Class TiffFrame
Namn på plats: Aspose.Imaging.FileFormats.Tiff Församling: Aspose.Imaging.dll (25.4.0)
och tiff frame.
[JsonObject(MemberSerialization.OptIn)]
public sealed class TiffFrame : RasterCachedImage, IDisposable, IObjectWithBounds, IRasterImageArgb32PixelLoader, IRasterImageRawDataLoader, IHasExifData, IHasXmpData, IHasMetadataInheritance
object ← DisposableObject ← DataStreamSupporter ← Image ← RasterImage ← RasterCachedImage ← TiffFrame
Implements
IDisposable , IObjectWithBounds , IRasterImageArgb32PixelLoader , IRasterImageRawDataLoader , IHasExifData , IHasXmpData , IHasMetadata
Arvsmedlemmar
RasterCachedImage.CacheData() , RasterCachedImage.Blend(Point, RasterImage, Rectangle, byte) , RasterCachedImage.Resize(int, int, ResizeType) , RasterCachedImage.Resize(int, int, ImageResizeSettings) , RasterCachedImage.RotateFlip(RotateFlipType) , RasterCachedImage.Rotate(float, bool, Color) , RasterCachedImage.Crop(Rectangle) , RasterCachedImage.Dither(DitheringMethod, int, IColorPalette) , RasterCachedImage.Grayscale() , RasterCachedImage.NormalizeHistogram() , RasterCachedImage.BinarizeFixed(byte) , RasterCachedImage.BinarizeOtsu() , RasterCachedImage.BinarizeBradley(double, int) , RasterCachedImage.BinarizeBradley(double) , RasterCachedImage.AdjustBrightness(int) , RasterCachedImage.AdjustContrast(float) , RasterCachedImage.AdjustGamma(float, float, float) , RasterCachedImage.AdjustGamma(float) , RasterCachedImage.IsCached , RasterImage.RemoveMetadata() , RasterImage.Save(Stream, ImageOptionsBase, Rectangle) , RasterImage.GetModifyDate(bool) , RasterImage.Dither(DitheringMethod, int) , RasterImage.Dither(DitheringMethod, int, IColorPalette) , RasterImage.GetDefaultPixels(Rectangle, IPartialArgb32PixelLoader) , RasterImage.GetDefaultRawData(Rectangle, IPartialRawDataLoader, RawDataSettings) , RasterImage.GetDefaultArgb32Pixels(Rectangle) , RasterImage.GetDefaultRawData(Rectangle, RawDataSettings) , RasterImage.GetArgb32Pixel(int, int) , RasterImage.GetPixel(int, int) , RasterImage.SetArgb32Pixel(int, int, int) , RasterImage.SetPixel(int, int, Color) , RasterImage.ReadScanLine(int) , RasterImage.ReadArgb32ScanLine(int) , RasterImage.WriteScanLine(int, Color[]) , RasterImage.WriteArgb32ScanLine(int, int[]) , RasterImage.LoadPartialArgb32Pixels(Rectangle, IPartialArgb32PixelLoader) , RasterImage.LoadPartialPixels(Rectangle, IPartialPixelLoader) , RasterImage.LoadArgb32Pixels(Rectangle) , RasterImage.LoadArgb64Pixels(Rectangle) , RasterImage.LoadPartialArgb64Pixels(Rectangle, IPartialArgb64PixelLoader) , RasterImage.LoadPixels(Rectangle) , RasterImage.LoadCmykPixels(Rectangle) , RasterImage.LoadCmyk32Pixels(Rectangle) , RasterImage.LoadRawData(Rectangle, RawDataSettings, IPartialRawDataLoader) , RasterImage.LoadRawData(Rectangle, Rectangle, RawDataSettings, IPartialRawDataLoader) , RasterImage.SaveRawData(byte[], int, Rectangle, RawDataSettings) , RasterImage.SaveArgb32Pixels(Rectangle, int[]) , RasterImage.SavePixels(Rectangle, Color[]) , RasterImage.SaveCmykPixels(Rectangle, CmykColor[]) , RasterImage.SaveCmyk32Pixels(Rectangle, int[]) , RasterImage.SetResolution(double, double) , RasterImage.SetPalette(IColorPalette, bool) , RasterImage.Resize(int, int, ImageResizeSettings) , RasterImage.Rotate(float, bool, Color) , RasterImage.Rotate(float) , RasterImage.BinarizeFixed(byte) , RasterImage.BinarizeOtsu() , RasterImage.BinarizeBradley(double) , RasterImage.BinarizeBradley(double, int) , RasterImage.Blend(Point, RasterImage, Rectangle, byte) , RasterImage.Blend(Point, RasterImage, byte) , RasterImage.Grayscale() , RasterImage.NormalizeHistogram() , RasterImage.AdjustBrightness(int) , RasterImage.AdjustContrast(float) , RasterImage.AdjustGamma(float, float, float) , RasterImage.AdjustGamma(float) , RasterImage.GetSkewAngle() , RasterImage.NormalizeAngle() , RasterImage.NormalizeAngle(bool, Color) , RasterImage.Filter(Rectangle, FilterOptionsBase) , RasterImage.ReplaceColor(Color, byte, Color) , RasterImage.ReplaceColor(int, byte, int) , RasterImage.ReplaceNonTransparentColors(Color) , RasterImage.ReplaceNonTransparentColors(int) , RasterImage.ToBitmap() , RasterImage.PremultiplyComponents , RasterImage.UseRawData , RasterImage.UpdateXmpData , RasterImage.XmpData , RasterImage.RawIndexedColorConverter , RasterImage.RawCustomColorConverter , RasterImage.RawFallbackIndex , RasterImage.RawDataSettings , RasterImage.UsePalette , RasterImage.RawDataFormat , RasterImage.RawLineSize , RasterImage.IsRawDataAvailable , RasterImage.HorizontalResolution , RasterImage.VerticalResolution , RasterImage.HasTransparentColor , RasterImage.HasAlpha , RasterImage.TransparentColor , RasterImage.ImageOpacity , Image.CanLoad(string) , Image.CanLoad(string, LoadOptions) , Image.CanLoad(Stream) , Image.CanLoad(Stream, LoadOptions) , Image.Create(ImageOptionsBase, int, int) , Image.Create(Image[]) , Image.Create(MultipageCreateOptions) , Image.Create(string[], bool) , Image.Create(string[]) , Image.Create(Image[], bool) , Image.GetFileFormat(string) , Image.GetFileFormat(Stream) , Image.GetFittingRectangle(Rectangle, int, int) , Image.GetFittingRectangle(Rectangle, int[], int, int) , Image.Load(string, LoadOptions) , Image.Load(string) , Image.Load(Stream, LoadOptions) , Image.Load(Stream) , Image.GetProportionalWidth(int, int, int) , Image.GetProportionalHeight(int, int, int) , Image.RemoveMetadata() , Image.CanSave(ImageOptionsBase) , Image.Resize(int, int) , Image.Resize(int, int, ResizeType) , Image.Resize(int, int, ImageResizeSettings) , Image.GetDefaultOptions(object[]) , Image.GetOriginalOptions() , Image.ResizeWidthProportionally(int) , Image.ResizeHeightProportionally(int) , Image.ResizeWidthProportionally(int, ResizeType) , Image.ResizeHeightProportionally(int, ResizeType) , Image.ResizeWidthProportionally(int, ImageResizeSettings) , Image.ResizeHeightProportionally(int, ImageResizeSettings) , Image.RotateFlip(RotateFlipType) , Image.Rotate(float) , Image.Crop(Rectangle) , Image.Crop(int, int, int, int) , Image.Save() , Image.Save(string) , Image.Save(string, ImageOptionsBase) , Image.Save(string, ImageOptionsBase, Rectangle) , Image.Save(Stream, ImageOptionsBase) , Image.Save(Stream, ImageOptionsBase, Rectangle) , Image.GetSerializedStream(ImageOptionsBase, Rectangle, out int) , Image.SetPalette(IColorPalette, bool) , Image.BitsPerPixel , Image.Bounds , Image.Container , Image.Height , Image.Palette , Image.UsePalette , Image.Size , Image.Width , Image.InterruptMonitor , Image.BufferSizeHint , Image.AutoAdjustPalette , Image.HasBackgroundColor , Image.FileFormat , Image.BackgroundColor , DataStreamSupporter.CacheData() , DataStreamSupporter.Save() , DataStreamSupporter.Save(Stream) , DataStreamSupporter.Save(string) , DataStreamSupporter.Save(string, bool) , DataStreamSupporter.DataStreamContainer , DataStreamSupporter.IsCached , DisposableObject.Dispose() , DisposableObject.Disposed , object.GetType() , object.ToString() , object.Equals(object?) , object.Equals(object?, object?) , object.ReferenceEquals(object?, object?) , object.GetHashCode()
Examples
Det här exemplet visar hur man skapar en TIFF-bild från skrapan och sparar den till en fil.
string dir = "c:\\temp\\";
Aspose.Imaging.ImageOptions.TiffOptions createOptions = new Aspose.Imaging.ImageOptions.TiffOptions(Imaging.FileFormats.Tiff.Enums.TiffExpectedFormat.Default);
// Set 8 bits for each color component.
createOptions.BitsPerSample = new ushort[] { 8, 8, 8 };
// Set the Big Endian byte order (Motorola)
createOptions.ByteOrder = Aspose.Imaging.FileFormats.Tiff.Enums.TiffByteOrder.BigEndian;
// Set the LZW compression.
createOptions.Compression = Aspose.Imaging.FileFormats.Tiff.Enums.TiffCompressions.Lzw;
// Set the RGB color model.
createOptions.Photometric = Aspose.Imaging.FileFormats.Tiff.Enums.TiffPhotometrics.Rgb;
// All color components will be stored within a single plane.
createOptions.PlanarConfiguration = Aspose.Imaging.FileFormats.Tiff.Enums.TiffPlanarConfigs.Contiguous;
// Create a TIFF Frame of 100x100 px.
// Note that you don't have to dispose a frame explicitly if it is included into TiffImage.
// When the container is disposed all frames will be disposed automatically.
Aspose.Imaging.FileFormats.Tiff.TiffFrame firstFrame = new Aspose.Imaging.FileFormats.Tiff.TiffFrame(createOptions, 100, 100);
// Fill the entire frame with the blue-yellow gradient.
Aspose.Imaging.Brushes.LinearGradientBrush gradientBrush = new Aspose.Imaging.Brushes.LinearGradientBrush(
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(firstFrame.Width, firstFrame.Height),
Aspose.Imaging.Color.Blue,
Aspose.Imaging.Color.Yellow);
Aspose.Imaging.Graphics graphics = new Aspose.Imaging.Graphics(firstFrame);
graphics.FillRectangle(gradientBrush, firstFrame.Bounds);
// Create a TIFF image.
using (Aspose.Imaging.FileFormats.Tiff.TiffImage tiffImage = new Aspose.Imaging.FileFormats.Tiff.TiffImage(firstFrame))
{
tiffImage.Save(dir + "output.tif");
}Constructors
TiffFrame(Stream)
Initialiserar en ny instans av Aspose.Imaging.FileFormats.Tiff.TiffFrame klass.
public TiffFrame(Stream stream)Parameters
stream Stream
Strömmen för att ladda en bild från och initialisera rampixel och palettdata med.
TiffFrame(Ström, TiffOptions)
Initialiserar en ny instans av Aspose.Imaging.FileFormats.Tiff.TiffFrame klass.
public TiffFrame(Stream stream, TiffOptions options)Parameters
stream Stream
Strömmen för att ladda en bild från och initialisera rampixel och palettdata med.
options TiffOptions
De alternativ som ska användas för den nyligen skapade ramen.
TiffFrame(Sträng)
Initialiserar en ny instans av Aspose.Imaging.FileFormats.Tiff.TiffFrame klass.
public TiffFrame(string path)Parameters
path string
Vägen för att ladda en bild från och initialisera ramar och palettdata med.
TiffFrame(Sträng, TiffOptions)
Initialiserar en ny instans av Aspose.Imaging.FileFormats.Tiff.TiffFrame klass.
public TiffFrame(string path, TiffOptions options)Parameters
path string
Vägen för att ladda en bild från och initialisera ramar och palettdata med.
options TiffOptions
De alternativ som ska användas för den nyligen skapade ramen.
TiffFrame(RasterImage)
Initialiserar en ny instans av Aspose.Imaging.FileFormats.Tiff.TiffFrame klass.
public TiffFrame(RasterImage image)Parameters
image RasterImage
Bilden för att initialisera ramar pixel och palettdata med.
Examples
Följande exempel visar hur man samlar en mutlipage TIFF från enskilda rasterbilder.
Aspose.Imaging.ImageOptions.TiffOptions createTiffOptions = new Aspose.Imaging.ImageOptions.TiffOptions(Aspose.Imaging.FileFormats.Tiff.Enums.TiffExpectedFormat.Default);
createTiffOptions.Source = new Aspose.Imaging.Sources.FileCreateSource("c:\\temp\\multipage.tif", false);
createTiffOptions.Photometric = Aspose.Imaging.FileFormats.Tiff.Enums.TiffPhotometrics.Rgb;
createTiffOptions.BitsPerSample = new ushort[] { 8, 8, 8 };
using (Aspose.Imaging.FileFormats.Tiff.TiffImage tiffImage = (Aspose.Imaging.FileFormats.Tiff.TiffImage)Image.Create(createTiffOptions, 100, 100))
{
// This is Font and Brush for drawing text on individual frames.
Aspose.Imaging.Font font = new Aspose.Imaging.Font("Arial", 64);
Aspose.Imaging.Brushes.SolidBrush brush = new Aspose.Imaging.Brushes.SolidBrush(Aspose.Imaging.Color.White);
// Create 5 frames
for (int i = 1; i <= 5; i++)
{
Aspose.Imaging.ImageOptions.PngOptions createPngOptions = new Aspose.Imaging.ImageOptions.PngOptions();
createPngOptions.Source = new Aspose.Imaging.Sources.StreamSource(new System.IO.MemoryStream());
// Create a PNG image and draw the number of page on it.
Aspose.Imaging.FileFormats.Png.PngImage pngImage = (Aspose.Imaging.FileFormats.Png.PngImage)Image.Create(createPngOptions, 100, 100);
Aspose.Imaging.Graphics gr = new Aspose.Imaging.Graphics(pngImage);
gr.DrawString(i.ToString(), font, brush, 10, 10);
// Create a frame based on the PNG image.
Aspose.Imaging.FileFormats.Tiff.TiffFrame frame = new Aspose.Imaging.FileFormats.Tiff.TiffFrame(pngImage);
// Add the frame to the TIFF image.
tiffImage.AddFrame(frame);
}
// The image was created with a single default frame. Let's remove it.
Aspose.Imaging.FileFormats.Tiff.TiffFrame activeFrame = tiffImage.ActiveFrame;
tiffImage.ActiveFrame = tiffImage.Frames[1];
tiffImage.RemoveFrame(0);
// Don't forget to dispose the frame if you won't add it to some other TiffImage
activeFrame.Dispose();
tiffImage.Save();
}TiffFrame(RasterImage och TiffOptions)
Initialiserar en ny instans av Aspose.Imaging.FileFormats.Tiff.TiffFrame klass.
public TiffFrame(RasterImage image, TiffOptions options)Parameters
image RasterImage
Bilden för att initialisera ramar pixel och palettdata med.
options TiffOptions
De alternativ som ska användas för den nyligen skapade ramen.
TiffFrame(Fördelar, int, int)
Initialiserar en ny instans av Aspose.Imaging.FileFormats.Tiff.TiffFrame klass.
public TiffFrame(TiffOptions options, int width, int height)Parameters
options TiffOptions
Framsidan av alternativen.
width int
och bredden.
height int
och höjden.
Examples
Det här exemplet visar hur man skapar en TIFF-bild från skrapan och sparar den till en fil.
string dir = "c:\\temp\\";
Aspose.Imaging.ImageOptions.TiffOptions createOptions = new Aspose.Imaging.ImageOptions.TiffOptions(Imaging.FileFormats.Tiff.Enums.TiffExpectedFormat.Default);
// Set 8 bits for each color component.
createOptions.BitsPerSample = new ushort[] { 8, 8, 8 };
// Set the Big Endian byte order (Motorola)
createOptions.ByteOrder = Aspose.Imaging.FileFormats.Tiff.Enums.TiffByteOrder.BigEndian;
// Set the LZW compression.
createOptions.Compression = Aspose.Imaging.FileFormats.Tiff.Enums.TiffCompressions.Lzw;
// Set the RGB color model.
createOptions.Photometric = Aspose.Imaging.FileFormats.Tiff.Enums.TiffPhotometrics.Rgb;
// All color components will be stored within a single plane.
createOptions.PlanarConfiguration = Aspose.Imaging.FileFormats.Tiff.Enums.TiffPlanarConfigs.Contiguous;
// Create a TIFF Frame of 100x100 px.
// Note that you don't have to dispose a frame explicitly if it is included into TiffImage.
// When the container is disposed all frames will be disposed automatically.
Aspose.Imaging.FileFormats.Tiff.TiffFrame firstFrame = new Aspose.Imaging.FileFormats.Tiff.TiffFrame(createOptions, 100, 100);
// Fill the entire frame with the blue-yellow gradient.
Aspose.Imaging.Brushes.LinearGradientBrush gradientBrush = new Aspose.Imaging.Brushes.LinearGradientBrush(
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(firstFrame.Width, firstFrame.Height),
Aspose.Imaging.Color.Blue,
Aspose.Imaging.Color.Yellow);
Aspose.Imaging.Graphics graphics = new Aspose.Imaging.Graphics(firstFrame);
graphics.FillRectangle(gradientBrush, firstFrame.Bounds);
// Create a TIFF image.
using (Aspose.Imaging.FileFormats.Tiff.TiffImage tiffImage = new Aspose.Imaging.FileFormats.Tiff.TiffImage(firstFrame))
{
tiffImage.Save(dir + "output.tif");
}Detta exempel visar hur man skapar en TIFF-bild med 2 ramar och sparar den i en fil.
string dir = "c:\\temp\\";
// Options for the first frame
Aspose.Imaging.ImageOptions.TiffOptions createOptions1 = new Aspose.Imaging.ImageOptions.TiffOptions(Imaging.FileFormats.Tiff.Enums.TiffExpectedFormat.Default);
// Set 8 bits for each color component.
createOptions1.BitsPerSample = new ushort[] { 8, 8, 8 };
// Set the Big Endian byte order (Motorola)
createOptions1.ByteOrder = Aspose.Imaging.FileFormats.Tiff.Enums.TiffByteOrder.BigEndian;
// Set the LZW compression.
createOptions1.Compression = Aspose.Imaging.FileFormats.Tiff.Enums.TiffCompressions.Lzw;
// Set the RGB color model.
createOptions1.Photometric = Aspose.Imaging.FileFormats.Tiff.Enums.TiffPhotometrics.Rgb;
// All color components will be stored within a single plane.
createOptions1.PlanarConfiguration = Aspose.Imaging.FileFormats.Tiff.Enums.TiffPlanarConfigs.Contiguous;
// Create the first TIFF frame of 100x100 px.
// Note that you don't have to dispose frames explicitly if they are included into TiffImage.
// When the container is disposed all frames will be disposed automatically.
Aspose.Imaging.FileFormats.Tiff.TiffFrame frame1 = new Aspose.Imaging.FileFormats.Tiff.TiffFrame(createOptions1, 100, 100);
// Fill the first frame with the blue-yellow gradient.
Aspose.Imaging.Brushes.LinearGradientBrush gradientBrush = new Aspose.Imaging.Brushes.LinearGradientBrush(
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(frame1.Width, frame1.Height),
Aspose.Imaging.Color.Blue,
Aspose.Imaging.Color.Yellow);
Aspose.Imaging.Graphics graphics = new Aspose.Imaging.Graphics(frame1);
graphics.FillRectangle(gradientBrush, frame1.Bounds);
// Options for the first frame
Aspose.Imaging.ImageOptions.TiffOptions createOptions2 = new Aspose.Imaging.ImageOptions.TiffOptions(Imaging.FileFormats.Tiff.Enums.TiffExpectedFormat.Default);
// Set 1 bit per pixel for a B/W image.
createOptions2.BitsPerSample = new ushort[] { 1 };
// Set the Little Endian byte order (Intel)
createOptions2.ByteOrder = Aspose.Imaging.FileFormats.Tiff.Enums.TiffByteOrder.LittleEndian;
// Set the CCITT Group 3 Fax compression.
createOptions2.Compression = Aspose.Imaging.FileFormats.Tiff.Enums.TiffCompressions.CcittFax3;
// Set the B/W color model where 0 is black, 1 is white.
createOptions2.Photometric = Aspose.Imaging.FileFormats.Tiff.Enums.TiffPhotometrics.MinIsBlack;
// Create the second TIFF frame of 200x200px.
Aspose.Imaging.FileFormats.Tiff.TiffFrame frame2 = new Aspose.Imaging.FileFormats.Tiff.TiffFrame(createOptions2, 200, 200);
// Fill the second frame with the blue-yellow gradient.
// It will be automatically converted to the B/W format due to the corresponding settings of the frame.
Aspose.Imaging.Graphics graphics2 = new Aspose.Imaging.Graphics(frame2);
graphics2.FillRectangle(gradientBrush, frame2.Bounds);
// Create a TIFF image.
using (Aspose.Imaging.FileFormats.Tiff.TiffImage tiffImage = new Aspose.Imaging.FileFormats.Tiff.TiffImage(
new Aspose.Imaging.FileFormats.Tiff.TiffFrame[] { frame1, frame2 }))
{
tiffImage.Save(dir + "output.mutliframe.tif");
}Exceptions
Valparametern är noll.
Properties
BackgroundColor
Få eller ange ett värde för bakgrundsfärgen.
public override Color BackgroundColor { get; set; }Fastighetsvärde
BitsPerPixel
Få bildbiter per pixel räkning.
public override int BitsPerPixel { get; }Fastighetsvärde
ExifData
Få eller ställa in EXIF-data från ramen.
public ExifData ExifData { get; set; }Fastighetsvärde
FrameOptions
Får rammen skapa alternativ.
public TiffOptions FrameOptions { get; }Fastighetsvärde
HasAlpha
Det får ett värde som indikerar om denna instans har alfa.
public override bool HasAlpha { get; }Fastighetsvärde
Examples
Följande exempel laddar upp en TIFF-bild och skriver ut information om rådataformat och alfa-kanal.
string dir = "c:\\temp\\";
string fileName = dir + "sample.tif";
using (Aspose.Imaging.Image image = Aspose.Imaging.Image.Load(fileName))
{
Aspose.Imaging.FileFormats.Tiff.TiffImage tiffImage = (Aspose.Imaging.FileFormats.Tiff.TiffImage)image;
// If the active TIFF frame has alpha channel, then the entire TIFF image is considered to have alpha channel.
System.Console.WriteLine("ImageFile={0}, FileFormat={1}, HasAlpha={2}", fileName, tiffImage.RawDataFormat, tiffImage.HasAlpha);
int i = 0;
foreach (Aspose.Imaging.FileFormats.Tiff.TiffFrame frame in tiffImage.Frames)
{
System.Console.WriteLine("Frame={0}, FileFormat={1}, HasAlpha={2}", ++i, frame.RawDataFormat, frame.HasAlpha);
}
}
// The output may look like this:
// ImageFile=c:\temp\sample.tif, FileFormat=RgbIndexed1Bpp, used channels: 1, HasAlpha=False
// Frame=1, FileFormat=RgbIndexed1Bpp, used channels: 1, HasAlpha=False
// Frame=2, FileFormat=RgbIndexed1Bpp, used channels: 1, HasAlpha=FalseHasTransparentColor
Det får ett värde som indikerar om bilden har en transparent färg.
public override bool HasTransparentColor { get; set; }Fastighetsvärde
Height
Få bildens höjd.
public override int Height { get; }Fastighetsvärde
HorizontalResolution
Få eller ställa in den horisontella upplösningen, i pixlar per tum, av denna Aspose.Imaging.RasterImage.
public override double HorizontalResolution { get; set; }Fastighetsvärde
Examples
Följande exempel visar hur man ställer in en horisontell/vertikal upplösning av en separat TIFF-ram.
string dir = "c:\\temp\\";
// Load a TIFF image from a file.
using (Aspose.Imaging.Image image = Aspose.Imaging.Image.Load(dir + "sample.tif"))
{
Aspose.Imaging.FileFormats.Tiff.TiffImage tiffImage = (Aspose.Imaging.FileFormats.Tiff.TiffImage)image;
int i = 0;
foreach (Aspose.Imaging.FileFormats.Tiff.TiffFrame frame in tiffImage.Frames)
{
// Get horizontal and vertical resolution of the TiffFrame.
double horizontalResolution = frame.HorizontalResolution;
double verticalResolution = frame.VerticalResolution;
System.Console.WriteLine("The horizontal resolution of frame {0}, pixels per inch: {1}", i, horizontalResolution);
System.Console.WriteLine("The vertical resolution, of frame {0}, pixels per inch: {1}", i, verticalResolution);
if (horizontalResolution != 96.0 || verticalResolution != 96.0)
{
// Use the SetResolution method for updating both resolution values in a single call.
System.Console.WriteLine("Set resolution values to 96 dpi");
frame.SetResolution(96.0, 96.0);
System.Console.WriteLine("The horizontal resolution of frame {0}, pixels per inch: {1}", i, horizontalResolution);
System.Console.WriteLine("The vertical resolution, of frame {0}, pixels per inch: {1}", i, verticalResolution);
}
++i;
}
}PathResources
Få eller sätta vägen resurser.
public List<pathresource> PathResources { get; set; }Fastighetsvärde
List ochlt; PathResource >
Examples
Transfer Clipping Paths under export från TIFF till PSD-bild.
using (var image = Image.Load("Sample.tif"))
{
image.Save("SampleWithPaths.psd", new PsdOptions());
}Följande exempel visar hur man hämtar vägar från TIFF-bilden och visar deras namn i konsolen.
using (var image = (TiffImage)Image.Load("Sample.tif"))
{
foreach (var path in image.ActiveFrame.PathResources)
{
Console.WriteLine(path.Name);
}
}Följande exempel visar hur man ändrar redan befintliga Clipping Paths. Till exempel kan du bara hålla en Clipping Path i bilden.
using (var image = (TiffImage)Image.Load("Sample.tif"))
{
var paths = image.ActiveFrame.PathResources;
image.ActiveFrame.PathResources = paths.Take(1).ToList();
image.Save();
}Följande exempel visar hur man skapar Clipping Path i TIFF-bilden. För att göra detta måste du skapa en instans av PathResource-klassen. Följande kod visar hur du kan skapa en tom väg i TIFF-bilden.
var options = new TiffOptions(TiffExpectedFormat.Default);
var frame = new TiffFrame(options, 800, 600);
using (var image = new TiffImage(frame))
{
image.ActiveFrame.PathResources = new List<pathresource>
{
new PathResource
{
BlockId = 2000,
Name = "My Clipping Path",
Records = new List<vectorpathrecord>()
}
};
image.Save("ImageWithEmptyPath.tiff");
}</vectorpathrecord></pathresource>Skapa Clipping Path manuellt.
static void Main()
{
using (var image = (TiffImage)Image.Load("Sample.tif"))
{
image.ActiveFrame.PathResources = new List<pathresource> { new PathResource
{
BlockId = 2000, // Block Id according to Photoshop specification
Name = "My Clipping Path", // Path name
Records = CreateRecords(0.2f, 0.2f, 0.8f, 0.2f, 0.8f, 0.8f, 0.2f, 0.8f) // Create path records using coordinates
}};
image.Save("ImageWithPath.tif");
}
}
private static List<vectorpathrecord> CreateRecords(params float[] coordinates)
{
var records = CreateBezierRecords(coordinates); // Create Bezier records using coordinates
records.Insert(0, new LengthRecord // LengthRecord required by Photoshop specification
{
IsOpen = false, // Lets create closed path
RecordCount = (ushort)records.Count // Record count in the path
});
return records;
}
private static List<vectorpathrecord> CreateBezierRecords(float[] coordinates)
{
return CoordinatesToPoints(coordinates)
.Select(CreateBezierRecord)
.ToList();
}
private static IEnumerable<pointf> CoordinatesToPoints(float[] coordinates)
{
for (var index = 0; index < coordinates.Length; index += 2)
yield return new PointF(coordinates[index], coordinates[index + 1]);
}
private static VectorPathRecord CreateBezierRecord(PointF point)
{
return new BezierKnotRecord { PathPoints = new[] { point, point, point } };
}</pointf></vectorpathrecord></vectorpathrecord></pathresource>VerticalResolution
Få eller ställa in den vertikala upplösningen, i pixlar per tum, av denna Aspose.Imaging.RasterImage.
public override double VerticalResolution { get; set; }Fastighetsvärde
Examples
Följande exempel visar hur man ställer in en horisontell/vertikal upplösning av en separat TIFF-ram.
string dir = "c:\\temp\\";
// Load a TIFF image from a file.
using (Aspose.Imaging.Image image = Aspose.Imaging.Image.Load(dir + "sample.tif"))
{
Aspose.Imaging.FileFormats.Tiff.TiffImage tiffImage = (Aspose.Imaging.FileFormats.Tiff.TiffImage)image;
int i = 0;
foreach (Aspose.Imaging.FileFormats.Tiff.TiffFrame frame in tiffImage.Frames)
{
// Get horizontal and vertical resolution of the TiffFrame.
double horizontalResolution = frame.HorizontalResolution;
double verticalResolution = frame.VerticalResolution;
System.Console.WriteLine("The horizontal resolution of frame {0}, pixels per inch: {1}", i, horizontalResolution);
System.Console.WriteLine("The vertical resolution, of frame {0}, pixels per inch: {1}", i, verticalResolution);
if (horizontalResolution != 96.0 || verticalResolution != 96.0)
{
// Use the SetResolution method for updating both resolution values in a single call.
System.Console.WriteLine("Set resolution values to 96 dpi");
frame.SetResolution(96.0, 96.0);
System.Console.WriteLine("The horizontal resolution of frame {0}, pixels per inch: {1}", i, horizontalResolution);
System.Console.WriteLine("The vertical resolution, of frame {0}, pixels per inch: {1}", i, verticalResolution);
}
++i;
}
}Width
Få bildens bredd.
public override int Width { get; }Fastighetsvärde
XmpData
Få eller ställa in Xmp data.
public override XmpPacketWrapper XmpData { get; set; }Fastighetsvärde
Methods
AlignResolutions()
Hjälper metod för att göra horisontella och vertikala upplösningar lika.
public void AlignResolutions()CopyFrame(TiffFrame)
Kopiera hela ramen (dupliceras).
public static TiffFrame CopyFrame(TiffFrame tiffFrame)Parameters
tiffFrame TiffFrame
Den tiff ram för att kopiera.
Returns
Den nyligen kopierade tifframen.
CreateFrameFrom(TiffFrame och TiffOptions)
Skapa ramen från den angivna tiffFrame’ med hjälp av de angivna alternativen.Pixeldata bevaras men konverteras till önskad format.
public static TiffFrame CreateFrameFrom(TiffFrame tiffFrame, TiffOptions options)Parameters
tiffFrame TiffFrame
Den tiff ram att skapa från.
options TiffOptions
De nya alternativen att använda.
Returns
Nyligen skapad ram.
Examples
Följande exempel visar hur man skapar en grayscale kopia av en befintlig ram och lägger den till en TIFF-bild.
string dir = "c:\\temp\\";
Aspose.Imaging.ImageOptions.TiffOptions createTiffOptions = new Aspose.Imaging.ImageOptions.TiffOptions(Aspose.Imaging.FileFormats.Tiff.Enums.TiffExpectedFormat.Default);
// Create a permanent, not temporary file source.
createTiffOptions.Source = new Aspose.Imaging.Sources.FileCreateSource(dir + "multipage.tif", false);
createTiffOptions.Photometric = Aspose.Imaging.FileFormats.Tiff.Enums.TiffPhotometrics.Rgb;
createTiffOptions.BitsPerSample = new ushort[] { 8, 8, 8 };
using (Aspose.Imaging.FileFormats.Tiff.TiffImage tiffImage = (Aspose.Imaging.FileFormats.Tiff.TiffImage)Image.Create(createTiffOptions, 100, 100))
{
// The linear gradient from the left-top to the right-bottom corner of the image.
Aspose.Imaging.Brushes.LinearGradientBrush brush =
new Aspose.Imaging.Brushes.LinearGradientBrush(
new Aspose.Imaging.Point(0, 0),
new Aspose.Imaging.Point(tiffImage.Width, tiffImage.Height),
Aspose.Imaging.Color.Red,
Aspose.Imaging.Color.Green);
// Fill the active frame with a linear gradient brush.
Aspose.Imaging.Graphics gr = new Aspose.Imaging.Graphics(tiffImage.ActiveFrame);
gr.FillRectangle(brush, tiffImage.Bounds);
// Grayscale options
Aspose.Imaging.ImageOptions.TiffOptions createTiffFrameOptions = new Aspose.Imaging.ImageOptions.TiffOptions(Aspose.Imaging.FileFormats.Tiff.Enums.TiffExpectedFormat.Default);
createTiffFrameOptions.Source = new Aspose.Imaging.Sources.StreamSource(new System.IO.MemoryStream());
createTiffFrameOptions.Photometric = Imaging.FileFormats.Tiff.Enums.TiffPhotometrics.MinIsBlack;
createTiffFrameOptions.BitsPerSample = new ushort[] { 8 };
// Create a grayscale copy of the active frame.
// The pixel data is preserved but converted to the desired format.
Aspose.Imaging.FileFormats.Tiff.TiffFrame grayscaleFrame = Aspose.Imaging.FileFormats.Tiff.TiffFrame.CreateFrameFrom(tiffImage.ActiveFrame, createTiffFrameOptions);
// Add the newly created frame to the TIFF image.
tiffImage.AddFrame(grayscaleFrame);
tiffImage.Save();
}Crop(Rectangle)
Skruva upp bilden.
public override void Crop(Rectangle rectangle)Parameters
rectangle Rectangle
och rektangeln.
GetOriginalOptions()
Få alternativen baserat på de ursprungliga filinställningarna.Detta kan vara användbart för att hålla bitdjup och andra parametrar av den ursprungliga bilden oförändrad.Till exempel, om vi laddar en svartvitt PNG-bild med 1 bit per pixel och sedan sparar den med hjälp avAspose.Imaging.DataStreamSupporter.Save(System.String) metod, utgången PNG bild med 8-bitars per pixel kommer att produceras.För att undvika det och spara PNG-bild med 1-bit per pixel, använd denna metod för att få motsvarande spara alternativ och passera demtill Aspose.Imaging.Image.Save(System.String,Aspose.Imaging.ImageOptionsBase) metod som andra parametrar.
public override ImageOptionsBase GetOriginalOptions()Returns
Alternativ baserade på de ursprungliga filinställningarna.
ReleaseManagedResources()
Se till att inga okontrollerade resurser släpps här, eftersom de kanske redan har släppts.
protected override void ReleaseManagedResources()RemoveMetadata()
Ta bort den här bildinstansmetadata genom att ställa in detta Aspose.Imaging.Xmp.IHasXMPData.xmpDat och WR17.Exif.IHasEksifDate. noll.
public override void RemoveMetadata()Resize(int, int, resizeType)
återställer bilden.
public override void Resize(int newWidth, int newHeight, ResizeType resizeType)Parameters
newWidth int
Den nya bredden.
newHeight int
Den nya höjden.
resizeType ResizeType
Den återställande typen.
Rotate(Float, bool, färg)
Rotera bilden runt centrum.
public override void Rotate(float angle, bool resizeProportionally, Color backgroundColor)Parameters
angle float
Den roterade vinkeln i grader. Positiva värden roterar klockvis.
resizeProportionally bool
Om du ställer in “true” har du ändrat din bildstorlek i enlighet med roterade rektangulära (kornpunkter) projektioner i annat fall som lämnar dimensioner orörda och endast interna bildinnehåll roteras.
backgroundColor Color
Färgen på bakgrunden.
SaveData(Stream)
Spara dina data.
protected override void SaveData(Stream stream)Parameters
stream Stream
Strömmen för att spara data till.
UpdateDimensions(int, int)
Uppdatera bilddimensionerna.
protected override void UpdateDimensions(int newWidth, int newHeight)Parameters
newWidth int
Den nya bilden bredd.
newHeight int
Den nya bilden höjd.
