int
Az x-koordinátus a felső bal sarok a rektangul, hogy húzza.
y int
Az y-koordinátus a jobb felső sarok a rektangul, hogy húzza.
width int
A rektangul szélessége a rajzoláshoz.
height int
A rektangul magassága a rajzoláshoz.
Examples
Ez a példa azt mutatja, hogyan kell létrehozni a megadott méretű SVG képet, és a SvgGraphics2D segítségével különböző formákat rajzol.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}DrawString(Font, szalag, pont, szín)
Írja be a szöveges szalagot.
public void DrawString(Font font, string text, Point origin, Color textColor)Parameters
font Font
A betűtípus a szöveg megjelenítésére használt.
text string
Az Unicode szövegszalag.
origin Point
A szöveg bal felső sarkában fut.
textColor Color
A szöveg színe.
Examples
Ez a példa azt mutatja, hogyan kell létrehozni a megadott méretű SVG képet, és a SvgGraphics2D segítségével különböző formákat rajzol.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}EndRecording()
Megkapja a végső Svg képet, amely magában foglalja az összes rajzparancsot a Aspose.Imaging.FileFormats.Svg.Graphics.D objektumon keresztül.
public SvgImage EndRecording()Returns
Az utolsó Svg kép.
Examples
Ez a példa azt mutatja, hogyan kell létrehozni a megadott méretű SVG képet, és a SvgGraphics2D segítségével különböző formákat rajzol.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}FillArc(Pén, Brush, Rectangle, Float, float)
Töltse ki az arcot, amely egy ellipsz részét képviseli, amelyet egy rektanguláris szerkezet határoz meg.
public void FillArc(Pen pen, Brush brush, Rectangle rect, float startAngle, float arcAngle)Parameters
pen Pen
A toll a szám kiindulópontját húzza.
brush Brush
A fúvóka kitölti a szám belső részét.
rect Rectangle
Az ellipszis határai.
startAngle float
A fokos szög az x-axis-tól az arc kiindulási pontjáig órásan mérhető.
arcAngle float
A fokos szöget az indulásról az Angol paraméterről az arc pontjára mérik.
Examples
Ez a példa azt mutatja, hogyan kell létrehozni a megadott méretű SVG képet, és a SvgGraphics2D segítségével különböző formákat rajzol.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}FillPath(Pén, szőnyeg, grafikaPath)
Töltse ki az utat.
public void FillPath(Pen pen, Brush brush, GraphicsPath path)Parameters
pen Pen
A toll a szám kiindulópontját húzza.
brush Brush
A fúvóka kitölti a szám belső részét.
path GraphicsPath
Az út a rajzoláshoz.
Examples
Ez a példa azt mutatja, hogyan kell létrehozni a megadott méretű SVG képet, és a SvgGraphics2D segítségével különböző formákat rajzol.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}FillRectangle(Pén, szőnyeg int, int és int)
Töltse ki a rektangulát.
public void FillRectangle(Pen pen, Brush brush, int x, int y, int width, int height)Parameters
pen Pen
A toll a szám kiindulópontját húzza.
brush Brush
A fúvóka kitölti a szám belső részét.
x int
Az x-koordinátus a felső bal sarok a rektangul, hogy húzza.
y int
Az y-koordinátus a jobb felső sarok a rektangul, hogy húzza.
width int
A rektangul szélessége a rajzoláshoz.
height int
A rektangul magassága a rajzoláshoz.
Examples
Ez a példa azt mutatja, hogyan kell létrehozni a megadott méretű SVG képet, és a SvgGraphics2D segítségével különböző formákat rajzol.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}
