Class BmpImage
Nama dari : Aspose.Imaging.FileFormats.Bmp Pengumpulan: Aspose.Imaging.dll (25.4.0)
Anda dapat dengan mudah menangani Bitmap (BMP) dan Device Independent Bitmap(DIB) file, memfasilitasi manipulasi dan pemrosesan raster yang efisienMelakukan berbagai operasi pada gambar, API ini menyempurnakanaliran kerja, menawarkan pengembang set alat yang dapat diandalkan untuk bekerja dengan BMP danFormat DIB dalam aplikasi perangkat lunak mereka.
[JsonObject(MemberSerialization.OptIn)]
public sealed class BmpImage : RasterCachedImage, IDisposable, IObjectWithBounds, IRasterImageArgb32PixelLoader, IRasterImageRawDataLoader, IHasXmpData, IHasMetadataInheritance
object ← DisposableObject ← DataStreamSupporter ← Image ← RasterImage ← RasterCachedImage ← BmpImage
Implements
IDisposable , IObjectWithBounds , IRasterImageArgb32PixelLoader , IRasterImageRawDataLoader , IHasXmpData , IHasMetadata
anggota yang diwarisi
RasterCachedImage.CacheData() , RasterCachedImage.Blend(Point, RasterImage, Rectangle, byte) , RasterCachedImage.Resize(int, int, ResizeType) , RasterCachedImage.Resize(int, int, ImageResizeSettings) , RasterCachedImage.RotateFlip(RotateFlipType) , RasterCachedImage.Rotate(float, bool, Color) , RasterCachedImage.Crop(Rectangle) , RasterCachedImage.Dither(DitheringMethod, int, IColorPalette) , RasterCachedImage.Grayscale() , RasterCachedImage.NormalizeHistogram() , RasterCachedImage.BinarizeFixed(byte) , RasterCachedImage.BinarizeOtsu() , RasterCachedImage.BinarizeBradley(double, int) , RasterCachedImage.BinarizeBradley(double) , RasterCachedImage.AdjustBrightness(int) , RasterCachedImage.AdjustContrast(float) , RasterCachedImage.AdjustGamma(float, float, float) , RasterCachedImage.AdjustGamma(float) , RasterCachedImage.IsCached , RasterImage.RemoveMetadata() , RasterImage.Save(Stream, ImageOptionsBase, Rectangle) , RasterImage.GetModifyDate(bool) , RasterImage.Dither(DitheringMethod, int) , RasterImage.Dither(DitheringMethod, int, IColorPalette) , RasterImage.GetDefaultPixels(Rectangle, IPartialArgb32PixelLoader) , RasterImage.GetDefaultRawData(Rectangle, IPartialRawDataLoader, RawDataSettings) , RasterImage.GetDefaultArgb32Pixels(Rectangle) , RasterImage.GetDefaultRawData(Rectangle, RawDataSettings) , RasterImage.GetArgb32Pixel(int, int) , RasterImage.GetPixel(int, int) , RasterImage.SetArgb32Pixel(int, int, int) , RasterImage.SetPixel(int, int, Color) , RasterImage.ReadScanLine(int) , RasterImage.ReadArgb32ScanLine(int) , RasterImage.WriteScanLine(int, Color[]) , RasterImage.WriteArgb32ScanLine(int, int[]) , RasterImage.LoadPartialArgb32Pixels(Rectangle, IPartialArgb32PixelLoader) , RasterImage.LoadPartialPixels(Rectangle, IPartialPixelLoader) , RasterImage.LoadArgb32Pixels(Rectangle) , RasterImage.LoadArgb64Pixels(Rectangle) , RasterImage.LoadPartialArgb64Pixels(Rectangle, IPartialArgb64PixelLoader) , RasterImage.LoadPixels(Rectangle) , RasterImage.LoadCmykPixels(Rectangle) , RasterImage.LoadCmyk32Pixels(Rectangle) , RasterImage.LoadRawData(Rectangle, RawDataSettings, IPartialRawDataLoader) , RasterImage.LoadRawData(Rectangle, Rectangle, RawDataSettings, IPartialRawDataLoader) , RasterImage.SaveRawData(byte[], int, Rectangle, RawDataSettings) , RasterImage.SaveArgb32Pixels(Rectangle, int[]) , RasterImage.SavePixels(Rectangle, Color[]) , RasterImage.SaveCmykPixels(Rectangle, CmykColor[]) , RasterImage.SaveCmyk32Pixels(Rectangle, int[]) , RasterImage.SetResolution(double, double) , RasterImage.SetPalette(IColorPalette, bool) , RasterImage.Resize(int, int, ImageResizeSettings) , RasterImage.Rotate(float, bool, Color) , RasterImage.Rotate(float) , RasterImage.BinarizeFixed(byte) , RasterImage.BinarizeOtsu() , RasterImage.BinarizeBradley(double) , RasterImage.BinarizeBradley(double, int) , RasterImage.Blend(Point, RasterImage, Rectangle, byte) , RasterImage.Blend(Point, RasterImage, byte) , RasterImage.Grayscale() , RasterImage.NormalizeHistogram() , RasterImage.AdjustBrightness(int) , RasterImage.AdjustContrast(float) , RasterImage.AdjustGamma(float, float, float) , RasterImage.AdjustGamma(float) , RasterImage.GetSkewAngle() , RasterImage.NormalizeAngle() , RasterImage.NormalizeAngle(bool, Color) , RasterImage.Filter(Rectangle, FilterOptionsBase) , RasterImage.ReplaceColor(Color, byte, Color) , RasterImage.ReplaceColor(int, byte, int) , RasterImage.ReplaceNonTransparentColors(Color) , RasterImage.ReplaceNonTransparentColors(int) , RasterImage.ToBitmap() , RasterImage.PremultiplyComponents , RasterImage.UseRawData , RasterImage.UpdateXmpData , RasterImage.XmpData , RasterImage.RawIndexedColorConverter , RasterImage.RawCustomColorConverter , RasterImage.RawFallbackIndex , RasterImage.RawDataSettings , RasterImage.UsePalette , RasterImage.RawDataFormat , RasterImage.RawLineSize , RasterImage.IsRawDataAvailable , RasterImage.HorizontalResolution , RasterImage.VerticalResolution , RasterImage.HasTransparentColor , RasterImage.HasAlpha , RasterImage.TransparentColor , RasterImage.ImageOpacity , Image.CanLoad(string) , Image.CanLoad(string, LoadOptions) , Image.CanLoad(Stream) , Image.CanLoad(Stream, LoadOptions) , Image.Create(ImageOptionsBase, int, int) , Image.Create(Image[]) , Image.Create(MultipageCreateOptions) , Image.Create(string[], bool) , Image.Create(string[]) , Image.Create(Image[], bool) , Image.GetFileFormat(string) , Image.GetFileFormat(Stream) , Image.GetFittingRectangle(Rectangle, int, int) , Image.GetFittingRectangle(Rectangle, int[], int, int) , Image.Load(string, LoadOptions) , Image.Load(string) , Image.Load(Stream, LoadOptions) , Image.Load(Stream) , Image.GetProportionalWidth(int, int, int) , Image.GetProportionalHeight(int, int, int) , Image.RemoveMetadata() , Image.CanSave(ImageOptionsBase) , Image.Resize(int, int) , Image.Resize(int, int, ResizeType) , Image.Resize(int, int, ImageResizeSettings) , Image.GetDefaultOptions(object[]) , Image.GetOriginalOptions() , Image.ResizeWidthProportionally(int) , Image.ResizeHeightProportionally(int) , Image.ResizeWidthProportionally(int, ResizeType) , Image.ResizeHeightProportionally(int, ResizeType) , Image.ResizeWidthProportionally(int, ImageResizeSettings) , Image.ResizeHeightProportionally(int, ImageResizeSettings) , Image.RotateFlip(RotateFlipType) , Image.Rotate(float) , Image.Crop(Rectangle) , Image.Crop(int, int, int, int) , Image.Save() , Image.Save(string) , Image.Save(string, ImageOptionsBase) , Image.Save(string, ImageOptionsBase, Rectangle) , Image.Save(Stream, ImageOptionsBase) , Image.Save(Stream, ImageOptionsBase, Rectangle) , Image.GetSerializedStream(ImageOptionsBase, Rectangle, out int) , Image.SetPalette(IColorPalette, bool) , Image.BitsPerPixel , Image.Bounds , Image.Container , Image.Height , Image.Palette , Image.UsePalette , Image.Size , Image.Width , Image.InterruptMonitor , Image.BufferSizeHint , Image.AutoAdjustPalette , Image.HasBackgroundColor , Image.FileFormat , Image.BackgroundColor , DataStreamSupporter.CacheData() , DataStreamSupporter.Save() , DataStreamSupporter.Save(Stream) , DataStreamSupporter.Save(string) , DataStreamSupporter.Save(string, bool) , DataStreamSupporter.DataStreamContainer , DataStreamSupporter.IsCached , DisposableObject.Dispose() , DisposableObject.Disposed , object.GetType() , object.ToString() , object.Equals(object?) , object.Equals(object?, object?) , object.ReferenceEquals(object?, object?) , object.GetHashCode()
Examples
Decompress BMP image yang sebelumnya dikompresi menggunakan algoritma kompresi DXT1.
using (var image = Image.Load("CompressedTiger.bmp"))
{
image.Save("DecompressedTiger.bmp", new BmpOptions());
}Mengkompresi gambar BMP menggunakan algoritma kompresi DXT1.
using (var image = Image.Load("Tiger.bmp"))
{
image.Save("CompressedTiger.bmp", new BmpOptions { Compression = BitmapCompression.Dxt1 });
}Contohnya menunjukkan bagaimana untuk menghapus objek dari gambar menggunakan Graphics Path dengan algoritma Telea.
var imageFilePath = "ball.png";
using (var image = Image.Load(imageFilePath))
{
var pngImage = (PngImage)image;
var mask = new GraphicsPath();
var firstFigure = new Figure();
firstFigure.AddShape(new EllipseShape(new RectangleF(350, 170, 570 - 350, 400 - 170)));
mask.AddFigure(firstFigure);
var options = new TeleaWatermarkOptions(mask);
var result = WatermarkRemover.PaintOver(pngImage, options);
result.Save(outputPath);
}Contohnya menunjukkan bagaimana mengekspor BmpImage dengan tipe kompresi Rgb.
string sourcePath = "input.png";
// Load a PNG image from a file.
using (Image pngImage = Image.Load(sourcePath))
{
// BMP image is saved with transparency support by default, that is achieved by using the BitmapCompression.Bitfields compression method.
// To save a BMP image with the Rgb compression method, the BmpOptions with the Compression property set to BitmapCompression.Rgb should be specified.
pngImage.Save(outputPath, new BmpOptions() { Compression = BitmapCompression.Rgb });
}Contohnya menunjukkan bagaimana untuk menghapus objek dari gambar menggunakan Graphics Path dengan Content Aware mengisi algoritma.
var imageFilePath = "ball.png";
using (var image = Image.Load(imageFilePath))
{
var pngImage = (PngImage)image;
var mask = new GraphicsPath();
var firstFigure = new Figure();
firstFigure.AddShape(new EllipseShape(new RectangleF(350, 170, 570 - 350, 400 - 170)));
mask.AddFigure(firstFigure);
var options = new ContentAwareFillWatermarkOptions(mask)
{
MaxPaintingAttempts = 4
};
var result = WatermarkRemover.PaintOver(pngImage, options);
result.Save(outputPath);
}Contoh berikut menunjukkan cara membuat gambar BMP dari ukuran yang ditentukan.
string dir = "c:\\temp\\";
// Create a BMP image 100 x 100 px.
using (Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = new Aspose.Imaging.FileFormats.Bmp.BmpImage(100, 100))
{
// Fill the image with a simple linear red-black gradient.
int width = bmpImage.Width;
int height = bmpImage.Height;
for (int y = 0; y < height; y++)
{
for (int x = 0; x < width; x++)
{
int hue = (255 * x) / width;
bmpImage.SetPixel(x, y, Aspose.Imaging.Color.FromArgb(255, hue, 0, 0));
}
}
using (System.IO.FileStream stream = new System.IO.FileStream(dir + "output.bmp", System.IO.FileMode.Create))
{
bmpImage.Save(stream);
}
}Contohnya menunjukkan cara mengekspor BmpImage dari file Png sambil menyimpan saluran alfa, menyimpan file Bmp dengan transparan.
string sourcePath = "input.png";
// Load a PNG image from a file.
using (Image pngImage = Image.Load(sourcePath))
{
// BMP image is saved with transparency support by default.
// If you want to explicitly specify such mode, the BmpOptions's Compression property should be set to BitmapCompression.Bitfields.
// The BitmapCompression.Bitfields compression method is the default compression method in the BmpOptions.
// So the same result of exporting a Bmp image with transparency can be achieved by either one of the following ways.
// With an implicit default options:
pngImage.Save(outputPath);
// With an explicit default options:
pngImage.Save(outputPath, new BmpOptions());
// Specifying the BitmapCompression.Bitfields compression method:
pngImage.Save(outputPath, new BmpOptions() { Compression = BitmapCompression.Bitfields });
}Constructors
BmpImage(String)
Mulai menggunakan kelas BmpImage dengan mudah dengan konstruktor ini yangmemulai instansi baru. sempurna untuk pengembang yang ingin naik danberjalan dengan Aspose.Imaging.FileFormats.Bmp.BmpImage objek dengan cepat dan efisien.
public BmpImage(string path)Parameters
path string
Jalan untuk memuat gambar dari dan memulai data piksel dan palet dengan.
Examples
Contohnya menunjukkan cara memuat BmpImage dari file.
string dir = "c:\\temp\\";
// Load a BMP image from a file.
// The source pixels will be converted to 32-bpp format if required.
using (Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = new Aspose.Imaging.FileFormats.Bmp.BmpImage(dir + "sample.bmp"))
{
// Do some image processing.
// Save to another BMP file.
bmpImage.Save(dir + "sample.output.32bpp.bmp");
}Exceptions
Gambar raster adalah nol.
Ketinggian harus positif.
Palet harus ditentukan untuk gambar dengan 8 bit per pixel atau kurang.
BmpImage(string, ushort, BitmapCompression, ganda, ganda)
Dengan mudah membuat contoh baru dari Aspose.Imaging.FileFormats.Bmp.BmpImage kelas dengan konstruktor ini,menggunakan parameter tertentu seperti jalur, bitPerPixel, dan kompresi. ideal untuk pengembangmencari untuk memulai objek BmpImage dengan cepat dan efisien, dengan kontrol yang akurattentang karakteristik gambar.
public BmpImage(string path, ushort bitsPerPixel, BitmapCompression compression, double horizontalResolution, double verticalResolution)Parameters
path string
Jalan untuk memuat gambar dari dan memulai data piksel dan palet dengan.
bitsPerPixel ushort
Bit per pixel.
compression BitmapCompression
Kompresi yang harus digunakan.
horizontalResolution double
Resolusi horizontal.Nota karena bulat resolusi yang dihasilkan dapat sedikit berbeda dari yang lalu.
verticalResolution double
Resolusi vertikal.Nota karena bulat resolusi yang dihasilkan dapat sedikit berbeda dari yang lalu.
Examples
Contohnya menunjukkan cara memuat BmpImage dari file dengan kedalaman dan resolusi bit yang ditentukan.
string dir = "c:\\temp\\";
// Load a BMP image from a file.
// The source pixels will be converted to 24-bpp format if required.
// The resolution will be set to 96 dpi.
using (Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage =
new Aspose.Imaging.FileFormats.Bmp.BmpImage(dir + "sample.bmp", 24, Aspose.Imaging.FileFormats.Bmp.BitmapCompression.Rgb, 96.0, 96.0))
{
// Do some image processing.
// Save to another BMP file.
bmpImage.Save(dir + "sample.output.24bpp.96dpi.bmp");
}Exceptions
Gambar raster adalah nol.
Ketinggian harus positif.
Palet harus ditentukan untuk gambar dengan 8 bit per pixel atau kurang.
BmpImage(Stream)
Mulai menggunakan Aspose.Imaging.FileFormats.Bmp.BmpImage kelas dengan mudah dengan memulai instans barudengan konstruktor ini, menggunakan arus sebagai input. sempurna untuk pengembang mencaricara yang mudah untuk bekerja dengan objek BmpImage dari berbagai sumber data,Menjamin fleksibilitas dan kemudahan integrasi.
public BmpImage(Stream stream)Parameters
stream Stream
Aliran untuk memuat gambar dari dan memulai data piksel dan palet dengan.
Examples
Contohnya menunjukkan cara memuat BmpImage dari arus file.
string dir = "c:\\temp\\";
// Load a BMP image from a file stream.
// The source pixels will be converted to 32-bpp format if required.
using (System.IO.Stream stream = System.IO.File.OpenRead(dir + "sample.bmp"))
{
using (Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = new Aspose.Imaging.FileFormats.Bmp.BmpImage(stream))
{
// Do some image processing.
// Save to another BMP file.
bmpImage.Save(dir + "sample.output.32bpp.bmp");
}
}Exceptions
Gambar raster adalah nol.
Ketinggian harus positif.
Palet harus ditentukan untuk gambar dengan 8 bit per pixel atau kurang.
BmpImage(Stream, ushort, BitmapCompression, ganda, ganda)
Mulai bekerja dengan Aspose.Imaging.FileFormats.Bmp.BmpImage kelas tanpa henti dengan membuatinstansi baru menggunakan arus, bersama dengan parameter tertentu seperti bitsPerPixeldan kompresi. sempurna untuk pengembang yang mencari cara mudah untuk menanganiBmpImage objek, memastikan fleksibilitas dan efisiensi dalam proyek mereka.
public BmpImage(Stream stream, ushort bitsPerPixel, BitmapCompression compression, double horizontalResolution, double verticalResolution)Parameters
stream Stream
Aliran untuk memuat gambar dari dan memulai data piksel dan palet dengan.
bitsPerPixel ushort
Bit per pixel.
compression BitmapCompression
Kompresi yang harus digunakan.
horizontalResolution double
Resolusi horizontal.Nota karena bulat resolusi yang dihasilkan dapat sedikit berbeda dari yang lalu.
verticalResolution double
Resolusi vertikal.Nota karena bulat resolusi yang dihasilkan dapat sedikit berbeda dari yang lalu.
Examples
Contohnya menunjukkan cara memuat BmpImage dari arus file dengan kedalaman dan resolusi bit yang ditentukan.
string dir = "c:\\temp\\";
// Load a BMP image from a file stream.
// The source pixels will be converted to 24-bpp format if required.
// The resolution will be set to 96 dpi.
using (System.IO.Stream stream = System.IO.File.OpenRead(dir + "sample.bmp"))
{
using (Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage =
new Aspose.Imaging.FileFormats.Bmp.BmpImage(stream, 24, Aspose.Imaging.FileFormats.Bmp.BitmapCompression.Rgb, 96.0, 96.0))
{
// Do some image processing.
// Save to another BMP file.
bmpImage.Save(dir + "sample.output.24bpp.96dpi.bmp");
}
}Exceptions
Gambar raster adalah nol.
Ketinggian harus positif.
Palet harus ditentukan untuk gambar dengan 8 bit per pixel atau kurang.
BmpImage(RasterImage)
Dengan mudah membuat contoh baru dari Aspose.Imaging.FileFormats.Bmp.BmpImage kelasdengan memulai dengan objek RasterImage. sempurna untuk pengembang yang melihatuntuk secara tidak sengaja mengubah gambar raster yang ada ke format BmpImage,Kompatibilitas dan kemudahan integrasi ke dalam proyek mereka.
public BmpImage(RasterImage rasterImage)Parameters
rasterImage RasterImage
Gambar untuk memulai piksel dan palet data dengan.
Examples
Contohnya menunjukkan cara memuat BmpImage dari instansi lain dari RasterImage.
string dir = "c:\\temp\\";
// Create a new PNG image.
Aspose.Imaging.ImageOptions.PngOptions createOptions = new Aspose.Imaging.ImageOptions.PngOptions();
createOptions.Source = new Aspose.Imaging.Sources.StreamSource(new System.IO.MemoryStream(), true);
using (Aspose.Imaging.RasterImage rasterImage = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Create(createOptions, 100, 100))
{
// Fill the entire PNG image in red.
Aspose.Imaging.Graphics gr = new Aspose.Imaging.Graphics(rasterImage);
Aspose.Imaging.Brushes.SolidBrush brush = new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Red);
gr.FillRectangle(brush, rasterImage.Bounds);
// Create a BMP image based on the PNG image.
// The source pixels will be converted to 32-bpp format if required.
using (Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = new Aspose.Imaging.FileFormats.Bmp.BmpImage(rasterImage))
{
// Save to a BMP file
bmpImage.Save(dir + "output.32bpp.bmp");
}
}Exceptions
Gambar raster adalah nol.
Ketinggian harus positif.
Palet harus ditentukan untuk gambar dengan 8 bit per pixel atau kurang.
BmpImage(RasterImage, ushort, BitmapCompression, ganda, ganda)
Mulai bekerja dengan Aspose.Imaging.FileFormats.Bmp.BmpImage kelas tanpa henti dengan membuat instansi barumenggunakan rasterImage bersama dengan parameter tertentu seperti bitsPerPixel dan kompresi.Sempurna untuk pengembang yang mencari cara mudah untuk menangani objek BmpImage,Menjamin fleksibilitas dan efisiensi dalam proyek mereka.
public BmpImage(RasterImage rasterImage, ushort bitsPerPixel, BitmapCompression compression, double horizontalResolution, double verticalResolution)Parameters
rasterImage RasterImage
Gambar untuk memulai piksel dan palet data dengan.
bitsPerPixel ushort
Bit per pixel.
compression BitmapCompression
Kompresi yang harus digunakan.
horizontalResolution double
Resolusi horizontal.Nota karena bulat resolusi yang dihasilkan dapat sedikit berbeda dari yang lalu.
verticalResolution double
Resolusi vertikal.Nota karena bulat resolusi yang dihasilkan dapat sedikit berbeda dari yang lalu.
Examples
Contohnya menunjukkan cara mengisi BmpImage dari instansi lain dari RasterImage dengan kedalaman dan kompresi bit yang ditentukan.
string dir = "c:\\temp\\";
// Create a new PNG image.
Aspose.Imaging.ImageOptions.PngOptions createOptions = new Aspose.Imaging.ImageOptions.PngOptions();
createOptions.Source = new Aspose.Imaging.Sources.StreamSource(new System.IO.MemoryStream(), true);
using (Aspose.Imaging.RasterImage rasterImage = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Create(createOptions, 100, 100))
{
// Fill the entire PNG image in red.
Aspose.Imaging.Graphics gr = new Aspose.Imaging.Graphics(rasterImage);
Aspose.Imaging.Brushes.SolidBrush brush = new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Red);
gr.FillRectangle(brush, rasterImage.Bounds);
// Create a BMP image based on the PNG image.
// The source pixels will be converted to 24-bpp format if required.
// The resolution will be set to 96 dpi.
using (Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = new Aspose.Imaging.FileFormats.Bmp.BmpImage(rasterImage, 24, Aspose.Imaging.FileFormats.Bmp.BitmapCompression.Rgb, 96.0, 96.0))
{
// Save to a BMP file
bmpImage.Save(dir + "output.24bpp.96dpi.bmp");
}
}Exceptions
Gambar raster adalah nol.
Ketinggian harus positif.
Palet harus ditentukan untuk gambar dengan 8 bit per pixel atau kurang.
BmpImage(dengan int, int)
Mulai menggunakan Aspose.Imaging.FileFormats.Bmp.BmpImage kelas dengan mudah dengan membuat instans barudengan parameter lebar dan ketinggian yang ditentukan. ideal untuk pengembang mencaricara yang mudah untuk menghasilkan objek BmpImage dimensi yang disesuaikan, memastikanfleksibilitas dan kemudahan integrasi dalam proyek-proyek mereka.
public BmpImage(int width, int height)Parameters
width int
Gambar yang luas.
height int
Ukuran gambar tinggi.
Examples
Contohnya menunjukkan cara membuat BmpImage dari ukuran yang ditentukan.
string dir = "c:\\temp\\";
// Create a 32-bpp BMP image of 100 x 100 px.
using (Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = new Aspose.Imaging.FileFormats.Bmp.BmpImage(100, 100))
{
// Fill the entire image in red.
Aspose.Imaging.Graphics gr = new Aspose.Imaging.Graphics(bmpImage);
Aspose.Imaging.Brushes.SolidBrush brush = new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Red);
gr.FillRectangle(brush, bmpImage.Bounds);
// Save to a BMP file
bmpImage.Save(dir + "output.bmp");
}Contoh berikut menunjukkan bagaimana untuk memaletkan gambar BMP untuk mengurangi ukuran outputnya.
// Create a BMP image 100 x 100 px.
using (Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = new Aspose.Imaging.FileFormats.Bmp.BmpImage(100, 100))
{
// The linear gradient from the left-top to the right-bottom corner of the image.
Aspose.Imaging.Brushes.LinearGradientBrush brush =
new Aspose.Imaging.Brushes.LinearGradientBrush(
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(bmpImage.Width, bmpImage.Height),
Aspose.Imaging.Color.Red,
Aspose.Imaging.Color.Green);
// Fill the entire image with the linear gradient brush.
Aspose.Imaging.Graphics gr = new Aspose.Imaging.Graphics(bmpImage);
gr.FillRectangle(brush, bmpImage.Bounds);
// Get the closest 8-bit color palette which covers as many pixels as possible, so that a palettized image
// is almost visually indistinguishable from a non-palletized one.
Aspose.Imaging.IColorPalette palette = Aspose.Imaging.ColorPaletteHelper.GetCloseImagePalette(bmpImage, 256);
// 8-bit palette contains at most 256 colors.
Aspose.Imaging.ImageOptions.BmpOptions saveOptions = new Aspose.Imaging.ImageOptions.BmpOptions();
saveOptions.Palette = palette;
saveOptions.BitsPerPixel = 8;
using (System.IO.MemoryStream stream = new System.IO.MemoryStream())
{
bmpImage.Save(stream, saveOptions);
System.Console.WriteLine("The palettized image size is {0} bytes.", stream.Length);
}
using (System.IO.MemoryStream stream = new System.IO.MemoryStream())
{
bmpImage.Save(stream);
System.Console.WriteLine("The non-palettized image size is {0} bytes.", stream.Length);
}
}
// The output looks like this:
// The palettized image size is 11078 bytes.
// The non-palettized image size is 40054 bytes.Exceptions
Ketinggian harus positif.
Palet harus ditentukan untuk gambar dengan 8 bit per pixel atau kurang.
BmpImage(int, int, ushort, IColorPalette)
Mulai menggunakan Aspose.Imaging.FileFormats.Bmp.BmpImage kelas tanpa sengaja dengan memulai instans barudengan parameter seperti lebar, ketinggian, kedalaman bit, dan palet.pengembang mencari cara yang mudah untuk membuat objek BmpImage dengandimensi dan konfigurasi warna yang disesuaikan, memastikan fleksibilitas dan efisiensi dalam proyek mereka.
public BmpImage(int width, int height, ushort bitsPerPixel, IColorPalette palette)Parameters
width int
Gambar yang luas.
height int
Ukuran gambar tinggi.
bitsPerPixel ushort
Bit per pixel.
palette IColorPalette
dengan palet warna.
Examples
Contohnya menunjukkan cara membuat BmpImage dari ukuran yang ditentukan dengan palet yang ditentukan.
string dir = "c:\\temp\\";
Aspose.Imaging.Color[] paletterColors = new Aspose.Imaging.Color[]
{
Aspose.Imaging.Color.Red,
Aspose.Imaging.Color.Green,
};
// Create a monochrome palette which contains only red and green colors.
Aspose.Imaging.IColorPalette palette = new Aspose.Imaging.ColorPalette(paletterColors);
// Create a monochrome 1-bpp BMP image of 100 x 100 px.
using (Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = new Aspose.Imaging.FileFormats.Bmp.BmpImage(100, 100, 1, palette))
{
Aspose.Imaging.Graphics gr = new Aspose.Imaging.Graphics(bmpImage);
// Fill the upper half of the image in red.
Aspose.Imaging.Brushes.SolidBrush redBrush = new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Red);
gr.FillRectangle(redBrush, new Aspose.Imaging.Rectangle(0, 0, bmpImage.Width, bmpImage.Height / 2));
// Fill the lower half of the image in green.
Aspose.Imaging.Brushes.SolidBrush greenBrush = new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Green);
gr.FillRectangle(greenBrush, new Aspose.Imaging.Rectangle(0, bmpImage.Height / 2, bmpImage.Width, bmpImage.Height / 2));
// Save to BMP
bmpImage.Save(dir + "output.monochrome.bmp");
}Exceptions
Ketinggian harus positif.
Palet harus ditentukan untuk gambar dengan 8 bit per pixel atau kurang.
BmpImage(int, int, ushort, IColorPalette, BitmapCompression, ganda, ganda)
Dengan mudah membuat contoh baru dari Aspose.Imaging.FileFormats.Bmp.BmpImage kelas dengan konstruktor ini,menentukan parameter seperti lebar, ketinggian, bitsPerPixel, dan palet.mencari cara yang nyaman untuk menghasilkan objek BmpImage dengan dimensi yang disesuaikandan konfigurasi warna, memastikan fleksibilitas dan kemudahan integrasi ke dalam proyek mereka.
public BmpImage(int width, int height, ushort bitsPerPixel, IColorPalette palette, BitmapCompression compression, double horizontalResolution, double verticalResolution)Parameters
width int
Gambar yang luas.
height int
Ukuran gambar tinggi.
bitsPerPixel ushort
Bit per pixel.
palette IColorPalette
dengan palet warna.
compression BitmapCompression
Kompresi yang harus digunakan.
horizontalResolution double
Resolusi horizontal.Nota karena bulat resolusi yang dihasilkan dapat sedikit berbeda dari yang lalu.
verticalResolution double
Resolusi vertikal.Nota karena bulat resolusi yang dihasilkan dapat sedikit berbeda dari yang lalu.
Examples
Contohnya menunjukkan cara membuat BmpImage menggunakan berbagai opsi.
string dir = "c:\\temp\\";
Aspose.Imaging.Color[] paletterColors = new Aspose.Imaging.Color[]
{
Aspose.Imaging.Color.Red,
Aspose.Imaging.Color.Green,
};
// Create a monochrome palette which contains only red and green colors.
Aspose.Imaging.IColorPalette palette = new Aspose.Imaging.ColorPalette(paletterColors);
// Create a monochrome 1-bpp BMP image of 100 x 100 px.
// The horizontal and vertical resolution will be set to 96 dpi.
using (Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = new Aspose.Imaging.FileFormats.Bmp.BmpImage(100, 100, 1, palette, Aspose.Imaging.FileFormats.Bmp.BitmapCompression.Rgb, 96.0, 96.0))
{
Aspose.Imaging.Graphics gr = new Aspose.Imaging.Graphics(bmpImage);
// Fill the upper half of the image in red.
Aspose.Imaging.Brushes.SolidBrush redBrush = new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Red);
gr.FillRectangle(redBrush, new Aspose.Imaging.Rectangle(0, 0, bmpImage.Width, bmpImage.Height / 2));
// Fill the lower half of the image in green.
Aspose.Imaging.Brushes.SolidBrush greenBrush = new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Green);
gr.FillRectangle(greenBrush, new Aspose.Imaging.Rectangle(0, bmpImage.Height / 2, bmpImage.Width, bmpImage.Height / 2));
// Save to a BMP file
bmpImage.Save(dir + "output.monochrome.96dpi.bmp");
}Exceptions
Ketinggian harus positif.
Palet harus ditentukan untuk gambar dengan 8 bit per pixel atau kurang.
Properties
BitmapInfoHeader
Cepat mengakses informasi penting tentang gambar bitmap Anda dengan fungsi sederhana ini.Sempurna untuk pengembang yang perlu mendapatkan informasi tajuk untuk gambar mereka.
public BitmapInfoHeader BitmapInfoHeader { get; }Nilai Properti
Examples
Contoh berikut mendapatkan informasi dari header BMP dan mencetaknya ke konsol.
using (Aspose.Imaging.Image image = Aspose.Imaging.Image.Load(@"c:\temp\sample.bmp"))
{
Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = (Aspose.Imaging.FileFormats.Bmp.BmpImage)image;
Aspose.Imaging.FileFormats.Bmp.BitmapInfoHeader header = bmpImage.BitmapInfoHeader;
System.Console.WriteLine("The number of palette colors that are required for displaying the bitmap: {0}", header.BitmapColorsImportant);
System.Console.WriteLine("The number of palette colors used in the bitmap: {0}", header.BitmapColorsUsed);
System.Console.WriteLine("The bitmap compression: {0}", header.BitmapCompression);
System.Console.WriteLine("The bitmap height: {0}", header.BitmapHeight);
System.Console.WriteLine("The bitmap width: {0}", header.BitmapWidth);
System.Console.WriteLine("The bitmap raw data size in bytes: {0}", header.BitmapImageSize);
System.Console.WriteLine("The number of planes: {0}", header.BitmapPlanes);
System.Console.WriteLine("The horizontal resolution of the bitmap, in pixels-per-meter: {0}", header.BitmapXPelsPerMeter);
System.Console.WriteLine("The vertical resolution of the bitmap, in pixels-per-meter: {0}", header.BitmapYPelsPerMeter);
System.Console.WriteLine("The number of bits per pixel: {0}", header.BitsPerPixel);
System.Console.WriteLine("The extra bits masks: {0}", header.ExtraBitMasks);
System.Console.WriteLine("The header size in bytes: {0}", header.HeaderSize);
}
//The output may look like this:
//The number of palette colors that are required for displaying the bitmap: 0
//The number of palette colors used in the bitmap: 0
//The bitmap compression: 0
//The bitmap height: 375
//The bitmap width: 500
//The bitmap raw data size in bytes: 562500
//The number of planes: 1
//The horizontal resolution of the bitmap, in pixels-per-meter: 0
//The vertical resolution of the bitmap, in pixels-per-meter: 0
//The number of bits per pixel: 24
//The extra bits masks:
//The header size in bytes: 40BitsPerPixel
Akses ke jumlah bit per piksel untuk gambar dengan mudah menggunakan sifat ini.Sempurna untuk pengembang yang mencari informasi cepat tentang kualitas dan kedalaman gambar.
public override int BitsPerPixel { get; }Nilai Properti
Examples
Contoh berikut mendapatkan informasi umum tentang gambar termasuk format piksel, ukuran gambar, resolusi, kompresi, dll.
using (Aspose.Imaging.Image image = Aspose.Imaging.Image.Load(@"c:\temp\sample.bmp"))
{
Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = (Aspose.Imaging.FileFormats.Bmp.BmpImage)image;
System.Console.WriteLine("The pixel format: {0}", bmpImage.RawDataFormat);
System.Console.WriteLine("The raw line size in bytes: {0}", bmpImage.RawLineSize);
System.Console.WriteLine("The bitmap compression: {0}", bmpImage.Compression);
System.Console.WriteLine("The bitmap width: {0}", bmpImage.Width);
System.Console.WriteLine("The bitmap height: {0}", bmpImage.Height);
System.Console.WriteLine("The number of bits per pixel: {0}", bmpImage.BitsPerPixel);
double hres = bmpImage.HorizontalResolution;
double vres = bmpImage.VerticalResolution;
System.Console.WriteLine("The horizontal resolution, in pixels per inch: {0}", hres);
System.Console.WriteLine("The vertical resolution, in pixels per inch: {0}", vres);
if (hres != 96.0 || vres != 96.0)
{
// You may consider using the SetResolution method for updating both resolution values in single call.
System.Console.WriteLine("Set resolution values to 96 dpi");
bmpImage.SetResolution(96.0, 96.0);
System.Console.WriteLine("The horizontal resolution, in pixels per inch: {0}", bmpImage.HorizontalResolution);
System.Console.WriteLine("The vertical resolution, in pixels per inch: {0}", bmpImage.VerticalResolution);
}
//The output may look like this:
//The pixel format: Rgb24Bpp, used channels: 8,8,8
//The raw line size in bytes: 1500
//The bitmap compression: Rgb
//The bitmap width: 500
//The bitmap height: 375
//The number of bits per pixel: 24
//The horizontal resolution, in pixels per inch: 0
//The vertical resolution, in pixels per inch: 0
//Set resolution values to 96 dpi
//The horizontal resolution, in pixels per inch: 96.012
//The vertical resolution, in pixels per inch: 96.012
}Contoh berikut menunjukkan bagaimana kompresi bitmap mempengaruhi ukuran gambar output.
Aspose.Imaging.FileFormats.Bmp.BitmapCompression[] compressions = new Aspose.Imaging.FileFormats.Bmp.BitmapCompression[]
{
Aspose.Imaging.FileFormats.Bmp.BitmapCompression.Rgb,
Aspose.Imaging.FileFormats.Bmp.BitmapCompression.Rle8,
};
Aspose.Imaging.Color[] paletterColors = new Aspose.Imaging.Color[]
{
Aspose.Imaging.Color.Red,
Aspose.Imaging.Color.Green,
};
// Create a monochrome palette which contains only red and green colors.
Aspose.Imaging.IColorPalette palette = new Aspose.Imaging.ColorPalette(paletterColors);
foreach (Aspose.Imaging.FileFormats.Bmp.BitmapCompression compression in compressions)
{
// Create a 8-bpp BMP image of 100 x 100 px.
using (Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = new Aspose.Imaging.FileFormats.Bmp.BmpImage(100, 100, 8, palette, compression, 0.0, 0.0))
{
Aspose.Imaging.Graphics gr = new Aspose.Imaging.Graphics(bmpImage);
// Fill the entire image in red.
Aspose.Imaging.Brushes.SolidBrush redBrush = new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Red);
gr.FillRectangle(redBrush, bmpImage.Bounds);
// Save the image to a stream to get the output image size.
using (System.IO.MemoryStream stream = new System.IO.MemoryStream())
{
bmpImage.Save(stream);
System.Console.WriteLine("---------------------------------------------");
System.Console.WriteLine("The compression={0}", bmpImage.Compression);
System.Console.WriteLine("The number of bits per pixel={0}", bmpImage.BitsPerPixel);
System.Console.WriteLine("The image dimensions={0} x {1}", bmpImage.Width, bmpImage.Height);
System.Console.WriteLine("The raw line size={0}", bmpImage.RawLineSize);
System.Console.WriteLine("The output size in bytes={0}", stream.Length);
}
}
}
// The output looks like this:
// ---------------------------------------------
// The compression = Rgb
// The number of bits per pixel = 8
// The image dimensions = 100 x 100
// The raw line size = 100
// The output size in bytes = 11078
// ---------------------------------------------
// The compression = Rle8
// The number of bits per pixel = 8
// The image dimensions = 100 x 100
// The raw line size = 100
// The output size in bytes = 856Compression
Mengembalikan jenis kompresi yang digunakan untuk gambar dengan mudah dengan sifat ini.Sempurna untuk pengembang yang perlu mengakses informasi tentang kompresi gambar dengan cepat.
public BitmapCompression Compression { get; }Nilai Properti
Examples
Contoh berikut mendapatkan informasi umum tentang gambar termasuk format piksel, ukuran gambar, resolusi, kompresi, dll.
using (Aspose.Imaging.Image image = Aspose.Imaging.Image.Load(@"c:\temp\sample.bmp"))
{
Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = (Aspose.Imaging.FileFormats.Bmp.BmpImage)image;
System.Console.WriteLine("The pixel format: {0}", bmpImage.RawDataFormat);
System.Console.WriteLine("The raw line size in bytes: {0}", bmpImage.RawLineSize);
System.Console.WriteLine("The bitmap compression: {0}", bmpImage.Compression);
System.Console.WriteLine("The bitmap width: {0}", bmpImage.Width);
System.Console.WriteLine("The bitmap height: {0}", bmpImage.Height);
System.Console.WriteLine("The number of bits per pixel: {0}", bmpImage.BitsPerPixel);
double hres = bmpImage.HorizontalResolution;
double vres = bmpImage.VerticalResolution;
System.Console.WriteLine("The horizontal resolution, in pixels per inch: {0}", hres);
System.Console.WriteLine("The vertical resolution, in pixels per inch: {0}", vres);
if (hres != 96.0 || vres != 96.0)
{
// You may consider using the SetResolution method for updating both resolution values in single call.
System.Console.WriteLine("Set resolution values to 96 dpi");
bmpImage.SetResolution(96.0, 96.0);
System.Console.WriteLine("The horizontal resolution, in pixels per inch: {0}", bmpImage.HorizontalResolution);
System.Console.WriteLine("The vertical resolution, in pixels per inch: {0}", bmpImage.VerticalResolution);
}
//The output may look like this:
//The pixel format: Rgb24Bpp, used channels: 8,8,8
//The raw line size in bytes: 1500
//The bitmap compression: Rgb
//The bitmap width: 500
//The bitmap height: 375
//The number of bits per pixel: 24
//The horizontal resolution, in pixels per inch: 0
//The vertical resolution, in pixels per inch: 0
//Set resolution values to 96 dpi
//The horizontal resolution, in pixels per inch: 96.012
//The vertical resolution, in pixels per inch: 96.012
}Contoh berikut menunjukkan bagaimana kompresi bitmap mempengaruhi ukuran gambar output.
Aspose.Imaging.FileFormats.Bmp.BitmapCompression[] compressions = new Aspose.Imaging.FileFormats.Bmp.BitmapCompression[]
{
Aspose.Imaging.FileFormats.Bmp.BitmapCompression.Rgb,
Aspose.Imaging.FileFormats.Bmp.BitmapCompression.Rle8,
};
Aspose.Imaging.Color[] paletterColors = new Aspose.Imaging.Color[]
{
Aspose.Imaging.Color.Red,
Aspose.Imaging.Color.Green,
};
// Create a monochrome palette which contains only red and green colors.
Aspose.Imaging.IColorPalette palette = new Aspose.Imaging.ColorPalette(paletterColors);
foreach (Aspose.Imaging.FileFormats.Bmp.BitmapCompression compression in compressions)
{
// Create a 8-bpp BMP image of 100 x 100 px.
using (Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = new Aspose.Imaging.FileFormats.Bmp.BmpImage(100, 100, 8, palette, compression, 0.0, 0.0))
{
Aspose.Imaging.Graphics gr = new Aspose.Imaging.Graphics(bmpImage);
// Fill the entire image in red.
Aspose.Imaging.Brushes.SolidBrush redBrush = new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Red);
gr.FillRectangle(redBrush, bmpImage.Bounds);
// Save the image to a stream to get the output image size.
using (System.IO.MemoryStream stream = new System.IO.MemoryStream())
{
bmpImage.Save(stream);
System.Console.WriteLine("---------------------------------------------");
System.Console.WriteLine("The compression={0}", bmpImage.Compression);
System.Console.WriteLine("The number of bits per pixel={0}", bmpImage.BitsPerPixel);
System.Console.WriteLine("The image dimensions={0} x {1}", bmpImage.Width, bmpImage.Height);
System.Console.WriteLine("The raw line size={0}", bmpImage.RawLineSize);
System.Console.WriteLine("The output size in bytes={0}", stream.Length);
}
}
}
// The output looks like this:
// ---------------------------------------------
// The compression = Rgb
// The number of bits per pixel = 8
// The image dimensions = 100 x 100
// The raw line size = 100
// The output size in bytes = 11078
// ---------------------------------------------
// The compression = Rle8
// The number of bits per pixel = 8
// The image dimensions = 100 x 100
// The raw line size = 100
// The output size in bytes = 856FileFormat
Mudah mendapatkan nilai format file dengan sifat yang ramah pengguna ini.Ideal untuk pengembang yang mencari akses cepat ke informasi tentang format file.
public override FileFormat FileFormat { get; }Nilai Properti
Examples
Contoh berikut menunjukkan bagaimana untuk mengekstrak informasi tentang format data mentah dan saluran alfa dari gambar BMP.
// Create a 32-bpp BMP image of 100 x 100 px.
using (Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = new Aspose.Imaging.FileFormats.Bmp.BmpImage(100, 100, 32, null))
{
System.Console.WriteLine("FileFormat={0}, RawDataFormat={1}, HasAlpha={2}", bmpImage.FileFormat, bmpImage.RawDataFormat, bmpImage.HasAlpha);
};
// Create a 24-bpp BMP image of 100 x 100 px.
using (Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = new Aspose.Imaging.FileFormats.Bmp.BmpImage(100, 100, 24, null))
{
System.Console.WriteLine("FileFormat={0}, RawDataFormat={1}, HasAlpha={2}", bmpImage.FileFormat, bmpImage.RawDataFormat, bmpImage.HasAlpha);
};
// Generally, BMP doesn't support alpha channel so the output will look like this:
// FileFormat = Bmp, RawDataFormat = Rgb32Bpp, used channels: 8,8,8,8, HasAlpha = False
// FileFormat = Bmp, RawDataFormat = Rgb24Bpp, used channels: 8,8,8, HasAlpha = FalseHasAlpha
Dapatkan nilai yang menunjukkan apakah instans ini memiliki alfa.
public override bool HasAlpha { get; }Nilai Properti
Height
Mengembalikan ketinggian gambar dengan mudah dengan sifat ini. ideal untuk pengembangmemerlukan akses cepat ke informasi tentang dimensi gambar.
public override int Height { get; }Nilai Properti
Examples
Contoh berikut mendapatkan informasi umum tentang gambar termasuk format piksel, ukuran gambar, resolusi, kompresi, dll.
using (Aspose.Imaging.Image image = Aspose.Imaging.Image.Load(@"c:\temp\sample.bmp"))
{
Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = (Aspose.Imaging.FileFormats.Bmp.BmpImage)image;
System.Console.WriteLine("The pixel format: {0}", bmpImage.RawDataFormat);
System.Console.WriteLine("The raw line size in bytes: {0}", bmpImage.RawLineSize);
System.Console.WriteLine("The bitmap compression: {0}", bmpImage.Compression);
System.Console.WriteLine("The bitmap width: {0}", bmpImage.Width);
System.Console.WriteLine("The bitmap height: {0}", bmpImage.Height);
System.Console.WriteLine("The number of bits per pixel: {0}", bmpImage.BitsPerPixel);
double hres = bmpImage.HorizontalResolution;
double vres = bmpImage.VerticalResolution;
System.Console.WriteLine("The horizontal resolution, in pixels per inch: {0}", hres);
System.Console.WriteLine("The vertical resolution, in pixels per inch: {0}", vres);
if (hres != 96.0 || vres != 96.0)
{
// You may consider using the SetResolution method for updating both resolution values in single call.
System.Console.WriteLine("Set resolution values to 96 dpi");
bmpImage.SetResolution(96.0, 96.0);
System.Console.WriteLine("The horizontal resolution, in pixels per inch: {0}", bmpImage.HorizontalResolution);
System.Console.WriteLine("The vertical resolution, in pixels per inch: {0}", bmpImage.VerticalResolution);
}
//The output may look like this:
//The pixel format: Rgb24Bpp, used channels: 8,8,8
//The raw line size in bytes: 1500
//The bitmap compression: Rgb
//The bitmap width: 500
//The bitmap height: 375
//The number of bits per pixel: 24
//The horizontal resolution, in pixels per inch: 0
//The vertical resolution, in pixels per inch: 0
//Set resolution values to 96 dpi
//The horizontal resolution, in pixels per inch: 96.012
//The vertical resolution, in pixels per inch: 96.012
}Contoh berikut menunjukkan bagaimana kompresi bitmap mempengaruhi ukuran gambar output.
Aspose.Imaging.FileFormats.Bmp.BitmapCompression[] compressions = new Aspose.Imaging.FileFormats.Bmp.BitmapCompression[]
{
Aspose.Imaging.FileFormats.Bmp.BitmapCompression.Rgb,
Aspose.Imaging.FileFormats.Bmp.BitmapCompression.Rle8,
};
Aspose.Imaging.Color[] paletterColors = new Aspose.Imaging.Color[]
{
Aspose.Imaging.Color.Red,
Aspose.Imaging.Color.Green,
};
// Create a monochrome palette which contains only red and green colors.
Aspose.Imaging.IColorPalette palette = new Aspose.Imaging.ColorPalette(paletterColors);
foreach (Aspose.Imaging.FileFormats.Bmp.BitmapCompression compression in compressions)
{
// Create a 8-bpp BMP image of 100 x 100 px.
using (Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = new Aspose.Imaging.FileFormats.Bmp.BmpImage(100, 100, 8, palette, compression, 0.0, 0.0))
{
Aspose.Imaging.Graphics gr = new Aspose.Imaging.Graphics(bmpImage);
// Fill the entire image in red.
Aspose.Imaging.Brushes.SolidBrush redBrush = new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Red);
gr.FillRectangle(redBrush, bmpImage.Bounds);
// Save the image to a stream to get the output image size.
using (System.IO.MemoryStream stream = new System.IO.MemoryStream())
{
bmpImage.Save(stream);
System.Console.WriteLine("---------------------------------------------");
System.Console.WriteLine("The compression={0}", bmpImage.Compression);
System.Console.WriteLine("The number of bits per pixel={0}", bmpImage.BitsPerPixel);
System.Console.WriteLine("The image dimensions={0} x {1}", bmpImage.Width, bmpImage.Height);
System.Console.WriteLine("The raw line size={0}", bmpImage.RawLineSize);
System.Console.WriteLine("The output size in bytes={0}", stream.Length);
}
}
}
// The output looks like this:
// ---------------------------------------------
// The compression = Rgb
// The number of bits per pixel = 8
// The image dimensions = 100 x 100
// The raw line size = 100
// The output size in bytes = 11078
// ---------------------------------------------
// The compression = Rle8
// The number of bits per pixel = 8
// The image dimensions = 100 x 100
// The raw line size = 100
// The output size in bytes = 856HorizontalResolution
Properti ini memungkinkan Anda untuk dengan mudah mendapatkan atau menetapkan resolusi horizontal,diukur dalam piksel per inci, dari objek Aspose.Imaging.RasterImage.pengembang membutuhkan kontrol akurat resolusi gambar untuk aplikasi mereka.
public override double HorizontalResolution { get; set; }Nilai Properti
Examples
Contoh berikut menunjukkan bagaimana menetapkan resolusi horizontal/vertikal dari gambar BMP.
string dir = "c:\\temp\\";
using (Aspose.Imaging.Image image = Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = (Aspose.Imaging.FileFormats.Bmp.BmpImage)image;
// Get horizontal and vertical resolution of the BmpImage
double horizontalResolution = bmpImage.HorizontalResolution;
double verticalResolution = bmpImage.VerticalResolution;
System.Console.WriteLine("The horizontal resolution, in pixels per inch: {0}", horizontalResolution);
System.Console.WriteLine("The vertical resolution, in pixels per inch: {0}", verticalResolution);
if (horizontalResolution != 96.0 || verticalResolution != 96.0)
{
// Use the SetResolution method for updating both resolution values in a single call.
System.Console.WriteLine("Set resolution values to 96 dpi");
bmpImage.SetResolution(96.0, 96.0);
System.Console.WriteLine("The horizontal resolution, in pixels per inch: {0}", bmpImage.HorizontalResolution);
System.Console.WriteLine("The vertical resolution, in pixels per inch: {0}", bmpImage.VerticalResolution);
}
// The output may look like this:
// The horizontal resolution, in pixels per inch: 0
// The vertical resolution, in pixels per inch: 0
// Set resolution values to 96 dpi
// The horizontal resolution, in pixels per inch: 96.012
// The vertical resolution, in pixels per inch: 96.012
}Contoh berikut mendapatkan informasi umum tentang gambar termasuk format piksel, ukuran gambar, resolusi, kompresi, dll.
using (Aspose.Imaging.Image image = Aspose.Imaging.Image.Load(@"c:\temp\sample.bmp"))
{
Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = (Aspose.Imaging.FileFormats.Bmp.BmpImage)image;
System.Console.WriteLine("The pixel format: {0}", bmpImage.RawDataFormat);
System.Console.WriteLine("The raw line size in bytes: {0}", bmpImage.RawLineSize);
System.Console.WriteLine("The bitmap compression: {0}", bmpImage.Compression);
System.Console.WriteLine("The bitmap width: {0}", bmpImage.Width);
System.Console.WriteLine("The bitmap height: {0}", bmpImage.Height);
System.Console.WriteLine("The number of bits per pixel: {0}", bmpImage.BitsPerPixel);
double hres = bmpImage.HorizontalResolution;
double vres = bmpImage.VerticalResolution;
System.Console.WriteLine("The horizontal resolution, in pixels per inch: {0}", hres);
System.Console.WriteLine("The vertical resolution, in pixels per inch: {0}", vres);
if (hres != 96.0 || vres != 96.0)
{
// You may consider using the SetResolution method for updating both resolution values in single call.
System.Console.WriteLine("Set resolution values to 96 dpi");
bmpImage.SetResolution(96.0, 96.0);
System.Console.WriteLine("The horizontal resolution, in pixels per inch: {0}", bmpImage.HorizontalResolution);
System.Console.WriteLine("The vertical resolution, in pixels per inch: {0}", bmpImage.VerticalResolution);
}
//The output may look like this:
//The pixel format: Rgb24Bpp, used channels: 8,8,8
//The raw line size in bytes: 1500
//The bitmap compression: Rgb
//The bitmap width: 500
//The bitmap height: 375
//The number of bits per pixel: 24
//The horizontal resolution, in pixels per inch: 0
//The vertical resolution, in pixels per inch: 0
//Set resolution values to 96 dpi
//The horizontal resolution, in pixels per inch: 96.012
//The vertical resolution, in pixels per inch: 96.012
}Remarks
Catat secara default nilai ini selalu 96 karena platform yang berbeda tidak dapat mengembalikan resolusi layar. Anda dapat mempertimbangkan menggunakan metode SetResolution untuk memperbarui kedua nilai resolusi dalam satu panggilan.
RawDataFormat
Mudah mendapatkan format data mentah Anda dengan fitur yang ramah pengguna ini.Sempurna untuk pengembang yang ingin mengakses informasi penting tentang format data mereka dengan cepat.
public override PixelDataFormat RawDataFormat { get; }Nilai Properti
Examples
Contoh berikut menunjukkan bagaimana untuk mengekstrak informasi tentang format data mentah dan saluran alfa dari gambar BMP.
// Create a 32-bpp BMP image of 100 x 100 px.
using (Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = new Aspose.Imaging.FileFormats.Bmp.BmpImage(100, 100, 32, null))
{
System.Console.WriteLine("FileFormat={0}, RawDataFormat={1}, HasAlpha={2}", bmpImage.FileFormat, bmpImage.RawDataFormat, bmpImage.HasAlpha);
};
// Create a 24-bpp BMP image of 100 x 100 px.
using (Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = new Aspose.Imaging.FileFormats.Bmp.BmpImage(100, 100, 24, null))
{
System.Console.WriteLine("FileFormat={0}, RawDataFormat={1}, HasAlpha={2}", bmpImage.FileFormat, bmpImage.RawDataFormat, bmpImage.HasAlpha);
};
// Generally, BMP doesn't support alpha channel so the output will look like this:
// FileFormat = Bmp, RawDataFormat = Rgb32Bpp, used channels: 8,8,8,8, HasAlpha = False
// FileFormat = Bmp, RawDataFormat = Rgb24Bpp, used channels: 8,8,8, HasAlpha = FalseContoh berikut mendapatkan informasi umum tentang gambar termasuk format piksel, ukuran gambar, resolusi, kompresi, dll.
using (Aspose.Imaging.Image image = Aspose.Imaging.Image.Load(@"c:\temp\sample.bmp"))
{
Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = (Aspose.Imaging.FileFormats.Bmp.BmpImage)image;
System.Console.WriteLine("The pixel format: {0}", bmpImage.RawDataFormat);
System.Console.WriteLine("The raw line size in bytes: {0}", bmpImage.RawLineSize);
System.Console.WriteLine("The bitmap compression: {0}", bmpImage.Compression);
System.Console.WriteLine("The bitmap width: {0}", bmpImage.Width);
System.Console.WriteLine("The bitmap height: {0}", bmpImage.Height);
System.Console.WriteLine("The number of bits per pixel: {0}", bmpImage.BitsPerPixel);
double hres = bmpImage.HorizontalResolution;
double vres = bmpImage.VerticalResolution;
System.Console.WriteLine("The horizontal resolution, in pixels per inch: {0}", hres);
System.Console.WriteLine("The vertical resolution, in pixels per inch: {0}", vres);
if (hres != 96.0 || vres != 96.0)
{
// You may consider using the SetResolution method for updating both resolution values in single call.
System.Console.WriteLine("Set resolution values to 96 dpi");
bmpImage.SetResolution(96.0, 96.0);
System.Console.WriteLine("The horizontal resolution, in pixels per inch: {0}", bmpImage.HorizontalResolution);
System.Console.WriteLine("The vertical resolution, in pixels per inch: {0}", bmpImage.VerticalResolution);
}
//The output may look like this:
//The pixel format: Rgb24Bpp, used channels: 8,8,8
//The raw line size in bytes: 1500
//The bitmap compression: Rgb
//The bitmap width: 500
//The bitmap height: 375
//The number of bits per pixel: 24
//The horizontal resolution, in pixels per inch: 0
//The vertical resolution, in pixels per inch: 0
//Set resolution values to 96 dpi
//The horizontal resolution, in pixels per inch: 96.012
//The vertical resolution, in pixels per inch: 96.012
}RawLineSize
Cepat mengakses ukuran setiap garis mentah dalam byte dengan sifat sederhana ini.Ideal untuk pengembang yang perlu menangani data gambar mentah dengan efisien.
public override int RawLineSize { get; }Nilai Properti
Examples
Contoh berikut mendapatkan informasi umum tentang gambar termasuk format piksel, ukuran gambar, resolusi, kompresi, dll.
using (Aspose.Imaging.Image image = Aspose.Imaging.Image.Load(@"c:\temp\sample.bmp"))
{
Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = (Aspose.Imaging.FileFormats.Bmp.BmpImage)image;
System.Console.WriteLine("The pixel format: {0}", bmpImage.RawDataFormat);
System.Console.WriteLine("The raw line size in bytes: {0}", bmpImage.RawLineSize);
System.Console.WriteLine("The bitmap compression: {0}", bmpImage.Compression);
System.Console.WriteLine("The bitmap width: {0}", bmpImage.Width);
System.Console.WriteLine("The bitmap height: {0}", bmpImage.Height);
System.Console.WriteLine("The number of bits per pixel: {0}", bmpImage.BitsPerPixel);
double hres = bmpImage.HorizontalResolution;
double vres = bmpImage.VerticalResolution;
System.Console.WriteLine("The horizontal resolution, in pixels per inch: {0}", hres);
System.Console.WriteLine("The vertical resolution, in pixels per inch: {0}", vres);
if (hres != 96.0 || vres != 96.0)
{
// You may consider using the SetResolution method for updating both resolution values in single call.
System.Console.WriteLine("Set resolution values to 96 dpi");
bmpImage.SetResolution(96.0, 96.0);
System.Console.WriteLine("The horizontal resolution, in pixels per inch: {0}", bmpImage.HorizontalResolution);
System.Console.WriteLine("The vertical resolution, in pixels per inch: {0}", bmpImage.VerticalResolution);
}
//The output may look like this:
//The pixel format: Rgb24Bpp, used channels: 8,8,8
//The raw line size in bytes: 1500
//The bitmap compression: Rgb
//The bitmap width: 500
//The bitmap height: 375
//The number of bits per pixel: 24
//The horizontal resolution, in pixels per inch: 0
//The vertical resolution, in pixels per inch: 0
//Set resolution values to 96 dpi
//The horizontal resolution, in pixels per inch: 96.012
//The vertical resolution, in pixels per inch: 96.012
}Contoh berikut menunjukkan bagaimana kompresi bitmap mempengaruhi ukuran gambar output.
Aspose.Imaging.FileFormats.Bmp.BitmapCompression[] compressions = new Aspose.Imaging.FileFormats.Bmp.BitmapCompression[]
{
Aspose.Imaging.FileFormats.Bmp.BitmapCompression.Rgb,
Aspose.Imaging.FileFormats.Bmp.BitmapCompression.Rle8,
};
Aspose.Imaging.Color[] paletterColors = new Aspose.Imaging.Color[]
{
Aspose.Imaging.Color.Red,
Aspose.Imaging.Color.Green,
};
// Create a monochrome palette which contains only red and green colors.
Aspose.Imaging.IColorPalette palette = new Aspose.Imaging.ColorPalette(paletterColors);
foreach (Aspose.Imaging.FileFormats.Bmp.BitmapCompression compression in compressions)
{
// Create a 8-bpp BMP image of 100 x 100 px.
using (Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = new Aspose.Imaging.FileFormats.Bmp.BmpImage(100, 100, 8, palette, compression, 0.0, 0.0))
{
Aspose.Imaging.Graphics gr = new Aspose.Imaging.Graphics(bmpImage);
// Fill the entire image in red.
Aspose.Imaging.Brushes.SolidBrush redBrush = new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Red);
gr.FillRectangle(redBrush, bmpImage.Bounds);
// Save the image to a stream to get the output image size.
using (System.IO.MemoryStream stream = new System.IO.MemoryStream())
{
bmpImage.Save(stream);
System.Console.WriteLine("---------------------------------------------");
System.Console.WriteLine("The compression={0}", bmpImage.Compression);
System.Console.WriteLine("The number of bits per pixel={0}", bmpImage.BitsPerPixel);
System.Console.WriteLine("The image dimensions={0} x {1}", bmpImage.Width, bmpImage.Height);
System.Console.WriteLine("The raw line size={0}", bmpImage.RawLineSize);
System.Console.WriteLine("The output size in bytes={0}", stream.Length);
}
}
}
// The output looks like this:
// ---------------------------------------------
// The compression = Rgb
// The number of bits per pixel = 8
// The image dimensions = 100 x 100
// The raw line size = 100
// The output size in bytes = 11078
// ---------------------------------------------
// The compression = Rle8
// The number of bits per pixel = 8
// The image dimensions = 100 x 100
// The raw line size = 100
// The output size in bytes = 856VerticalResolution
Mudah mendapatkan atau menetapkan resolusi vertikal, diukur dalam piksel per inci,dari ini Aspose.Imaging.RasterImage objek dengan sifat ini. sempurna untuk pengembang yang memerlukanKontrol resolusi gambar yang akurat dalam aplikasi mereka.
public override double VerticalResolution { get; set; }Nilai Properti
Examples
Contoh berikut menunjukkan bagaimana menetapkan resolusi horizontal/vertikal dari gambar BMP.
string dir = "c:\\temp\\";
using (Aspose.Imaging.Image image = Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = (Aspose.Imaging.FileFormats.Bmp.BmpImage)image;
// Get horizontal and vertical resolution of the BmpImage
double horizontalResolution = bmpImage.HorizontalResolution;
double verticalResolution = bmpImage.VerticalResolution;
System.Console.WriteLine("The horizontal resolution, in pixels per inch: {0}", horizontalResolution);
System.Console.WriteLine("The vertical resolution, in pixels per inch: {0}", verticalResolution);
if (horizontalResolution != 96.0 || verticalResolution != 96.0)
{
// Use the SetResolution method for updating both resolution values in a single call.
System.Console.WriteLine("Set resolution values to 96 dpi");
bmpImage.SetResolution(96.0, 96.0);
System.Console.WriteLine("The horizontal resolution, in pixels per inch: {0}", bmpImage.HorizontalResolution);
System.Console.WriteLine("The vertical resolution, in pixels per inch: {0}", bmpImage.VerticalResolution);
}
// The output may look like this:
// The horizontal resolution, in pixels per inch: 0
// The vertical resolution, in pixels per inch: 0
// Set resolution values to 96 dpi
// The horizontal resolution, in pixels per inch: 96.012
// The vertical resolution, in pixels per inch: 96.012
}Contoh berikut mendapatkan informasi umum tentang gambar termasuk format piksel, ukuran gambar, resolusi, kompresi, dll.
using (Aspose.Imaging.Image image = Aspose.Imaging.Image.Load(@"c:\temp\sample.bmp"))
{
Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = (Aspose.Imaging.FileFormats.Bmp.BmpImage)image;
System.Console.WriteLine("The pixel format: {0}", bmpImage.RawDataFormat);
System.Console.WriteLine("The raw line size in bytes: {0}", bmpImage.RawLineSize);
System.Console.WriteLine("The bitmap compression: {0}", bmpImage.Compression);
System.Console.WriteLine("The bitmap width: {0}", bmpImage.Width);
System.Console.WriteLine("The bitmap height: {0}", bmpImage.Height);
System.Console.WriteLine("The number of bits per pixel: {0}", bmpImage.BitsPerPixel);
double hres = bmpImage.HorizontalResolution;
double vres = bmpImage.VerticalResolution;
System.Console.WriteLine("The horizontal resolution, in pixels per inch: {0}", hres);
System.Console.WriteLine("The vertical resolution, in pixels per inch: {0}", vres);
if (hres != 96.0 || vres != 96.0)
{
// You may consider using the SetResolution method for updating both resolution values in single call.
System.Console.WriteLine("Set resolution values to 96 dpi");
bmpImage.SetResolution(96.0, 96.0);
System.Console.WriteLine("The horizontal resolution, in pixels per inch: {0}", bmpImage.HorizontalResolution);
System.Console.WriteLine("The vertical resolution, in pixels per inch: {0}", bmpImage.VerticalResolution);
}
//The output may look like this:
//The pixel format: Rgb24Bpp, used channels: 8,8,8
//The raw line size in bytes: 1500
//The bitmap compression: Rgb
//The bitmap width: 500
//The bitmap height: 375
//The number of bits per pixel: 24
//The horizontal resolution, in pixels per inch: 0
//The vertical resolution, in pixels per inch: 0
//Set resolution values to 96 dpi
//The horizontal resolution, in pixels per inch: 96.012
//The vertical resolution, in pixels per inch: 96.012
}Remarks
Catat secara default nilai ini selalu 96 karena platform yang berbeda tidak dapat mengembalikan resolusi layar. Anda dapat mempertimbangkan menggunakan metode SetResolution untuk memperbarui kedua nilai resolusi dalam satu panggilan.
Width
Akses lebar gambar dengan mudah dengan properti ini. ideal untuk pengembangMencari informasi cepat tentang dimensi gambar.
public override int Width { get; }Nilai Properti
Examples
Contoh berikut mendapatkan informasi umum tentang gambar termasuk format piksel, ukuran gambar, resolusi, kompresi, dll.
using (Aspose.Imaging.Image image = Aspose.Imaging.Image.Load(@"c:\temp\sample.bmp"))
{
Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = (Aspose.Imaging.FileFormats.Bmp.BmpImage)image;
System.Console.WriteLine("The pixel format: {0}", bmpImage.RawDataFormat);
System.Console.WriteLine("The raw line size in bytes: {0}", bmpImage.RawLineSize);
System.Console.WriteLine("The bitmap compression: {0}", bmpImage.Compression);
System.Console.WriteLine("The bitmap width: {0}", bmpImage.Width);
System.Console.WriteLine("The bitmap height: {0}", bmpImage.Height);
System.Console.WriteLine("The number of bits per pixel: {0}", bmpImage.BitsPerPixel);
double hres = bmpImage.HorizontalResolution;
double vres = bmpImage.VerticalResolution;
System.Console.WriteLine("The horizontal resolution, in pixels per inch: {0}", hres);
System.Console.WriteLine("The vertical resolution, in pixels per inch: {0}", vres);
if (hres != 96.0 || vres != 96.0)
{
// You may consider using the SetResolution method for updating both resolution values in single call.
System.Console.WriteLine("Set resolution values to 96 dpi");
bmpImage.SetResolution(96.0, 96.0);
System.Console.WriteLine("The horizontal resolution, in pixels per inch: {0}", bmpImage.HorizontalResolution);
System.Console.WriteLine("The vertical resolution, in pixels per inch: {0}", bmpImage.VerticalResolution);
}
//The output may look like this:
//The pixel format: Rgb24Bpp, used channels: 8,8,8
//The raw line size in bytes: 1500
//The bitmap compression: Rgb
//The bitmap width: 500
//The bitmap height: 375
//The number of bits per pixel: 24
//The horizontal resolution, in pixels per inch: 0
//The vertical resolution, in pixels per inch: 0
//Set resolution values to 96 dpi
//The horizontal resolution, in pixels per inch: 96.012
//The vertical resolution, in pixels per inch: 96.012
}Contoh berikut menunjukkan bagaimana kompresi bitmap mempengaruhi ukuran gambar output.
Aspose.Imaging.FileFormats.Bmp.BitmapCompression[] compressions = new Aspose.Imaging.FileFormats.Bmp.BitmapCompression[]
{
Aspose.Imaging.FileFormats.Bmp.BitmapCompression.Rgb,
Aspose.Imaging.FileFormats.Bmp.BitmapCompression.Rle8,
};
Aspose.Imaging.Color[] paletterColors = new Aspose.Imaging.Color[]
{
Aspose.Imaging.Color.Red,
Aspose.Imaging.Color.Green,
};
// Create a monochrome palette which contains only red and green colors.
Aspose.Imaging.IColorPalette palette = new Aspose.Imaging.ColorPalette(paletterColors);
foreach (Aspose.Imaging.FileFormats.Bmp.BitmapCompression compression in compressions)
{
// Create a 8-bpp BMP image of 100 x 100 px.
using (Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = new Aspose.Imaging.FileFormats.Bmp.BmpImage(100, 100, 8, palette, compression, 0.0, 0.0))
{
Aspose.Imaging.Graphics gr = new Aspose.Imaging.Graphics(bmpImage);
// Fill the entire image in red.
Aspose.Imaging.Brushes.SolidBrush redBrush = new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Red);
gr.FillRectangle(redBrush, bmpImage.Bounds);
// Save the image to a stream to get the output image size.
using (System.IO.MemoryStream stream = new System.IO.MemoryStream())
{
bmpImage.Save(stream);
System.Console.WriteLine("---------------------------------------------");
System.Console.WriteLine("The compression={0}", bmpImage.Compression);
System.Console.WriteLine("The number of bits per pixel={0}", bmpImage.BitsPerPixel);
System.Console.WriteLine("The image dimensions={0} x {1}", bmpImage.Width, bmpImage.Height);
System.Console.WriteLine("The raw line size={0}", bmpImage.RawLineSize);
System.Console.WriteLine("The output size in bytes={0}", stream.Length);
}
}
}
// The output looks like this:
// ---------------------------------------------
// The compression = Rgb
// The number of bits per pixel = 8
// The image dimensions = 100 x 100
// The raw line size = 100
// The output size in bytes = 11078
// ---------------------------------------------
// The compression = Rle8
// The number of bits per pixel = 8
// The image dimensions = 100 x 100
// The raw line size = 100
// The output size in bytes = 856Methods
GetDefaultOptions(objek[])
Kembalikan opsi default dengan mudah dengan metode sederhana ini.Ideal untuk pengembang yang mencari akses cepat ke pengaturan gambar default atau konfigurasi.
public override ImageOptionsBase GetDefaultOptions(object[] args)Parameters
args object
[ ]
dengan argumen tersebut.
Returns
Pilihan default
OnCached()
Dikatakan ketika data tersembunyi dan semua sumber daya yang terkait dapat dialihkan.
protected override void OnCached()OnPaletteChanging(Perbedaannya dengan IColorPalette)
Ia dipanggil ketika palet berubah.
protected override void OnPaletteChanging(IColorPalette oldPalette, IColorPalette newPalette)Parameters
oldPalette IColorPalette
dengan palet lama.
newPalette IColorPalette
dan palet baru.
SaveData(Stream)
Simpan data tersebut.
protected override void SaveData(Stream stream)Parameters
stream Stream
Aliran untuk menyimpan data ke.
SetResolution(Double dan Double)
Mengatur resolusi Aspose.Imaging.RasterImage dengan mudah dengan iniMetode yang ramah pengguna. sempurna untuk pengembang yang mencari kontrol yang tepat atasResolusi gambar dalam aplikasi mereka.
public override void SetResolution(double dpiX, double dpiY)Parameters
dpiX double
Resolusi horizontal, dalam titik per inci, dari Aspose.Imaging.RasterImage.
dpiY double
Resolusi vertikal, dalam titik per inci, dari Aspose.Imaging.RasterImage.
Examples
Contoh berikut menunjukkan bagaimana menetapkan resolusi horizontal/vertikal dari gambar BMP.
string dir = "c:\\temp\\";
using (Aspose.Imaging.Image image = Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = (Aspose.Imaging.FileFormats.Bmp.BmpImage)image;
// Get horizontal and vertical resolution of the BmpImage
double horizontalResolution = bmpImage.HorizontalResolution;
double verticalResolution = bmpImage.VerticalResolution;
System.Console.WriteLine("The horizontal resolution, in pixels per inch: {0}", horizontalResolution);
System.Console.WriteLine("The vertical resolution, in pixels per inch: {0}", verticalResolution);
if (horizontalResolution != 96.0 || verticalResolution != 96.0)
{
// Use the SetResolution method for updating both resolution values in a single call.
System.Console.WriteLine("Set resolution values to 96 dpi");
bmpImage.SetResolution(96.0, 96.0);
System.Console.WriteLine("The horizontal resolution, in pixels per inch: {0}", bmpImage.HorizontalResolution);
System.Console.WriteLine("The vertical resolution, in pixels per inch: {0}", bmpImage.VerticalResolution);
}
// The output may look like this:
// The horizontal resolution, in pixels per inch: 0
// The vertical resolution, in pixels per inch: 0
// Set resolution values to 96 dpi
// The horizontal resolution, in pixels per inch: 96.012
// The vertical resolution, in pixels per inch: 96.012
}Contoh berikut mendapatkan informasi umum tentang gambar termasuk format piksel, ukuran gambar, resolusi, kompresi, dll.
using (Aspose.Imaging.Image image = Aspose.Imaging.Image.Load(@"c:\temp\sample.bmp"))
{
Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = (Aspose.Imaging.FileFormats.Bmp.BmpImage)image;
System.Console.WriteLine("The pixel format: {0}", bmpImage.RawDataFormat);
System.Console.WriteLine("The raw line size in bytes: {0}", bmpImage.RawLineSize);
System.Console.WriteLine("The bitmap compression: {0}", bmpImage.Compression);
System.Console.WriteLine("The bitmap width: {0}", bmpImage.Width);
System.Console.WriteLine("The bitmap height: {0}", bmpImage.Height);
System.Console.WriteLine("The number of bits per pixel: {0}", bmpImage.BitsPerPixel);
double hres = bmpImage.HorizontalResolution;
double vres = bmpImage.VerticalResolution;
System.Console.WriteLine("The horizontal resolution, in pixels per inch: {0}", hres);
System.Console.WriteLine("The vertical resolution, in pixels per inch: {0}", vres);
if (hres != 96.0 || vres != 96.0)
{
// You may consider using the SetResolution method for updating both resolution values in single call.
System.Console.WriteLine("Set resolution values to 96 dpi");
bmpImage.SetResolution(96.0, 96.0);
System.Console.WriteLine("The horizontal resolution, in pixels per inch: {0}", bmpImage.HorizontalResolution);
System.Console.WriteLine("The vertical resolution, in pixels per inch: {0}", bmpImage.VerticalResolution);
}
//The output may look like this:
//The pixel format: Rgb24Bpp, used channels: 8,8,8
//The raw line size in bytes: 1500
//The bitmap compression: Rgb
//The bitmap width: 500
//The bitmap height: 375
//The number of bits per pixel: 24
//The horizontal resolution, in pixels per inch: 0
//The vertical resolution, in pixels per inch: 0
//Set resolution values to 96 dpi
//The horizontal resolution, in pixels per inch: 96.012
//The vertical resolution, in pixels per inch: 96.012
}ToBitmap()
Mudah mengubah gambar raster Anda menjadi bitmap dengan metode sederhana ini.Sempurna untuk pengembang yang membutuhkan peralihan tanpa batas antara format gambar yang berbeda.
public override Bitmap ToBitmap()Returns
dan bitmap
Examples
Contoh berikut mengubah gambar BMP menjadi bitmap GDI.
using (Aspose.Imaging.Image image = Aspose.Imaging.Image.Load(@"c:\temp\sample.bmp"))
{
Aspose.Imaging.FileFormats.Bmp.BmpImage bmpImage = (Aspose.Imaging.FileFormats.Bmp.BmpImage)image;
System.Drawing.Bitmap bitmap = bmpImage.ToBitmap();
// Process the GDI bitmap.
}UpdateDimensions(dengan int, int)
Mengemas kini dimensi gambar.
protected override void UpdateDimensions(int newWidth, int newHeight)Parameters
newWidth int
Gambar baru yang luas.
newHeight int
Ketinggian gambar baru.
