Class SvgGraphics2D
Class SvgGraphics2D
Nazwa przestrzeń: Aspose.Imaging.FileFormats.Svg.Graphics Zgromadzenie: Aspose.Imaging.dll (25.4.0)
Zapewnia rysowanie komend do tworzenia obrazu Svg.
public class SvgGraphics2DInheritance
Dziedziczeni członkowie
object.GetType() , object.MemberwiseClone() , object.ToString() , object.Equals(object?) , object.Equals(object?, object?) , object.ReferenceEquals(object?, object?) , object.GetHashCode()
Constructors
Grafika2D(Int , int , int , int)
Inicjalizuje nową instancję klasy Aspose.Imaging.FileFormats.Svg.Graphics.D.
public SvgGraphics2D(int width, int height, int dpi)Parameters
width int
Szerokość obrazu wyjściowego Svg.
height int
Szerokość obrazu wyjściowego Svg.
dpi int
Rozdzielczość urządzenia, np. 96 punktów na cala.
Examples
Ten przykład pokazuje, jak utworzyć obraz SVG określonego rozmiaru i rasterizować go do PNG.
string dir = "c:\\temp\\";
int imageWidth = 100;
int imageHeight = 100;
int dpi = 96;
// Create an SVG image of 100x100 px.
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
Aspose.Imaging.Pen pen = new Aspose.Imaging.Pen(Aspose.Imaging.Color.Yellow, 10);
Aspose.Imaging.Brushes.SolidBrush brush = new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Red);
// Fill the entire image in red.
// Draw a yellow rectangle of 10px wide along the image boundaries.
graphics.FillRectangle(pen, brush, 0, 0, imageWidth, imageHeight);
// Get the final Svg image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}Ten przykład pokazuje, jak utworzyć obraz SVG określonego rozmiaru i rysować na nim różne kształty za pomocą SvgGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}Grafika2D(SvgImage)
Inicjalizuje nową instancję klasy Aspose.Imaging.FileFormats.Svg.Graphics.D.
public SvgGraphics2D(SvgImage image)Parameters
image SvgImage
Zdjęcie do wykonania operacji rysowania.
Methods
DrawArc(Pen, rektangle, float, float)
Wyciąga arkę reprezentującą część elipsy określonej przez strukturę Rectangle.
public void DrawArc(Pen pen, Rectangle rect, float startAngle, float arcAngle)Parameters
pen Pen
Pióro do wyciągania podsumowania figury.
rect Rectangle
granice elipsów.
startAngle float
Węgiel w stopniach mierzy się w sposób zegarowy od osi x do punktu wyjścia arki.
arcAngle float
Węgiel w stopniach mierzy się w sposób zegarkowy od parametru StartAngle do punktu końcowego arki.
Examples
Ten przykład pokazuje, jak utworzyć obraz SVG określonego rozmiaru i rysować na nim różne kształty za pomocą SvgGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}DrawCubicBezier(Pieniądze: PointF, PointF, PointF)
Wyciągnij kubik bezier.
public void DrawCubicBezier(Pen pen, PointF pt1, PointF pt2, PointF pt3, PointF pt4)Parameters
pen Pen
Pióro, które określa kolor, szerokość i styl figury.
pt1 PointF
Punkt wyjścia kurwy.
pt2 PointF
Pierwszy punkt kontrolny dla kurwy.
pt3 PointF
Drugi punkt kontrolny dla kurwy.
pt4 PointF
punkt końcowy kurwy.
Examples
Ten przykład pokazuje, jak utworzyć obraz SVG określonego rozmiaru i rysować na nim różne kształty za pomocą SvgGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}DrawImage(Zwiastun, punkt)
Wyświetl określone zdjęcie w określonym miejscu.
public void DrawImage(RasterImage image, Point origin)Parameters
image RasterImage
Zdjęcie wyciągnięte.
origin Point
Lokalizacja wyciągniętego obrazu.
DrawImage(RasterImage, punkt, rozmiar)
Wyświetla wyznaczony obraz określonego rozmiaru w określonej lokalizacji.
public void DrawImage(RasterImage image, Point origin, Size size)Parameters
image RasterImage
Zdjęcie wyciągnięte.
origin Point
Lokalizacja wyciągniętego obrazu.
size Size
Pożądany rozmiar obrazu.
Examples
Ten przykład pokazuje, jak utworzyć obraz SVG określonego rozmiaru i rysować na nim różne kształty za pomocą SvgGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}DrawImage(Rectangle, RasterImage, Rozwiązanie)
Wyciąga określona część wyświetlanego obrazu w określonym miejscu i przy określającym rozmiarze.
public void DrawImage(Rectangle srcRect, Rectangle destRect, RasterImage image)Parameters
srcRect Rectangle
Część obrazu przedmiot do rysowania.
destRect Rectangle
Lokalizacja i rozmiar wyciągniętego obrazu. obraz jest skaliowany, aby dopasować się do prawicy.
image RasterImage
Zdjęcie do rysowania.
DrawLine(Pieniądze, int, int, int, int)
Wyciągnij linię.
public void DrawLine(Pen pen, int x1, int y1, int x2, int y2)Parameters
pen Pen
Pióro, które określa kolor, szerokość i styl figury.
x1 int
Koordynacja x w pierwszym punkcie.
y1 int
Koordynacja w pierwszym punkcie.
x2 int
Koordynacja X w drugim punkcie.
y2 int
Koordynacja w drugim punkcie.
Examples
Ten przykład pokazuje, jak utworzyć obraz SVG określonego rozmiaru i rysować na nim różne kształty za pomocą SvgGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}DrawPath(Pióro, GraphicsPath)
Przeprowadź drogę.
public void DrawPath(Pen pen, GraphicsPath path)Parameters
pen Pen
Pióro do wyciągania podsumowania figury.
path GraphicsPath
Droga do wyciągnięcia.
Examples
Ten przykład pokazuje, jak utworzyć obraz SVG określonego rozmiaru i rysować na nim różne kształty za pomocą SvgGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}DrawRectangle(Pieniądze, int, int, int, int)
Wyciągnij rektangulę.
public void DrawRectangle(Pen pen, int x, int y, int width, int height)Parameters
pen Pen
Pióro do wyciągania podsumowania figury.
x int
X-koordynacja górnego lewego rogu rektaku do wyciągania.
y int
Y-koordynacja górnego lewego rogu rektanu do wyciągnięcia.
width int
Szerokość rektaku do wyciągnięcia.
height int
Wysokość rektaku do wyciągnięcia.
Examples
Ten przykład pokazuje, jak utworzyć obraz SVG określonego rozmiaru i rysować na nim różne kształty za pomocą SvgGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}DrawString(Źródło, strumień, punkt, kolor)
Wyciągnij strzałkę tekstową.
public void DrawString(Font font, string text, Point origin, Color textColor)Parameters
font Font
Wykorzystywany jest do przekazywania tekstu.
text string
Unicode String tekstowy.
origin Point
W lewym górnym rogu tekstu.
textColor Color
W kolorze tekstu.
Examples
Ten przykład pokazuje, jak utworzyć obraz SVG określonego rozmiaru i rysować na nim różne kształty za pomocą SvgGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}EndRecording()
Otrzymuje ostatni obraz Svg, który obejmuje wszystkie polecenia rysowania wykonane za pośrednictwem obiektu Aspose.Imaging.FileFormats.Svg.Graphics.
public SvgImage EndRecording()Returns
Ostatnie zdjęcie Svg.
Examples
Ten przykład pokazuje, jak utworzyć obraz SVG określonego rozmiaru i rysować na nim różne kształty za pomocą SvgGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}FillArc(Pióro, Brush, Rectangle, Float, float)
Wypełnia arkę reprezentującą część elipsy określonej przez strukturę Rectangle.
public void FillArc(Pen pen, Brush brush, Rectangle rect, float startAngle, float arcAngle)Parameters
pen Pen
Pióro do wyciągania podsumowania figury.
brush Brush
Płytka do wypełnienia wnętrza figury.
rect Rectangle
granice elipsów.
startAngle float
Węgiel w stopniach mierzy się w sposób zegarowy od osi x do punktu wyjścia arki.
arcAngle float
Węgiel w stopniach mierzy się w sposób zegarkowy od parametru StartAngle do punktu końcowego arki.
Examples
Ten przykład pokazuje, jak utworzyć obraz SVG określonego rozmiaru i rysować na nim różne kształty za pomocą SvgGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}FillPath(Pióro, Brush, GrafikaPath)
Wypełniają ścieżkę.
public void FillPath(Pen pen, Brush brush, GraphicsPath path)Parameters
pen Pen
Pióro do wyciągania podsumowania figury.
brush Brush
Płytka do wypełnienia wnętrza figury.
path GraphicsPath
Droga do wyciągnięcia.
Examples
Ten przykład pokazuje, jak utworzyć obraz SVG określonego rozmiaru i rysować na nim różne kształty za pomocą SvgGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}FillRectangle(Pióro, Brush, Int, int i int)
Wypełnić rektangulę.
public void FillRectangle(Pen pen, Brush brush, int x, int y, int width, int height)Parameters
pen Pen
Pióro do wyciągania podsumowania figury.
brush Brush
Płytka do wypełnienia wnętrza figury.
x int
X-koordynacja górnego lewego rogu rektaku do wyciągania.
y int
Y-koordynacja górnego lewego rogu rektanu do wyciągnięcia.
width int
Szerokość rektaku do wyciągnięcia.
height int
Wysokość rektaku do wyciągnięcia.
Examples
Ten przykład pokazuje, jak utworzyć obraz SVG określonego rozmiaru i rysować na nim różne kształty za pomocą SvgGraphics2D.
string dir = "c:\\temp\\";
int imageWidth = 600;
int imageHeight = 400;
int dpi = 96;
Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D graphics = new Aspose.Imaging.FileFormats.Svg.Graphics.SvgGraphics2D(imageWidth, imageHeight, dpi);
// Draw a black rectangle along the image borders using a 1-pixel-wide black pen.
graphics.DrawRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Black, 1), 0, 0, imageWidth, imageHeight);
// Fill a rectangle with the color of white-smoke.
graphics.FillRectangle(new Aspose.Imaging.Pen(Aspose.Imaging.Color.WhiteSmoke, 1), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.WhiteSmoke), 10, 10, 580, 380);
// Draw two diagonal lines using a 1-pixel-wide darkgreen pen.
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, 0, imageWidth, imageHeight);
graphics.DrawLine(new Aspose.Imaging.Pen(Aspose.Imaging.Color.DarkGreen, 1), 0, imageHeight, imageWidth, 0);
// Draw an arc within the rectangle {0, 0, 200, 200} using a 2-pixel-wide blue pen.
graphics.DrawArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Blue, 2), new Aspose.Imaging.Rectangle(0, 0, 200, 200), 90, 270);
// Fill an arc
graphics.FillArc(new Aspose.Imaging.Pen(Aspose.Imaging.Color.LightCoral, 10), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.LightSkyBlue), new Aspose.Imaging.Rectangle(0, 0, 150, 150), 90, 270);
// Draw a cubic bezier using a 2-pixel-wide red pen.
graphics.DrawCubicBezier(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Red, 2),
new Aspose.Imaging.PointF(0, 0),
new Aspose.Imaging.PointF(200, 133),
new Aspose.Imaging.PointF(400, 166),
new Aspose.Imaging.PointF(600, 400));
// Draw a raster image of the specified size at the specified location.
// The image is scaled to fit the desired rectangle.
using (Aspose.Imaging.RasterImage imageToDraw = (Aspose.Imaging.RasterImage)Aspose.Imaging.Image.Load(dir + "sample.bmp"))
{
graphics.DrawImage(imageToDraw, new Aspose.Imaging.Point(400, 200), new Aspose.Imaging.Size(100, 50));
}
// Draw a text string
graphics.DrawString(new Aspose.Imaging.Font("Arial", 48, Aspose.Imaging.FontStyle.Regular), "Hello World!", new Aspose.Imaging.Point(200, 300), Aspose.Imaging.Color.DarkRed);
// Create a path to fill
Aspose.Imaging.Figure figureToFill = new Aspose.Imaging.Figure();
figureToFill.IsClosed = true;
Aspose.Imaging.GraphicsPath pathToFill = new Aspose.Imaging.GraphicsPath();
pathToFill.AddFigure(figureToFill);
figureToFill.AddShapes(new Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.Rectangle(400, 0, 200, 100), 45, 300),
new Aspose.Imaging.Shapes.BezierShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 200),
new Aspose.Imaging.PointF(400, 200),
new Aspose.Imaging.PointF(500, 100),
new Aspose.Imaging.PointF(600, 200),
}),
new Aspose.Imaging.Shapes.PolygonShape(
new Aspose.Imaging.PointF[]
{
new Aspose.Imaging.PointF(300, 100),
}),
new Aspose.Imaging.Shapes.RectangleShape(new Aspose.Imaging.RectangleF(0, 100, 200, 200)),
});
// Fill the path using a yellow brush and a green pen to draw outline
graphics.FillPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Green, 2), new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.Yellow), pathToFill);
// Create a path to draw
Aspose.Imaging.GraphicsPath pathToDraw = new Aspose.Imaging.GraphicsPath();
Aspose.Imaging.Figure figureToDraw = new Aspose.Imaging.Figure();
pathToDraw.AddFigure(figureToDraw);
figureToDraw.AddShapes(new Aspose.Imaging.Shape[]
{
new Aspose.Imaging.Shapes.ArcShape(new Aspose.Imaging.RectangleF(200, 200, 200, 200), 0, 360),
});
// Draw the path using a 5-pixel-wide orange pen.
graphics.DrawPath(new Aspose.Imaging.Pen(Aspose.Imaging.Color.Orange, 5), pathToDraw);
// Get the final SVG image which includes all drawing commands
using (Aspose.Imaging.FileFormats.Svg.SvgImage svgImage = graphics.EndRecording())
{
svgImage.Save(dir + "test.output.svg");
}
